Skip to contentSkip to conversation

A starter of porting u-boot to a new boar d

U-Boot-Users yeshi208 at 126.com 2 participants 5 messages Apr 27, 2007 – Apr 29, 2007 3 messages not in the archive

lore
Share & tools
lore
#0 lore raw

Hello:
I am a newbie to use u-boot, and I have browse the readme file in the source directory. Now I want to port u-boot to a new board. But I do not know the step exactly.Could some good people tell me where should I start from:) The CPU is SEP3203F50 using ARM7TDMI core, and for the first time I want to make a u-boot.bin file to write into flash. The bin file could not surport net.

Best Wishs

yeshi

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070427/cbb2376a/attachment.htm

#1 lore raw
Quoted 8 lines · On 4/27/07, yeshi208 at 126.com <[email protected]> wrote:

Hello:
I am a newbie to use u-boot, and I have browse the readme file in the
source directory. Now I want to port u-boot to a new board. But I do not know the step exactly.Could some good people tell me where should I start from:)
The CPU is SEP3203F50 using ARM7TDMI core, and for the first time I want
to make a u-boot.bin file to write into flash. The bin file could not surport net.

I guess the README has already provided sufficient information to start, right? You can start copy a similar board (regarding CPU architecture, SoC, and peripherals on board) directory within board/ and rename it to yours, and copy a similar board config header file within include/configs/, then you start with ./mkconfig

Quoted 21 lines

Best Wishs

yeshi

________________________________
????2006????????--????
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw

[U-Boot-Users] A starter of por ting u-boot to a new boar d

I'm not sure which exception you are experiencing, but most likely to be a data abort which happens if the access is beyond valid address space

please have a check with your board/xxxx/config.mk and see if TEXT_BASE is pointed to a valid address, usually the address you want your u-boot to be running at.

If your boot-up process will involve a relocation from flash to RAM, please also check you enabled that relocation process, it's usually controlled by some macro, whic I dont' remember clearly

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#6 lore raw

[U-Boot-Users] 回复: Re: A starter of por ting u-bo ot to a new boar d

Sorry , first time to use maillist, and forget to CC u-boot-users at lists.sourceforge.net.:)
Remap SDRAM to 0x0000,0000 does not overwrite the flash space.But I am not sure if this is the problem. I modify the code to see if it's the problem. -------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070429/229ff6f3/attachment.htm

#7 lore raw

[U-Boot-Users] A starter of por ting u-bo ot to a new boar d

Again, if you remap SDRAM to 0x0000,0000, your text address base could be most likely wrong, note that TEXT_ADDR is where your u-boot will be at run time

Quoted 10 lines · On 4/29/07, yeshi208 at 126.com <[email protected]> wrote:

Sorry , first time to use maillist, and forget to CC u-boot-users at lists.sourceforge.net.:)

Remap SDRAM to 0x0000,0000 does not overwrite the flash space.But I am not sure if this is the problem. I modify the code to see if it's the problem.

________________________________
????2006????????--????