spelling fixes: arch/blackfin/
PATCH 1/1 spelling fixes: arch/blackfin/
Spelling fixes in arch/blackfin/.
---
arch/blackfin/kernel/irqchip.c | 2 +- arch/blackfin/kernel/traps.c | 2 +- arch/blackfin/mach-bf533/boards/cm_bf533.c | 2 +- arch/blackfin/mach-bf533/boards/ezkit.c | 2 +- arch/blackfin/mach-bf533/ints-priority.c | 2 +- arch/blackfin/mach-bf537/boards/generic_board.c | 2 +- arch/blackfin/mach-bf537/boards/pnav10.c | 2 +- arch/blackfin/mach-bf537/boards/stamp.c | 2 +- arch/blackfin/mach-bf537/ints-priority.c | 2 +- arch/blackfin/mach-bf561/boards/cm_bf561.c | 4 ++-- arch/blackfin/mach-bf561/ints-priority.c | 2 +- arch/blackfin/mach-common/ints-priority-dc.c | 2 +- arch/blackfin/mach-common/ints-priority-sc.c | 2 +- arch/blackfin/mm/blackfin_sram.c | 6 +++--- 14 files changed, 17 insertions(+), 17 deletions(-)
arch/blackfin/kernel/irqchip.c +0 -0
@@ -91,7 +91,7 @@ int show_interrupts(struct seq_file *p, void *v)
}
/*
- * do_IRQ handles all hardware IRQ's. Decoded IRQs should not
+ * do_IRQ handles all hardware IRQs. Decoded IRQs should not
* come via this function. Instead, they should provide their
* own 'handler'
*/
arch/blackfin/kernel/traps.c +0 -0
@@ -549,7 +549,7 @@ void dump_bfin_regs(struct pt_regs *fp, void *retaddr)
break; #ifndef CONFIG_DEBUG_HWERR /* If one of the last few instructions was a STI - * it is likily that the error occured awhile ago + * it is likely that the error occurred awhile ago * and we just noticed */ if (x >= 0x0040 && x <= 0x0047 && i <= 0)
arch/blackfin/mach-bf533/boards/cm_bf533.c +0 -0
@@ -1,7 +1,7 @@
/*
* File: arch/blackfin/mach-bf533/boards/cm_bf533.c
* Based on: arch/blackfin/mach-bf533/boards/ezkit.c
- * Author: Aidan Williams <[email protected]> Copright 2005
+ * Author: Aidan Williams <[email protected]> Copyright 2005
*
* Created: 2005
* Description: Board description file
arch/blackfin/mach-bf533/boards/ezkit.c +0 -0
@@ -1,6 +1,6 @@
/*
* File: arch/blackfin/mach-bf533/ezkit.c
- * Based on: Orginal Work
+ * Based on: Original Work
* Author: Aidan Williams <[email protected]>
*
* Created: 2005
arch/blackfin/mach-bf533/ints-priority.c +1 -1
@@ -4,7 +4,7 @@* Author: Michael Hennerich * * Created: ? -* Description: Set up the interupt priorities +* Description: Set up the interrupt priorities * * Modified: * Copyright 2004-2006 Analog Devices Inc.
arch/blackfin/mach-bf537/boards/generic_board.c +0 -0
@@ -55,7 +55,7 @@ static struct resource bfin_pcmcia_cf_resources[] = {
.end = 0x20312000,
.flags = IORESOURCE_MEM,
},{
- .start = 0x20311000, /* Attribute Memeory */
+ .start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
},{arch/blackfin/mach-bf537/boards/pnav10.c +0 -0
@@ -59,7 +59,7 @@ static struct resource bfin_pcmcia_cf_resources[] = {
.end = 0x20312000,
.flags = IORESOURCE_MEM,
},{
- .start = 0x20311000, /* Attribute Memeory */
+ .start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
},{arch/blackfin/mach-bf537/boards/stamp.c +0 -0
@@ -108,7 +108,7 @@ static struct resource bfin_pcmcia_cf_resources[] = {
.end = 0x20312000,
.flags = IORESOURCE_MEM,
},{
- .start = 0x20311000, /* Attribute Memeory */
+ .start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
},{arch/blackfin/mach-bf537/ints-priority.c +1 -1
@@ -4,7 +4,7 @@* Author: Michael Hennerich * * Created: -* Description: Set up the interupt priorities +* Description: Set up the interrupt priorities * * Modified: * Copyright 2004-2006 Analog Devices Inc.
arch/blackfin/mach-bf561/boards/cm_bf561.c +0 -0
@@ -1,7 +1,7 @@
/*
* File: arch/blackfin/mach-bf533/boards/cm_bf561.c
* Based on: arch/blackfin/mach-bf533/boards/ezkit.c
- * Author: Aidan Williams <[email protected]> Copright 2005
+ * Author: Aidan Williams <[email protected]> Copyright 2005
*
* Created: 2006
* Description: Board description file
@@ -43,7 +43,7 @@
char *bfin_board_name = "Bluetechnix CM BF561";
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI perpherals info goes here */
+/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = {
arch/blackfin/mach-bf561/ints-priority.c +1 -1
@@ -4,7 +4,7 @@* Author: Michael Hennerich * * Created: -* Description: Set up the interupt priorities +* Description: Set up the interrupt priorities * * Modified: * Copyright 2004-2006 Analog Devices Inc.
arch/blackfin/mach-common/ints-priority-dc.c +1 -1
@@ -4,7 +4,7 @@* Author: * * Created: ? -* Description: Set up the interupt priorities +* Description: Set up the interrupt priorities * * Modified: * 1996 Roman Zippel
arch/blackfin/mach-common/ints-priority-sc.c +1 -1
@@ -4,7 +4,7 @@* Author: * * Created: ? -* Description: Set up the interupt priorities +* Description: Set up the interrupt priorities * * Modified: * 1996 Roman Zippel
arch/blackfin/mm/blackfin_sram.c +0 -0
@@ -149,7 +149,7 @@ static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count)
size = (size + 3) & ~3;
/* not use the good method to match the best slot !!! */
- /* search an available memeory slot */
+ /* search an available memory slot */
for (i = 0; i < count; i++) {
if ((pfree[i].flag == SRAM_SLT_FREE)
&& (pfree[i].size >= size)) {
@@ -162,7 +162,7 @@ static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count)
if (i >= count)
return NULL;- /* updated the NULL memeory slot !!! */
+ /* updated the NULL memory slot !!! */
if (pfree[i].size > size) {
for (i = 0; i < count; i++) {
if (pfree[i].flag == SRAM_SLT_NULL) {
@@ -186,7 +186,7 @@ static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count,
int i, index = -1;
void *addr = NULL;- /* search an available memeory slot */
+ /* search an available memory slot */
for (i = 0; i < count; i++) {
if (pfree[i].flag == SRAM_SLT_FREE && pfree[i].size > best) {
addr = pfree[i].paddr;Signature · 4 lines
1.5.0.1 -- Simon Arlott