: CM-x270 MTD driver
Subsystems (2)
PATCH 1/1 : CM-x270 MTD driver
This patch provides MTD support for NAND flash devices on CM-x270 modules.
Signed-off-by Mike Rapoport <[email protected]>
Signature · 2 lines
Sincerely yours, Mike.
drivers/mtd/nand/Kconfig | 5 + drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/cmx270_nand.c | 267 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 273 insertions(+), 0 deletions(-)
drivers/mtd/nand/Kconfig +5 -0
@@ -252,6 +252,11 @@ config MTD_NAND_AT91 Enables support for NAND Flash / Smart Media Card interface on Atmel AT91 processors. +config MTD_NAND_CM_X270 + tristate "Support for NAND Flash on CM-X270 modules" + depends on MTD_NAND && MACH_ARMCORE + + config MTD_NAND_NANDSIM tristate "Support for NAND Flash Simulator" depends on MTD_NAND && MTD_PARTITIONS
drivers/mtd/nand/Makefile +1 -0
@@ -24,6 +24,7 @@ obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o obj-$(CONFIG_MTD_NAND_AT91) += at91_nand.o +obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o nand-objs := nand_base.o nand_bbt.o
drivers/mtd/nand/cmx270_nand.c new file +267 -0
267 lines not on this page · raw message