display for osk5912 boards ?

Hi,

I have a Omap5912-OSK board without a display.
I would like to know if any one out there has been able to connect a Dispay to the OSK and run any GUI applications on it. I would also like to know if there are any vendors who can provide me with a display which works with OSK5912 boards. What effort will it take to enable the display in the 2.6 kernel ?

Thanks and Warm Regards,
Zaheer.

DISCLAIMER:
This message (including attachment if any) is confidential and may be privileged. Before opening attachments please check them for viruses and defects. MindTree Consulting Limited (MindTree) will not be responsible for any viruses or defects or any forwarded attachments emanating either from within MindTree or outside. If you have received this message by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. Please note that e-mails are susceptible to change and MindTree shall not be liable for any improper, untimely or incomplete transmission.

Mistral sells a fairly expensive QVGA LCD with touchscreen
http://www.mistralsoftware.com/html/product/omap_products/products-omap5
912_starterkit.php.

There is already support in the 2.6 kernels for this.

Steve K.

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Zaheer
Sent: Wednesday, May 09, 2007 1:44 AM
To: [email protected]
Subject: display for osk5912 boards ?

Hi,

I have a Omap5912-OSK board without a display.
I would like to know if any one out there has been able to connect a Dispay to the OSK and run any GUI applications on it.
I would also like to know if there are any vendors who can provide me with a display which works with OSK5912 boards.
What effort will it take to enable the display in the 2.6 kernel ?

Thanks and Warm Regards,
Zaheer.

DISCLAIMER:
This message (including attachment if any) is confidential and may be privileged. Before opening attachments please check them for viruses and defects. MindTree Consulting Limited (MindTree) will not be responsible for any viruses or defects or any forwarded attachments emanating either from within MindTree or outside. If you have received this message by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. Please note that e-mails are susceptible to change and MindTree shall not be liable for any improper, untimely or incomplete transmission.
_______________________________________________
Linux-omap-open-source mailing list [email protected]
http://linux.omap.com/mailman/listinfo/linux-omap-open-source

And there is an "Aditec Graphic LCD Module (AGLM)". See

http://tree.celinuxforum.org/CelfPubWiki/OSK

Dirk

Hello All,

I went through these links before, and did not find it to be affordable. I am looking out for some non-expensive displays.
I would like to know if any one has used any other displays.

Any one knows which displays other than the below mentioned are supported on the OSK5912 boards.

Warm Regards,
Zaheer.

DISCLAIMER:
This message (including attachment if any) is confidential and may be privileged. Before opening attachments please check them for viruses and defects. MindTree Consulting Limited (MindTree) will not be responsible for any viruses or defects or any forwarded attachments emanating either from within MindTree or outside. If you have received this message by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. Please note that e-mails are susceptible to change and MindTree shall not be liable for any improper, untimely or incomplete transmission.

Dear All,

I had full schematic and Linux drivers for this display board. Please ask me if you want ,full free.

Best regards
Andy.Lu
(Lu ZhiQing)

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Zaheer
Sent: May 10, 2007 11:51 AM
To: Dirk Behme
Cc: [email protected]
Subject: Re: display for osk5912 boards ?

Hello All,

I went through these links before, and did not find it to be affordable. I am looking out for some non-expensive displays.
I would like to know if any one has used any other displays.

Any one knows which displays other than the below mentioned are supported on the OSK5912 boards.

Warm Regards,
Zaheer.

transmission.

DISCLAIMER:
This message (including attachment if any) is confidential and may be privileged. Before opening attachments please check them for viruses and defects. MindTree Consulting Limited (MindTree) will not be responsible for any viruses or defects or any forwarded attachments emanating either from within MindTree or outside. If you have received this message by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited. Please note that e-mails are susceptible to change and MindTree shall not be liable for any improper, untimely or incomplete transmission.
_______________________________________________
Linux-omap-open-source mailing list [email protected]
http://linux.omap.com/mailman/listinfo/linux-omap-open-source