virtual domain support
'allo,
I came across mlmmj while searching for something that would replace my
current mailman installation. I use Postfix as my MTA and have several virtual domains for which Postfix is the MTA. With my current setup, I have mailing lists spread out over the virtual domains, and things work just fine.
How does mlmmj work with virtual domains ? Is there a document that
someone can point me to that has guidelines for it ?
cheers,
mehul
Signature · 2 lines
Mehul N. Sanghvi email: [email protected]
Quoted 2 lines · Mehul N. Sanghvi
How does mlmmj work with virtual domains ? Is there a document
that someone can point me to that has guidelines for it ?
It's actually quite simple. In your virtual file you make an entry for each list like this:
[email protected] mlmmj-virtualdomain.example.com-listname
And then, also for each list, make an entry in your aliases file like this:
mlmmj-virtualdomain.example.com-listname: "/usr/local/bin/mlmmj-recieve -L /var/spool/mlmmj/virtualdomain.example.com/listname"
Of course you can choose your directory layout and alias names any way you like, but this should give you the general idea.
Signature · 1 line
Christian Laursen
Christian Laursen said the following on 5/18/2007 10:07 AM:
Quoted 11 lines
Quoted 2 lines · Mehul N. Sanghvi
How does mlmmj work with virtual domains ? Is there a document
that someone can point me to that has guidelines for it ?It's actually quite simple. In your virtual file you make an entry for each list like this:
[email protected] mlmmj-virtualdomain.example.com-listname
Quoted 8 lines
And then, also for each list, make an entry in your aliases file like this:
mlmmj-virtualdomain.example.com-listname: "
/usr/local/bin/mlmmj-recieve-L/var/spool/mlmmj/virtualdomain.example.com/listname"Of course you can choose your directory layout and alias names any way you like, but this should give you the general idea.
I have the following setup:
---- /etc/postfix/virtual ----
# mlmmj mailing lists [email protected] mlmmj-test
---- /etc/postfix/virtual ----
---- /etc/aliases ----
mlmmj-test: "|/usr/bin/mlmmj-recieve -L /var/spool/mlmmj/mlmmj-test/"
---- /etc/aliases ----
In trying to send a message to the list I get the following entries in the /var/log/mail.log file:
May 30 23:54:51 REAL_HOST postfix/pickup[17476]: 1E1AD51BB7: uid00 from=<[email protected]> May 30 23:54:51 REAL_HOST postfix/cleanup[17674]: 1E1AD51BB7: message-id=<[email protected]> May 30 23:54:51 REAL_HOST postfix/qmgr[2870]: 1E1AD51BB7: from=<[email protected]>, sizeT6, nrcpt=1 (queue active) May 30 23:54:51 REAL_HOST postfix/smtpd[17679]: connect from localhost.localdomain[127.0.0.1] May 30 23:54:51 REAL_HOST postfix/smtpd[17679]: NOQUEUE: reject: RCPT from localhost.localdomain[127.0.0.1]: 504 5.5.2 <REAL_HOST>: Helo command rejected: need fully-qualified hostname; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<REAL_HOST> May 30 23:54:51 REAL_HOST /usr/bin/mlmmj-send[17678]: mlmmj-send.c:241: Error in RCPT TO. Reply = [504 5.5.2 <REAL_HOST>: Helo command rejected: need fully-qualified hostname^M ]: Success May 30 23:54:51 REAL_HOST postfix/smtpd[17679]: disconnect from localhost.localdomain[127.0.0.1] May 30 23:54:51 REAL_HOST postfix/local[17676]: 1E1AD51BB7: to=<[email protected]>, orig_to=<[email protected]>, relay=local, delay=0.34, delays=0.09/0.03/0/0.23, dsn=2.0.0, status=sent (delivered to command: /usr/bin/mlmmj-recieve -L /var/spool/mlmmj/mlmmj-test/) May 30 23:54:51 REAL_HOST postfix/qmgr[2870]: 1E1AD51BB7: removed
Why is getting rejected ? I would like mlmmj to use the VHOST.TLD in the HELO rather then the REAL_HOST, is that possible ? How so ?
cheers,
mehul
Signature · 2 lines
Mehul N. Sanghvi email: [email protected]
Hi Mehul,
Quoted 2 lines · Mehul N. Sanghvi
In trying to send a message to the list I get the following entries in the
/var/log/mail.logfile:
[snip]
Quoted 5 lines
May 30 23:54:51 REAL_HOST postfix/smtpd[17679]: NOQUEUE: reject: RCPT fromlocalhost.localdomain[127.0.0.1]: 504 5.5.2 <
REAL_HOST>: Helo command rejected:
need fully-qualified hostname; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<REAL_HOST>
[snip]
Quoted 1 line
Why is getting rejected ?
Because your host does not know its own FQHN.
Quoted 2 lines
I would like mlmmj to use the VHOST.TLD in the HELO rather then the
REAL_HOST, is that possible ?
No, that is not possible.
Mlmmj asks the operating system - via gethostname() - what its hostname is. Then it does a lookup - via gethostbyname() - to get the host's FQHN.
How does your /etc/hosts look?
Morten
Signature · 2 lines
Morten K. Poulsen <[email protected]> http://www.afdelingp.dk/
Morten K. Poulsen said the following on 5/31/2007 1:09 PM:
Quoted 11 lines
Hi Mehul,
Quoted 2 lines · Mehul N. Sanghvi
In trying to send a message to the list I get the following entries in the
/var/log/mail.logfile:[snip]
Quoted 5 lines
May 30 23:54:51 REAL_HOST postfix/smtpd[17679]: NOQUEUE: reject: RCPT fromlocalhost.localdomain[127.0.0.1]: 504 5.5.2 <
REAL_HOST>: Helo command rejected:
need fully-qualified hostname; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<REAL_HOST>
Quoted 5 lines
[snip]
Quoted 1 line
Why is getting rejected ?
Because your host does not know its own FQHN.
I wonder how mailman does things then, because my mailing lists work fine in Mailman on the same system. But Mailman is overkill for what I want to do
Quoted 9 lines
Quoted 2 lines
I would like mlmmj to use the VHOST.TLD in the HELO rather then the
REAL_HOST, is that possible ?No, that is not possible.
Mlmmj asks the operating system - via
gethostname()- what its hostname is. Then it does a lookup - viagethostbyname()- to get the host's FQHN.How does your
/etc/hostslook?
127.0.0.1 localhost localhost.localdomain
192.168.x.x REAL_HOST
cheers,
mehul
Signature · 2 lines
Mehul N. Sanghvi email: [email protected]
Hi Mehul,
Quoted 6 lines · Mehul N. Sanghvi
Morten K. Poulsen said the following on 5/31/2007 1:09 PM:
Quoted 3 lines
Quoted 1 line
Why is getting rejected ?
Because your host does not know its own FQHN.
I wonder how mailman does things then
What does MailMan use as the domain in the HELO line?
Quoted 5 lines
Quoted 1 line
How does your
/etc/hostslook?127.0.0.1 localhost localhost.localdomain
192.168.x.x
REAL_HOST
This makes it difficult to diagnose your problems. Is "REAL_HOST" a short host name or is it fully qualified? I can't see that. If you wish to "anonymize" your /etc/hosts, please pretend that the host is in the .example or .example.com domain.
Morten
Signature · 2 lines
Morten K. Poulsen <[email protected]> http://www.afdelingp.dk/