Add IT8726F
Subsystems (3)
PATCH 1/1 Add IT8726F
Hello,
Following patch adds support for IT8726F chip driver, which is just same as IT8716F with additional glue logic for AMD power sequencing.
Signed-off-by Rudolf Marek <[email protected]>
Please apply. Compile tested.
Rudolf
Documentation/hwmon/it87 +7 -2
@@ -12,11 +12,12 @@ Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Publicly available at the ITE website http://www.ite.com.tw/ - * IT8716F + * IT8716F/IT8726F Prefix: 'it8716' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Publicly available at the ITE website http://www.ite.com.tw/product_info/file/pc/IT8716F_V0.3.ZIP + http://www.ite.com.tw/product_info/file/pc/IT8726F_V0.3.pdf * IT8718F Prefix: 'it8718' Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -68,7 +69,7 @@ ----------- This driver implements support for the IT8705F, IT8712F, IT8716F, -IT8718F and SiS950 chips. +IT8718F, IT8726F and SiS950 chips. These chips are 'Super I/O chips', supporting floppy disks, infrared ports, joysticks and other miscellaneous stuff. For hardware monitoring, they
@@ -97,6 +98,10 @@ revisions. For now, the driver only uses the 16-bit mode on the IT8716F and IT8718F. +The IT8726F is just bit enhanced IT8716F with additional hardware +for AMD power sequencing. Therefore the chip will appear as IT8716F +to userspace applications. + Temperatures are measured in degrees Celsius. An alarm is triggered once when the Overtemperature Shutdown limit is crossed.
drivers/hwmon/it87.c +6 -1
@@ -6,6 +6,7 @@ IT8712F Super I/O chip w/LPC interface IT8716F Super I/O chip w/LPC interface IT8718F Super I/O chip w/LPC interface + IT8726F Super I/O chip w/LPC interface Sis950 A clone of the IT8705F Copyright (C) 2001 Chris Gauthron <[email protected]>
@@ -97,6 +98,7 @@#define IT8705F_DEVID 0x8705#define IT8716F_DEVID 0x8716#define IT8718F_DEVID 0x8718 +#define IT8726F_DEVID 0x8726#define IT87_ACT_REG 0x30#define IT87_BASE_REG 0x60
@@ -885,6 +887,7 @@ chip_type =superio_inw (DEVID );if (chip_type !=IT8712F_DEVID && chip_type !=IT8716F_DEVID + && chip_type !=IT8726F_DEVID && chip_type !=IT8718F_DEVID && chip_type !=IT8705F_DEVID ) goto exit;
@@ -965,6 +968,8 @@ data->type = it8712; name ="it8712" ;break ; +case IT8726F_DEVID : +/* fall through */ case IT8716F_DEVID : data->type = it8716; name ="it8716" ;
@@ -1389,7 +1394,7 @@MODULE_AUTHOR ("Chris Gauthron <[email protected]>, " "Jean Delvare <[email protected]>" ); -MODULE_DESCRIPTION ("IT8705F/8712F/8716F/8718F, SiS950 driver" ); +MODULE_DESCRIPTION ("IT8705F/8712F/8716F/8718F/8726F, SiS950 driver" );module_param (update_vbat, bool,0 );MODULE_PARM_DESC (update_vbat,"Update vbat if set else return powerup value" );module_param (fix_pwm_polarity, bool,0 );
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Hi Rudolf,
Quoted 6 lines · Rudolf Marek
Following patch adds support for IT8726F chip driver, which is just same as IT8716F with additional glue logic for AMD power sequencing.
Signed-off-by Rudolf Marek <[email protected]>Please apply. Compile tested.
Patch applied, thanks. I added a minor change to drivers/hwmon/Kconfig to list the IT8726F there.
Signature · 6 lines
Jean Delvare _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors