Skip to contentSkip to conversation

Unlikely big volume range Plantronics BT300

DISCUSSION Dennis Kadioglu 2 participants 3 messages Apr 7, 2016 – May 8, 2016

lore
Share & tools
lore
#0 lore raw

Hi,

when I connect the bluetooth BT300 of my Plantronics Headset I can see the following warning:

[172855.985539] usb 2-1.3: Warning! Unlikely big volume range (=720), cval->res is probably wrong.
[172855.985544] usb 2-1.3: [5] FU [PCM Playback Volume] ch = 1, val = -10240/1280/16

As far as I understand it, the problem may be solved by applying a quirk which is already applied for Logitech webcams. Can somebody help me in finding out the correct value for cval->res. I have no clue which calculations are necessary for that.

Thanks in advance.
Dennis Kadioglu

#1 lore raw
Quoted 5 lines · Dennis Kadioglu

when I connect the bluetooth BT300 of my Plantronics Headset I can see the following warning:

[172855.985539] usb 2-1.3: Warning! Unlikely big volume range (=720), cval->res is probably wrong.

As far as I understand it, the problem

What problem? Doesn't the mixer control work correctly?

Regards,
Clemens

#2 lore raw

Hi Clemens,

Apologies for my late reply! The mail got lost in my inbox.

Quoted 1 line

What problem? Doesn't the mixer control work correctly?

As far as I can tell the mixer works as it should. I was just curious about the meaning of this warning and tried to fix it. Sadly I was not able to find out, which calculations using which parameters are necessary to get a correct value for cval->res. I would be glad, if you could give me some hints.

Thanks and best
Dennis

----- Ursprüngliche Mail -----
Von: "Clemens Ladisch" <[email protected]>
An: "Dennis Kadioglu" <[email protected]>, [email protected]
Gesendet: Donnerstag, 7. April 2016 08:47:39
Betreff: Re: [alsa-devel] Unlikely big volume range Plantronics BT300

Quoted 5 lines · Dennis Kadioglu

when I connect the bluetooth BT300 of my Plantronics Headset I can see the following warning:

[172855.985539] usb 2-1.3: Warning! Unlikely big volume range (=720), cval->res is probably wrong.

As far as I understand it, the problem

What problem? Doesn't the mixer control work correctly?

Regards,
Clemens
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel