Skip to contentSkip to conversation

no DRQ after issuing MULTWRITE_EXT AND PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0a) (try 'pci=assign-busses')

DISCUSSION Tejun Heo 1 participant 1 message May 20, 2007 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Tejun Heo

author
#1 lore raw
Quoted 17 lines · Tjenarvi Tjenarvi

When WITHOUT ATA/ATAPi/MFM/RLL support, but I couldn't boot it, I got kernel panic. Here is the last 10 lines messages:

VFS : Mounted root (ext2 filesystem)
No kernel modules found for Linux.2.6.22-rc1
VFS: Cannot open root device "301" or unknown-block (3,1) Please append a correct "root=" boot option; here are the available partitions:
0800 117220824 sda1
0801 34178256 sda2
0802 1 sda3

  0803      43720897  sda5
  0806      39062016  sda6

0b00 1048575 sr0 driver : sr
kernel panic - not syncing : VFS : Unable to mount root fs on unknown-block(3,1)

Quoted 6 lines

1. My .config with ATA/ATAPi/MFM/RLL support in
http://www.mydatabus.com/public/Tje/config
2. My .config WITHOUT ATA/ATAPi/MFM/RLL support in
http://www.mydatabus.com/public/Tje/config2

Why I got kernel panic, it is should work only libata drivers. Thx.

Because your harddrive changed from /dev/hda to /dev/sda. You need to update the root= kernel parameter.

Signature · 1 line
tejun