Problem with dialup connection after bluez update

Hello.

I updated bluez packages (bluetooth 3.7-1ubuntu4, bluez-utils 3.7-1ubuntu4, libbluetooth 3.7-1) on my ubuntu box, and now dialup connection with my Pocket Pc device cannot be established. It was working like a charm before.

After many problems i have found a way to make my box discoverable and pairable, so i can pair my pocket pc and linux box.

Anyway, i cannot established dialup connection - dund is not responding at all, but it is running and listening(?)

root@abc:/etc/ppp/peers# ps aux|grep dund
root      2952  0.0  0.4   1660   484 ?        Ss   20:34   0:00 
/usr/bin/dund --listen call dun-mda-bt

dun-mda-bt is located in /etc/ppp/peers/dun-mda-bt and contains:

root@pajonk:/etc/ppp/peers# cat /etc/ppp/peers/dun-mda-bt
115200
local
noipdefault
connect "/etc/ppp/at-cmd.pl -v"
noauth
nodefaultroute
192.168.1.1:192.168.1.10
ms-dns 192.168.1.1
debug

Pocket pc tries to connect but gives an error after 5 seconds. There are no syslog and messages log entries when trying to establish connection so i don't have any info for debuging.

SDPD is offering dun profile:

Browsing FF:FF:FF:00:00:00 ...
Service Name: LAN Access Point
Service RecHandle: 0x10000
Service Class ID List:
"LAN Access Using PPP" (0x1102)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 1
Profile Descriptor List:
"LAN Access Using PPP" (0x1102)

     Version: 0x0100

Service Name: Dial-Up Networking
Service RecHandle: 0x10001
Service Class ID List:
"Dialup Networking" (0x1103)
"Generic Networking" (0x1201)
Protocol Descriptor List:
"L2CAP" (0x0100)
"RFCOMM" (0x0003)
Channel: 2
Profile Descriptor List:
"Dialup Networking" (0x1103)

     Version: 0x0100

My dongle is configures this way:

hci0: Type: USB

         BD Address: xx:xx:xx:xx:xx:xx ACL MTU: 192:8 SCO MTU: 64:8
         UP RUNNING PSCAN ISCAN
         RX bytes:323041 acl:507 sco:0 events:30529 errors:0
         TX bytes:17719 acl:494 sco:0 commands:410 errors:0

hcid.conf:

#
# HCI daemon configuration file.
#

# HCId options
options {
# Automatically initialize new devices
autoinit yes;

# Security Manager mode
# none - Security manager disabled
# auto - Use local PIN for incoming connections
# user - Always ask user for a PIN
#
security auto;

# Pairing mode
# none - Pairing disabled
# multi - Allow pairing with already paired devices
# once - Pair once and deny successive attempts
pairing multi;

# Default PIN code for incoming connections passkey "1234";
}

# Default settings for HCI devices
device {

discovto 0;

# Local device name
# %d - device id
# %h - host name
name "%h-%d";

# Local device class
class 0x100;

# Default packet type
#pkt_type DH1,DM1,HV1;

# Inquiry and Page scan
iscan enable; pscan enable;

# Default link mode
# none - no specific policy
# accept - always accept incoming connections
# master - become master on incoming connections,
# deny role switch on outgoing connections
lm accept,master;

# Default link policy
# none - no specific policy
# rswitch - allow role switch
# hold - allow hold mode
# sniff - allow sniff mode
# park - allow park mode
lp rswitch,hold,sniff,park;
}

Thanks for any help!

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users