spelling fixes: arch/parisc/
PATCH 1/1 spelling fixes: arch/parisc/
Spelling fixes in arch/parisc/.
---
arch/parisc/kernel/firmware.c | 4 ++-- arch/parisc/kernel/perf.c | 12 ++++++------ arch/parisc/kernel/processor.c | 8 ++++---- arch/parisc/kernel/setup.c | 2 +- arch/parisc/kernel/signal32.h | 2 +- arch/parisc/kernel/smp.c | 6 +++--- arch/parisc/kernel/time.c | 2 +- arch/parisc/kernel/traps.c | 2 +- arch/parisc/math-emu/dbl_float.h | 4 ++-- arch/parisc/math-emu/dfsqrt.c | 2 +- arch/parisc/math-emu/sfsqrt.c | 2 +- arch/parisc/math-emu/sgl_float.h | 4 ++-- arch/parisc/mm/init.c | 10 +++++----- 13 files changed, 30 insertions(+), 30 deletions(-)
arch/parisc/kernel/firmware.c +2 -2
@@ -634,7 +634,7 @@ EXPORT_SYMBOL(pdc_lan_station_id);* pdc_stable_read - Read data from Stable Storage. * @staddr: Stable Storage address to access. * @memaddr: The memory address where Stable Storage data shall be copied. -* @count: number of bytes to transfert. count is multiple of 4. +* @count: number of bytes to transfer. count is multiple of 4. * * This PDC call reads from the Stable Storage address supplied in staddr * and copies count bytes to the memory address memaddr.
@@ -660,7 +660,7 @@ EXPORT_SYMBOL(pdc_stable_read);* pdc_stable_write - Write data to Stable Storage. * @staddr: Stable Storage address to access. * @memaddr: The memory address where Stable Storage data shall be read from. -* @count: number of bytes to transfert. count is multiple of 4. +* @count: number of bytes to transfer. count is multiple of 4. * * This PDC call reads count bytes from the supplied memaddr address, * and copies count bytes to the Stable Storage address staddr.
arch/parisc/kernel/perf.c +0 -0
@@ -171,7 +171,7 @@ static const uint64_t perf_bitmasks[] = {
/*
* Write control bitmasks for Pa-8700 processor given
- * somethings have changed slightly.
+ * some things have changed slightly.
*/
static const uint64_t perf_bitmasks_piranha[] = {
0x0000000000000000ul, /* first dbl word must be zero */
@@ -574,27 +574,27 @@ static int perf_stop_counters(uint32_t *raddr)
if (!perf_rdr_read_ubuf(16, userbuf))
return -13;- /* Counter0 is bits 1398 thru 1429 */
+ /* Counter0 is bits 1398 to 1429 */
tmp64 = (userbuf[21] << 22) & 0x00000000ffc00000; tmp64 |= (userbuf[22] >> 42) & 0x00000000003fffff; /* OR sticky0 (bit 1430) to counter0 bit 32 */ tmp64 |= (userbuf[22] >> 10) & 0x0000000080000000; raddr[0] = (uint32_t)tmp64;
- /* Counter1 is bits 1431 thru 1462 */
+ /* Counter1 is bits 1431 to 1462 */
tmp64 = (userbuf[22] >> 9) & 0x00000000ffffffff; /* OR sticky1 (bit 1463) to counter1 bit 32 */ tmp64 |= (userbuf[22] << 23) & 0x0000000080000000; raddr[1] = (uint32_t)tmp64;
- /* Counter2 is bits 1464 thru 1495 */
+ /* Counter2 is bits 1464 to 1495 */
tmp64 = (userbuf[22] << 24) & 0x00000000ff000000; tmp64 |= (userbuf[23] >> 40) & 0x0000000000ffffff; /* OR sticky2 (bit 1496) to counter2 bit 32 */ tmp64 |= (userbuf[23] >> 8) & 0x0000000080000000; raddr[2] = (uint32_t)tmp64;
- /* Counter3 is bits 1497 thru 1528 */
+ /* Counter3 is bits 1497 to 1528 */
tmp64 = (userbuf[23] >> 7) & 0x00000000ffffffff; /* OR sticky3 (bit 1529) to counter3 bit 32 */ tmp64 |= (userbuf[23] << 25) & 0x0000000080000000; @@ -616,7 +616,7 @@ static int perf_stop_counters(uint32_t *raddr) userbuf[23] = 0; /* - * Write back the zero'ed bytes + the image given + * Write back the zeroed bytes + the image given * the read was destructive. */ perf_rdr_write(16, userbuf);
arch/parisc/kernel/processor.c +0 -0
@@ -63,7 +63,7 @@ extern int update_cr16_clocksource(void); /* from time.c */
** will call register_parisc_driver(&cpu_driver) before calling do_inventory(). **
** The goal of consolidating CPU initialization into one place is -** to make sure all CPU's get initialized the same way.
+** to make sure all CPUs get initialized the same way.
** The code path not shared is how PDC hands control of the CPU to the OS. ** The initialization of OS data structures is the same (done below). */
@@ -166,7 +166,7 @@ static int __init processor_probe(struct parisc_device *dev) #endif
/* - ** CONFIG_SMP: init_smp_config() will attempt to get CPU's into + ** CONFIG_SMP: init_smp_config() will attempt to get CPUs into ** OS control. RENDEZVOUS is the default state - see mem_set above. ** p->state = STATE_RENDEZVOUS; */
@@ -334,7 +334,7 @@ int __init init_per_cpu(int cpunum) }
/*
- * Display cpu info for all cpu's.
+ * Display CPU info for all CPUs.
*/
intshow_cpuinfo (struct seq_file *m, void *v)
@@ -393,7 +393,7 @@ static struct parisc_driver cpu_driver __read_mostly = { };
/**
- * processor_init - Processor initalization procedure.
+ * processor_init - Processor initialization procedure. *
* Register this driver.
*/
arch/parisc/kernel/setup.c +0 -0
@@ -162,7 +162,7 @@ void __init setup_arch(char **cmdline_p)
}
/*
- * Display cpu info for all cpu's.
+ * Display CPU info for all CPUs.
* for parisc this is in processor.c
*/
extern int show_cpuinfo (struct seq_file *m, void *v);
arch/parisc/kernel/signal32.h +0 -0
@@ -113,7 +113,7 @@ int copy_siginfo_from_user32 (siginfo_t *to, compat_siginfo_t __user *from);
/* In a deft move of uber-hackery, we decide to carry the top half of all
* 64-bit registers in a non-portable, non-ABI, hidden structure.
* Userspace can read the hidden structure if it *wants* but is never
- * guaranteed to be in the same place. Infact the uc_sigmask from the
+ * guaranteed to be in the same place. In fact the uc_sigmask from the
* ucontext_t structure may push the hidden register file downards */
struct compat_regfile {
arch/parisc/kernel/smp.c +0 -0
@@ -8,7 +8,7 @@
** Lots of stuff stolen from arch/alpha/kernel/smp.c
** ...and then parisc stole from arch/ia64/kernel/smp.c. Thanks David! :^) **
-** Thanks to John Curry and Ullas Ponnadi. I learned alot from their work. +** Thanks to John Curry and Ullas Ponnadi. I learned a lot from their work. ** -grant (1/12/2001)
**
** This program is free software; you can redistribute it and/or modify
@@ -419,7 +419,7 @@ smp_cpu_init(int cpunum)
BUG(); enter_lazy_tlb(&init_mm, current);
- init_IRQ(); /* make sure no IRQ's are enabled or pending */
+ init_IRQ(); /* make sure no IRQs are enabled or pending */
start_cpu_itimer(); }
@@ -552,7 +552,7 @@ void __devinit smp_prepare_boot_cpu(void)
/*
** inventory.c:do_inventory() hasn't yet been run and thus we -** don't 'discover' the additional CPU's until later. +** don't 'discover' the additional CPUs until later. */
void __init smp_prepare_cpus(unsigned int max_cpus) {
arch/parisc/kernel/time.c +0 -0
@@ -191,7 +191,7 @@ int update_cr16_clocksource(void)
{
int change = 0;- /* since the cr16 cycle counters are not syncronized across CPUs,
+ /* since the cr16 cycle counters are not synchronized across CPUs,
we'll check if we should switch to a safe clocksource: */
if (clocksource_cr16.rating != 0 && num_online_cpus() > 1) {
clocksource_change_rating(&clocksource_cr16, 0);arch/parisc/kernel/traps.c +0 -0
@@ -615,7 +615,7 @@ void handle_interruption(int code, struct pt_regs *regs)
case 13:
/* Conditional Trap
- The condition succees in an instruction which traps + The condition succeeds in an instruction which traps
on condition */
if(user_mode(regs)){
si.si_signo = SIGFPE;arch/parisc/math-emu/dbl_float.h +0 -0
@@ -22,7 +22,7 @@ PA header file -- do not include this header file for non-PA builds.
#endif
-/* 32-bit word grabing functions */
+/* 32-bit word grabbing functions */
#define Dbl_firstword(value) Dallp1(value)
#define Dbl_secondword(value) Dallp2(value)
#define Dbl_thirdword(value) dummy_location
@@ -37,7 +37,7 @@
#define Dbl_allp1(object) Dallp1(object)
#define Dbl_allp2(object) Dallp2(object)
-/* dbl_and_signs ands the sign bits of each argument and puts the result +/* dbl_and_signs ANDs the sign bits of each argument and puts the result
* into the first argument. dbl_or_signs ors those same sign bits */
#define Dbl_and_signs( src1dst, src2) \
Dallp1(src1dst) = (Dallp1(src2)|~((unsigned int)1<<31)) & Dallp1(src1dst)arch/parisc/math-emu/dfsqrt.c +1 -1
@@ -76,7 +76,7 @@ dbl_fsqrt( }/* * Return quiet NaN or positive infinity. -* Fall thru to negative test if negative infinity. +* Fall through to negative test if negative infinity. */
if (Dbl_iszero_sign(srcp1) ||
Dbl_isnotzero_mantissa(srcp1,srcp2)) {arch/parisc/math-emu/sfsqrt.c +1 -1
@@ -76,7 +76,7 @@ sgl_fsqrt( }/* * Return quiet NaN or positive infinity. -* Fall thru to negative test if negative infinity. +* Fall through to negative test if negative infinity. */
if (Sgl_iszero_sign(src) || Sgl_isnotzero_mantissa(src)) {
*dstptr = src;arch/parisc/math-emu/sgl_float.h +0 -0
@@ -23,7 +23,7 @@ PA header file -- do not include this header file for non-PA builds.
#endif
-/* 32-bit word grabing functions */
+/* 32-bit word grabbing functions */
#define Sgl_firstword(value) Sall(value)
#define Sgl_secondword(value) dummy_location
#define Sgl_thirdword(value) dummy_location
@@ -36,7 +36,7 @@
#define Sgl_exponentmantissa(object) Sexponentmantissa(object) #define Sgl_all(object) Sall(object)
-/* sgl_and_signs ands the sign bits of each argument and puts the result +/* sgl_and_signs ANDs the sign bits of each argument and puts the result
* into the first argument. sgl_or_signs ors those same sign bits */
#define Sgl_and_signs( src1dst, src2) \
Sall(src1dst) = (Sall(src2)|~((unsigned int)1<<31)) & Sall(src1dst)arch/parisc/mm/init.c +0 -0
@@ -890,7 +890,7 @@ void __init paging_init(void)
#ifdef CONFIG_PA20
/*
- * Currently, all PA20 chips have 18 bit protection id's, which is the
+ * Currently, all PA20 chips have 18 bit protection IDs, which is the
* limiting factor (space ids are 32 bits).
*/
@@ -899,10 +899,10 @@ void __init paging_init(void) #else
/*
- * Currently we have a one-to-one relationship between space id's and
- * protection id's. Older parisc chips (PCXS, PCXT, PCXL, PCXL2) only
- * support 15 bit protection id's, so that is the limiting factor.
- * PCXT' has 18 bit protection id's, but only 16 bit spaceids, so it's
+ * Currently we have a one-to-one relationship between space IDs and
+ * protection IDs. Older parisc chips (PCXS, PCXT, PCXL, PCXL2) only
+ * support 15 bit protection IDs, so that is the limiting factor.
+ * PCXT' has 18 bit protection IDs, but only 16 bit spaceids, so it's
* probably not worth the effort for a special case here.
*/
Signature · 4 lines
1.5.0.1 -- Simon Arlott
Quoted 3 lines · Simon Arlott
Spelling fixes in
arch/parisc/.Signed-off-by Simon Arlott <[email protected]>
thanks!
grant
Quoted 330 lines
---
arch/parisc/kernel/firmware.c | 4 ++-- arch/parisc/kernel/perf.c | 12 ++++++------ arch/parisc/kernel/processor.c | 8 ++++---- arch/parisc/kernel/setup.c | 2 +- arch/parisc/kernel/signal32.h | 2 +- arch/parisc/kernel/smp.c | 6 +++--- arch/parisc/kernel/time.c | 2 +- arch/parisc/kernel/traps.c | 2 +- arch/parisc/math-emu/dbl_float.h | 4 ++-- arch/parisc/math-emu/dfsqrt.c | 2 +- arch/parisc/math-emu/sfsqrt.c | 2 +- arch/parisc/math-emu/sgl_float.h | 4 ++-- arch/parisc/mm/init.c | 10 +++++----- 13 files changed, 30 insertions(+), 30 deletions(-)arch/parisc/kernel/firmware.c +2
-2@@ -634,7 +634,7 @@ EXPORT_SYMBOL(pdc_lan_station_id);* pdc_stable_read - Read data from Stable Storage. * @staddr: Stable Storage address to access. * @memaddr: The memory address where Stable Storage data shall be copied. -* @count: number of bytes to transfert. count is multiple of 4. +* @count: number of bytes to transfer. count is multiple of 4. * * This PDC call reads from the Stable Storage address supplied in staddr * and copies count bytes to the memory address memaddr. @@ -660,7 +660,7 @@ EXPORT_SYMBOL(pdc_stable_read);* pdc_stable_write - Write data to Stable Storage. * @staddr: Stable Storage address to access. * @memaddr: The memory address where Stable Storage data shall be read from. -* @count: number of bytes to transfert. count is multiple of 4. +* @count: number of bytes to transfer. count is multiple of 4. * * This PDC call reads count bytes from the supplied memaddr address, * and copies count bytes to the Stable Storage address staddr.
arch/parisc/kernel/perf.c +6
-6@@ -171,7 +171,7 @@ static const uint64_t perf_bitmasks[] = {/* * Write control bitmasks for Pa-8700 processor given -* somethings have changed slightly. +* some things have changed slightly. */ static const uint64_t perf_bitmasks_piranha[] = {0x0000000000000000ul ,/* first dbl word must be zero */ @@ -574,27 +574,27 @@ static int perf_stop_counters(uint32_t *raddr)if (!perf_rdr_read_ubuf (16 , userbuf))return -13 ; -/* Counter0 is bits 1398 thru 1429 */ +/* Counter0 is bits 1398 to 1429 */ tmp64 = (userbuf[21 ] <<22 ) &0x00000000ffc00000 ; tmp64 |= (userbuf[22 ] >>42 ) &0x00000000003fffff ;/* OR sticky0 (bit 1430) to counter0 bit 32 */ tmp64 |= (userbuf[22 ] >>10 ) &0x0000000080000000 ; raddr[0 ] = (uint32_t )tmp64; -/* Counter1 is bits 1431 thru 1462 */ +/* Counter1 is bits 1431 to 1462 */ tmp64 = (userbuf[22 ] >>9 ) &0x00000000ffffffff ;/* OR sticky1 (bit 1463) to counter1 bit 32 */ tmp64 |= (userbuf[22 ] <<23 ) &0x0000000080000000 ; raddr[1 ] = (uint32_t )tmp64; -/* Counter2 is bits 1464 thru 1495 */ +/* Counter2 is bits 1464 to 1495 */ tmp64 = (userbuf[22 ] <<24 ) &0x00000000ff000000 ; tmp64 |= (userbuf[23 ] >>40 ) &0x0000000000ffffff ;/* OR sticky2 (bit 1496) to counter2 bit 32 */ tmp64 |= (userbuf[23 ] >>8 ) &0x0000000080000000 ; raddr[2 ] = (uint32_t )tmp64; -/* Counter3 is bits 1497 thru 1528 */ +/* Counter3 is bits 1497 to 1528 */ tmp64 = (userbuf[23 ] >>7 ) &0x00000000ffffffff ;/* OR sticky3 (bit 1529) to counter3 bit 32 */ tmp64 |= (userbuf[23 ] <<25 ) &0x0000000080000000 ;@@ -616,7 +616,7 @@ static int perf_stop_counters(uint32_t *raddr) userbuf[23 ] =0 ;/* -* Write back the zero'ed bytes + the image given +* Write back the zeroed bytes + the image given * the read was destructive. */ perf_rdr_write (16 , userbuf);arch/parisc/kernel/processor.c +0
-0@@ -63,7 +63,7 @@ extern int update_cr16_clocksource(void); /* from
time.c*/
** will callregister_parisc_driver(&cpu_driver)before callingdo_inventory().
**
** The goal of consolidating CPU initialization into one place isarch/parisc/kernel/processor.c +1
-1-** to make sure all CPU's get initialized the same way. +** to make sure all CPUs get initialized the same way.** The code path not shared is how PDC hands control of the CPU to the OS. ** The initialization of OS data structures is the same (done below). */
arch/parisc/kernel/processor.c +1
-1@@ -166,7 +166,7 @@ static int __init processor_probe(struct parisc_device *dev)#endif /* -** CONFIG_SMP: init_smp_config() will attempt to get CPU's into +** CONFIG_SMP: init_smp_config() will attempt to get CPUs into ** OS control. RENDEZVOUS is the default state - see mem_set above. ** p->state = STATE_RENDEZVOUS; */arch/parisc/kernel/processor.c +1
-1@@ -334,7 +334,7 @@ int __init init_per_cpu(int cpunum) }/* -* Display cpu info for all cpu's. +* Display CPU info for all CPUs. */ int
show_cpuinfo(structseq_file*m, void *v)arch/parisc/kernel/processor.c +1
-1@@ -393,7 +393,7 @@ static struct parisc_driver cpu_driver __read_mostly = { };/** -* processor_init - Processor initalization procedure. +* processor_init - Processor initialization procedure. * * Register this driver. */ arch/parisc/kernel/setup.c +1
-1@@ -162,7 +162,7 @@ void __init setup_arch(char **cmdline_p) }/* -* Display cpu info for all cpu's. +* Display CPU info for all CPUs. * for parisc this is in processor.c */ extern int show_cpuinfo (struct seq_file *m,void *v);arch/parisc/kernel/signal32.h +1
-1@@ -113,7 +113,7 @@ int copy_siginfo_from_user32 (siginfo_t *to, compat_siginfo_t __user *from);/* In a deft move of uber-hackery, we decide to carry the top half of all * 64-bit registers in a non-portable, non-ABI, hidden structure. * Userspace can read the hidden structure if it *wants* but is never -* guaranteed to be in the same place. Infact the uc_sigmask from the +* guaranteed to be in the same place. In fact the uc_sigmask from the * ucontext_t structure may push the hidden register file downards */ struct
compat_regfile{arch/parisc/kernel/smp.c +3
-3@@ -8,7 +8,7 @@ ** Lots of stuff stolen from arch/alpha/kernel/smp.c ** ...and then parisc stole from arch/ia64/kernel/smp.c. Thanks David! :^) ** -** Thanks to John Curry and Ullas Ponnadi. I learned alot from their work. +** Thanks to John Curry and Ullas Ponnadi. I learned a lot from their work. ** -grant (1/12/2001) ** ** This program is free software; you can redistribute it and/or modify@@ -419,7 +419,7 @@ smp_cpu_init(int cpunum)BUG ();enter_lazy_tlb (&init_mm, current); -init_IRQ ();/* make sure no IRQ's are enabled or pending */ +init_IRQ ();/* make sure no IRQs are enabled or pending */ start_cpu_itimer (); }@@ -552,7 +552,7 @@ void __devinit smp_prepare_boot_cpu(void)/* ** inventory.c:do_inventory() hasn't yet been run and thus we -** don't 'discover' the additional CPU's until later. +** don't 'discover' the additional CPUs until later. */ void __init smp_prepare_cpus (unsigned int max_cpus) {arch/parisc/kernel/time.c +1
-1@@ -191,7 +191,7 @@ int update_cr16_clocksource(void) {int change =0 ; -/* since the cr16 cycle counters are not syncronized across CPUs, +/* since the cr16 cycle counters are not synchronized across CPUs, we'll check if we should switch to a safe clocksource: */ if (clocksource_cr16.rating !=0 &&num_online_cpus () >1 ) {clocksource_change_rating (&clocksource_cr16,0 );arch/parisc/kernel/traps.c +1
-1@@ -615,7 +615,7 @@ void handle_interruption(int code, struct pt_regs *regs)case 13 :/* Conditional Trap -The condition succees in an instruction which traps +The condition succeeds in an instruction which traps on condition */ if (user_mode (regs)){ si.si_signo =SIGFPE ;arch/parisc/math-emu/dbl_float.h +2
-2@@ -22,7 +22,7 @@ PA header file -- do not include this header file for non-PA builds.#endif -/* 32-bit word grabing functions */ +/* 32-bit word grabbing functions */ #define Dbl_firstword (value) Dallp1(value)#define Dbl_secondword (value) Dallp2(value)#define Dbl_thirdword (value) dummy_location@@ -37,7 +37,7 @@#define Dbl_allp1 (object) Dallp1(object)#define Dbl_allp2 (object) Dallp2(object) -/* dbl_and_signs ands the sign bits of each argument and puts the result +/* dbl_and_signs ANDs the sign bits of each argument and puts the result * into the first argument. dbl_or_signs ors those same sign bits */ #define Dbl_and_signs ( src1dst, src2) \ Dallp1(src1dst) = (Dallp1(src2)|~((unsigned int)1<<31)) &Dallp1(src1dst)arch/parisc/math-emu/dfsqrt.c +1
-1@@ -76,7 +76,7 @@ dbl_fsqrt( }/* * Return quiet NaN or positive infinity. -* Fall thru to negative test if negative infinity. +* Fall through to negative test if negative infinity. */ if (Dbl_iszero_sign (srcp1) ||Dbl_isnotzero_mantissa (srcp1,srcp2)) {arch/parisc/math-emu/sfsqrt.c +1
-1@@ -76,7 +76,7 @@ sgl_fsqrt( }/* * Return quiet NaN or positive infinity. -* Fall thru to negative test if negative infinity. +* Fall through to negative test if negative infinity. */ if (Sgl_iszero_sign (src) ||Sgl_isnotzero_mantissa (src)) { *dstptr = src;arch/parisc/math-emu/sgl_float.h +2
-2@@ -23,7 +23,7 @@ PA header file -- do not include this header file for non-PA builds.#endif -/* 32-bit word grabing functions */ +/* 32-bit word grabbing functions */ #define Sgl_firstword (value) Sall(value)#define Sgl_secondword (value) dummy_location#define Sgl_thirdword (value) dummy_location@@ -36,7 +36,7 @@#define Sgl_exponentmantissa (object) Sexponentmantissa(object)#define Sgl_all (object) Sall(object) -/* sgl_and_signs ands the sign bits of each argument and puts the result +/* sgl_and_signs ANDs the sign bits of each argument and puts the result * into the first argument. sgl_or_signs ors those same sign bits */ #define Sgl_and_signs ( src1dst, src2) \ Sall(src1dst) = (Sall(src2)|~((unsigned int)1<<31)) & Sall(src1dst)arch/parisc/mm/init.c +5
-5@@ -890,7 +890,7 @@ void __init paging_init(void)#ifdef CONFIG_PA20 /* -* Currently, all PA20 chips have 18 bit protection id's, which is the +* Currently, all PA20 chips have 18 bit protection IDs, which is the * limiting factor (space ids are 32 bits). */ @@ -899,10 +899,10 @@ void __init paging_init(void)#else /* -* Currently we have a one-to-one relationship between space id's and -* protection id's. Older parisc chips (PCXS, PCXT, PCXL, PCXL2) only -* support 15 bit protection id's, so that is the limiting factor. -* PCXT' has 18 bit protection id's, but only 16 bit spaceids, so it's +* Currently we have a one-to-one relationship between space IDs and +* protection IDs. Older parisc chips (PCXS, PCXT, PCXL, PCXL2) only +* support 15 bit protection IDs, so that is the limiting factor. +* PCXT' has 18 bit protection IDs, but only 16 bit spaceids, so it's * probably not worth the effort for a special case here. */ Signature · 8 lines
1.5.0.1 -- Simon Arlott _______________________________________________ parisc-linux mailing list [email protected] http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
Quoted 3 lines · Simon Arlott
Spelling fixes in
arch/parisc/.Signed-off-by Simon Arlott <[email protected]>
thanks!
grant
Quoted 330 lines
---
arch/parisc/kernel/firmware.c | 4 ++-- arch/parisc/kernel/perf.c | 12 ++++++------ arch/parisc/kernel/processor.c | 8 ++++---- arch/parisc/kernel/setup.c | 2 +- arch/parisc/kernel/signal32.h | 2 +- arch/parisc/kernel/smp.c | 6 +++--- arch/parisc/kernel/time.c | 2 +- arch/parisc/kernel/traps.c | 2 +- arch/parisc/math-emu/dbl_float.h | 4 ++-- arch/parisc/math-emu/dfsqrt.c | 2 +- arch/parisc/math-emu/sfsqrt.c | 2 +- arch/parisc/math-emu/sgl_float.h | 4 ++-- arch/parisc/mm/init.c | 10 +++++----- 13 files changed, 30 insertions(+), 30 deletions(-)arch/parisc/kernel/firmware.c +2
-2@@ -634,7 +634,7 @@ EXPORT_SYMBOL(pdc_lan_station_id);* pdc_stable_read - Read data from Stable Storage. * @staddr: Stable Storage address to access. * @memaddr: The memory address where Stable Storage data shall be copied. -* @count: number of bytes to transfert. count is multiple of 4. +* @count: number of bytes to transfer. count is multiple of 4. * * This PDC call reads from the Stable Storage address supplied in staddr * and copies count bytes to the memory address memaddr. @@ -660,7 +660,7 @@ EXPORT_SYMBOL(pdc_stable_read);* pdc_stable_write - Write data to Stable Storage. * @staddr: Stable Storage address to access. * @memaddr: The memory address where Stable Storage data shall be read from. -* @count: number of bytes to transfert. count is multiple of 4. +* @count: number of bytes to transfer. count is multiple of 4. * * This PDC call reads count bytes from the supplied memaddr address, * and copies count bytes to the Stable Storage address staddr.
arch/parisc/kernel/perf.c +6
-6@@ -171,7 +171,7 @@ static const uint64_t perf_bitmasks[] = {/* * Write control bitmasks for Pa-8700 processor given -* somethings have changed slightly. +* some things have changed slightly. */ static const uint64_t perf_bitmasks_piranha[] = {0x0000000000000000ul ,/* first dbl word must be zero */ @@ -574,27 +574,27 @@ static int perf_stop_counters(uint32_t *raddr)if (!perf_rdr_read_ubuf (16 , userbuf))return -13 ; -/* Counter0 is bits 1398 thru 1429 */ +/* Counter0 is bits 1398 to 1429 */ tmp64 = (userbuf[21 ] <<22 ) &0x00000000ffc00000 ; tmp64 |= (userbuf[22 ] >>42 ) &0x00000000003fffff ;/* OR sticky0 (bit 1430) to counter0 bit 32 */ tmp64 |= (userbuf[22 ] >>10 ) &0x0000000080000000 ; raddr[0 ] = (uint32_t )tmp64; -/* Counter1 is bits 1431 thru 1462 */ +/* Counter1 is bits 1431 to 1462 */ tmp64 = (userbuf[22 ] >>9 ) &0x00000000ffffffff ;/* OR sticky1 (bit 1463) to counter1 bit 32 */ tmp64 |= (userbuf[22 ] <<23 ) &0x0000000080000000 ; raddr[1 ] = (uint32_t )tmp64; -/* Counter2 is bits 1464 thru 1495 */ +/* Counter2 is bits 1464 to 1495 */ tmp64 = (userbuf[22 ] <<24 ) &0x00000000ff000000 ; tmp64 |= (userbuf[23 ] >>40 ) &0x0000000000ffffff ;/* OR sticky2 (bit 1496) to counter2 bit 32 */ tmp64 |= (userbuf[23 ] >>8 ) &0x0000000080000000 ; raddr[2 ] = (uint32_t )tmp64; -/* Counter3 is bits 1497 thru 1528 */ +/* Counter3 is bits 1497 to 1528 */ tmp64 = (userbuf[23 ] >>7 ) &0x00000000ffffffff ;/* OR sticky3 (bit 1529) to counter3 bit 32 */ tmp64 |= (userbuf[23 ] <<25 ) &0x0000000080000000 ;@@ -616,7 +616,7 @@ static int perf_stop_counters(uint32_t *raddr) userbuf[23 ] =0 ;/* -* Write back the zero'ed bytes + the image given +* Write back the zeroed bytes + the image given * the read was destructive. */ perf_rdr_write (16 , userbuf);arch/parisc/kernel/processor.c +0
-0@@ -63,7 +63,7 @@ extern int update_cr16_clocksource(void); /* from
time.c*/
** will callregister_parisc_driver(&cpu_driver)before callingdo_inventory().
**
** The goal of consolidating CPU initialization into one place isarch/parisc/kernel/processor.c +1
-1-** to make sure all CPU's get initialized the same way. +** to make sure all CPUs get initialized the same way.** The code path not shared is how PDC hands control of the CPU to the OS. ** The initialization of OS data structures is the same (done below). */
arch/parisc/kernel/processor.c +1
-1@@ -166,7 +166,7 @@ static int __init processor_probe(struct parisc_device *dev)#endif /* -** CONFIG_SMP: init_smp_config() will attempt to get CPU's into +** CONFIG_SMP: init_smp_config() will attempt to get CPUs into ** OS control. RENDEZVOUS is the default state - see mem_set above. ** p->state = STATE_RENDEZVOUS; */arch/parisc/kernel/processor.c +1
-1@@ -334,7 +334,7 @@ int __init init_per_cpu(int cpunum) }/* -* Display cpu info for all cpu's. +* Display CPU info for all CPUs. */ int
show_cpuinfo(structseq_file*m, void *v)arch/parisc/kernel/processor.c +1
-1@@ -393,7 +393,7 @@ static struct parisc_driver cpu_driver __read_mostly = { };/** -* processor_init - Processor initalization procedure. +* processor_init - Processor initialization procedure. * * Register this driver. */ arch/parisc/kernel/setup.c +1
-1@@ -162,7 +162,7 @@ void __init setup_arch(char **cmdline_p) }/* -* Display cpu info for all cpu's. +* Display CPU info for all CPUs. * for parisc this is in processor.c */ extern int show_cpuinfo (struct seq_file *m,void *v);arch/parisc/kernel/signal32.h +1
-1@@ -113,7 +113,7 @@ int copy_siginfo_from_user32 (siginfo_t *to, compat_siginfo_t __user *from);/* In a deft move of uber-hackery, we decide to carry the top half of all * 64-bit registers in a non-portable, non-ABI, hidden structure. * Userspace can read the hidden structure if it *wants* but is never -* guaranteed to be in the same place. Infact the uc_sigmask from the +* guaranteed to be in the same place. In fact the uc_sigmask from the * ucontext_t structure may push the hidden register file downards */ struct
compat_regfile{arch/parisc/kernel/smp.c +3
-3@@ -8,7 +8,7 @@ ** Lots of stuff stolen from arch/alpha/kernel/smp.c ** ...and then parisc stole from arch/ia64/kernel/smp.c. Thanks David! :^) ** -** Thanks to John Curry and Ullas Ponnadi. I learned alot from their work. +** Thanks to John Curry and Ullas Ponnadi. I learned a lot from their work. ** -grant (1/12/2001) ** ** This program is free software; you can redistribute it and/or modify@@ -419,7 +419,7 @@ smp_cpu_init(int cpunum)BUG ();enter_lazy_tlb (&init_mm, current); -init_IRQ ();/* make sure no IRQ's are enabled or pending */ +init_IRQ ();/* make sure no IRQs are enabled or pending */ start_cpu_itimer (); }@@ -552,7 +552,7 @@ void __devinit smp_prepare_boot_cpu(void)/* ** inventory.c:do_inventory() hasn't yet been run and thus we -** don't 'discover' the additional CPU's until later. +** don't 'discover' the additional CPUs until later. */ void __init smp_prepare_cpus (unsigned int max_cpus) {arch/parisc/kernel/time.c +1
-1@@ -191,7 +191,7 @@ int update_cr16_clocksource(void) {int change =0 ; -/* since the cr16 cycle counters are not syncronized across CPUs, +/* since the cr16 cycle counters are not synchronized across CPUs, we'll check if we should switch to a safe clocksource: */ if (clocksource_cr16.rating !=0 &&num_online_cpus () >1 ) {clocksource_change_rating (&clocksource_cr16,0 );arch/parisc/kernel/traps.c +1
-1@@ -615,7 +615,7 @@ void handle_interruption(int code, struct pt_regs *regs)case 13 :/* Conditional Trap -The condition succees in an instruction which traps +The condition succeeds in an instruction which traps on condition */ if (user_mode (regs)){ si.si_signo =SIGFPE ;arch/parisc/math-emu/dbl_float.h +2
-2@@ -22,7 +22,7 @@ PA header file -- do not include this header file for non-PA builds.#endif -/* 32-bit word grabing functions */ +/* 32-bit word grabbing functions */ #define Dbl_firstword (value) Dallp1(value)#define Dbl_secondword (value) Dallp2(value)#define Dbl_thirdword (value) dummy_location@@ -37,7 +37,7 @@#define Dbl_allp1 (object) Dallp1(object)#define Dbl_allp2 (object) Dallp2(object) -/* dbl_and_signs ands the sign bits of each argument and puts the result +/* dbl_and_signs ANDs the sign bits of each argument and puts the result * into the first argument. dbl_or_signs ors those same sign bits */ #define Dbl_and_signs ( src1dst, src2) \ Dallp1(src1dst) = (Dallp1(src2)|~((unsigned int)1<<31)) &Dallp1(src1dst)arch/parisc/math-emu/dfsqrt.c +1
-1@@ -76,7 +76,7 @@ dbl_fsqrt( }/* * Return quiet NaN or positive infinity. -* Fall thru to negative test if negative infinity. +* Fall through to negative test if negative infinity. */ if (Dbl_iszero_sign (srcp1) ||Dbl_isnotzero_mantissa (srcp1,srcp2)) {arch/parisc/math-emu/sfsqrt.c +1
-1@@ -76,7 +76,7 @@ sgl_fsqrt( }/* * Return quiet NaN or positive infinity. -* Fall thru to negative test if negative infinity. +* Fall through to negative test if negative infinity. */ if (Sgl_iszero_sign (src) ||Sgl_isnotzero_mantissa (src)) { *dstptr = src;arch/parisc/math-emu/sgl_float.h +2
-2@@ -23,7 +23,7 @@ PA header file -- do not include this header file for non-PA builds.#endif -/* 32-bit word grabing functions */ +/* 32-bit word grabbing functions */ #define Sgl_firstword (value) Sall(value)#define Sgl_secondword (value) dummy_location#define Sgl_thirdword (value) dummy_location@@ -36,7 +36,7 @@#define Sgl_exponentmantissa (object) Sexponentmantissa(object)#define Sgl_all (object) Sall(object) -/* sgl_and_signs ands the sign bits of each argument and puts the result +/* sgl_and_signs ANDs the sign bits of each argument and puts the result * into the first argument. sgl_or_signs ors those same sign bits */ #define Sgl_and_signs ( src1dst, src2) \ Sall(src1dst) = (Sall(src2)|~((unsigned int)1<<31)) & Sall(src1dst)arch/parisc/mm/init.c +5
-5@@ -890,7 +890,7 @@ void __init paging_init(void)#ifdef CONFIG_PA20 /* -* Currently, all PA20 chips have 18 bit protection id's, which is the +* Currently, all PA20 chips have 18 bit protection IDs, which is the * limiting factor (space ids are 32 bits). */ @@ -899,10 +899,10 @@ void __init paging_init(void)#else /* -* Currently we have a one-to-one relationship between space id's and -* protection id's. Older parisc chips (PCXS, PCXT, PCXL, PCXL2) only -* support 15 bit protection id's, so that is the limiting factor. -* PCXT' has 18 bit protection id's, but only 16 bit spaceids, so it's +* Currently we have a one-to-one relationship between space IDs and +* protection IDs. Older parisc chips (PCXS, PCXT, PCXL, PCXL2) only +* support 15 bit protection IDs, so that is the limiting factor. +* PCXT' has 18 bit protection IDs, but only 16 bit spaceids, so it's * probably not worth the effort for a special case here. */ Signature · 8 lines
1.5.0.1 -- Simon Arlott _______________________________________________ parisc-linux mailing list [email protected] http://lists.parisc-linux.org/mailman/listinfo/parisc-linux