Revive Dead Dongle
Hey, =
I tried upgrading the Firmware of my CSR-based D-Link DBT-120 B3. Unfortunately, the upgrade seems to have failed: The D-Link's light don't light up anymore and no USB-device is detected when plugging in the device.
Is there a known way to force the Dongle to boot into DFU-Mode? Or is it hopelessly flashed to death?
Thanks, =
greetings, =
andy
-- =
Andreas B=F6hler
andy (dot) boehler (at) gmx (dot) at
http://klasseonline.dyndns.org
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Quoted 4 lines · Andreas B=F6hler wrote:
Hey, =
=
Quoted 8 lines
I tried upgrading the Firmware of my CSR-based D-Link DBT-120 B3. Unfortunately, the upgrade seems to have failed: The D-Link's light don't light up anymore and no USB-device is detected when plugging in the device.
=Is there a known way to force the Dongle to boot into DFU-Mode? Or is it hopelessly flashed to death?
if it has spi you might be able to reflash. but i never tried that.
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Quoted 9 lines · Martin Karger
Quoted 8 lines · Andreas B=F6hler wrote:
Hey, =
I tried upgrading the Firmware of my CSR-based D-Link DBT-120 B3. Unfortunately, the upgrade seems to have failed: The D-Link's light don't light up anymore and no USB-device is detected when plugging in the device.
Quoted 5 lines
Quoted 2 lines
Is there a known way to force the Dongle to boot into DFU-Mode? Or is it hopelessly flashed to death?
=
if it has spi you might be able to reflash. but i never tried that.
short article on debricking you bt-dongle via spi:
http://www.evilgenius.de/2007/06/11/de-bricking-your-bluetooth-dongle/
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel
Quoted 9 lines · Martin Karger
Quoted 8 lines · Andreas B=F6hler wrote:
Hey, =
I tried upgrading the Firmware of my CSR-based D-Link DBT-120 B3. Unfortunately, the upgrade seems to have failed: The D-Link's light don't light up anymore and no USB-device is detected when plugging in the device.
Quoted 5 lines
Quoted 2 lines
Is there a known way to force the Dongle to boot into DFU-Mode? Or is it hopelessly flashed to death?
=
if it has spi you might be able to reflash. but i never tried that.
short article on debricking you bt-dongle via spi:
http://www.evilgenius.de/2007/06/11/de-bricking-your-bluetooth-dongle/
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel