no DRQ after issuing MULTWRITE_EXT AND PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0a) (try 'pci=assign-busses')
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 10 lines · Tjenarvi Tjenarvi
These dmesg if not as Tejun said, Which he said should only libata drivers used to get more information. Frankly, I don't know which one I have to take off in kernel configuration to comply this. I guess the libata is in:
Device Drivers --->
SCSI device support --->But, don't know which one to take off, so that only libata driver compiled. Please tell me.
Please turn off Device Drivers -> ATA/ATAPi/MFM/RLL support. I'm not sure which ide driver is grabbing the first port. Can you post the original .config?
Quoted 6 lines
The machine seems nothing wrong whether I used "pci=assign-busses" or not. But, I found another message that I don't understand in the dmesg whether I use "pci=assign-busses" or not, the message still occur, I don't know this is related or not. The message is "PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report". Should I try this kernel option?
I don't think you need to pay attention to the message.
Signature · 1 line
tejun