spelling fixes: arch/v850/

Spelling fixes in arch/v850/.

---

arch/v850/kernel/me2.c          |    4 ++--
arch/v850/kernel/rte_mb_a_pci.c |    4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)

index 38be5c1..007115d 100644
@@ -58,13 +58,13 @@ void __init me2_init_irqs (void)

void me2_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)

{
	if (chan == 0) {
-		/* Specify that the relevent pins on the chip should do
+		/* Specify that the relevant pins on the chip should do
		   serial I/O, not direct I/O.  */
		ME2_PORT1_PMC |= 0xC;
		/* Specify that we're using the UART, not the CSI device. */
		ME2_PORT1_PFC |= 0xC;
	} else if (chan == 1) {
-		/* Specify that the relevent pins on the chip should do
+		/* Specify that the relevant pins on the chip should do
		   serial I/O, not direct I/O.  */
		ME2_PORT2_PMC |= 0x6;
		/* Specify that we're using the UART, not the CSI device. */

index 35a4bd5..7165478 100644
@@ -179,7 +179,7 @@ static int __devinit pcibios_init (void)

		   default uses.  */

		/* Significant address bits used for decoding PCI GCS5 space
-		   accessess.  */
+		   accesses.  */
		MB_A_PCI_DMRR = ~(MB_A_PCI_MEM_SIZE - 1);

		/* I don't understand this, but the SolutionGear example code

@@ -775,7 +775,7 @@ pci_alloc_consistent (struct pci_dev *pdev, size_t size, dma_addr_t *dma_addr) /* Free and unmap a consistent DMA buffer. CPU_ADDR and DMA_ADDR must
be values that were returned from pci_alloc_consistent. SIZE must be
the same as what as passed into pci_alloc_consistent. References to
- the memory and mappings assosciated with CPU_ADDR or DMA_ADDR past
+ the memory and mappings associated with CPU_ADDR or DMA_ADDR past
this call are illegal. */
void
pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr,

1.5.0.1

-- 
Simon Arlott