Skip to contentSkip to conversation

Minor spelling fixes

PATCH In review Stefan Weil 1 participant 2 messages May 14, 2006 – Jun 2, 2007

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Minor spelling fixes

Here is a collection of some minor patches.
They only fix spelling in comments.

Regards
Stefan

Index: cpu-exec.c
===================================================================
RCS file: /sources/qemu/qemu/cpu-exec.c,v
retrieving revision 1.78

cpu-exec.c 14 May 2006 10:42:48 -0000 renamed from cpu-exec.c 27 Apr 2006 21:05:14 -0000 1.78 +1 -1
diff -u -b -B -u -r1.78 cpu-exec.c
@@ -386,7 +386,7 @@
                    break;
                } else if (env->user_mode_only) {
                    /* if user mode only, we simulate a fake exception
-                       which will be hanlded outside the cpu execution
+                       which will be handled outside the cpu execution
                       loop */
#if defined(TARGET_I386)
                    do_interrupt_user(env->exception_index,

Index: hw/ne2000.c
===================================================================
RCS file: /sources/qemu/qemu/hw/ne2000.c,v
retrieving revision 1.19

ne2000.c 14 May 2006 10:42:54 -0000 renamed from ne2000.c 4 Feb 2006 22:15:28 -0000 1.19 +1 -1
diff -u -b -B -u -r1.19 ne2000.c
@@ -312,7 +312,7 @@
    }
    s->curpag = next >> 8;
 
-    /* now we can signal we have receive something */
+    /* now we can signal we have received something */
    s->isr |= ENISR_RX;
    ne2000_update_irq(s);

}
Index: hw/smc91c111.c
===================================================================
RCS file: /sources/qemu/qemu/hw/smc91c111.c,v
retrieving revision 1.3

smc91c111.c 14 May 2006 10:42:55 -0000 renamed from smc91c111.c 4 Feb 2006 22:15:28 -0000 1.3 +1 -1
diff -u -b -B -u -r1.3 smc91c111.c
@@ -615,7 +615,7 @@
 
    if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST))
        return;
-    /* Short packets are padded with zeros.  Recieveing a packet
+    /* Short packets are padded with zeros.  Receiving a packet
       < 64 bytes long is considered an error condition.  */
    if (size < 64)
        packetsize = 64;

Index: hw/unin_pci.c
===================================================================
RCS file: /sources/qemu/qemu/hw/unin_pci.c,v
retrieving revision 1.1

unin_pci.c 14 May 2006 10:42:55 -0000 renamed from unin_pci.c 13 May 2006 16:11:23 -0000 1.1 +1 -1
diff -u -b -B -u -r1.1 unin_pci.c
@@ -176,7 +176,7 @@
    d->config[0x0E] = 0x00; // header_type
    d->config[0x34] = 0x00; // capabilities_pointer
 
-#if 0 // XXX: not activated as PPC BIOS doesn't handle mutiple buses properly
+#if 0 // XXX: not activated as PPC BIOS doesn't handle multiple busses properly
    /* pci-to-pci bridge */
    d = pci_register_device("Uni-north bridge", sizeof(PCIDevice), 0, 

13 << 3,

                            NULL, NULL);

Index: target-mips/translate.c
===================================================================
RCS file: /sources/qemu/qemu/target-mips/translate.c,v retrieving revision 1.12

translate.c 14 May 2006 10:42:56 -0000 renamed from translate.c 23 Apr 2006 15:21:24 -0000 1.12 +0 -0
diff -u -b -B -u -r1.12 translate.c
@@ -173,7 +173,7 @@

};

enum {
- /* Mutiply & xxx operations */
+ /* Multiply & xxx operations */

    OPC_MADD     = 0x00 | EXT_SPECIAL2,
    OPC_MADDU    = 0x01 | EXT_SPECIAL2,
    OPC_MUL      = 0x02 | EXT_SPECIAL2,

Index: target-sh4/README.sh4
===================================================================
RCS file: /sources/qemu/qemu/target-sh4/README.sh4,v retrieving revision 1.1

README.sh4 14 May 2006 10:42:57 -0000 renamed from README.sh4 27 Apr 2006 21:32:09 -0000 1.1 +0 -0
diff -u -b -B -u -r1.1 README.sh4
@@ -113,7 +113,7 @@

Files
-----

-File names are harcoded at this time. The bootloader must be stored in +File names are hardcoded at this time. The bootloader must be stored in shix_bios.bin in the current directory. The initial Linux image must be stored in shix_linux_nand.bin in the current directory in NAND format. Test files can be obtained from

#1 lore raw

Here are some more spelling fixes and one fix for code formatting. Please add them to CVS.

Stefan

Quoted 5 lines · Stefan Weil

Here is a collection of some minor patches.
They only fix spelling in comments.

Regards
Stefan

Index: disas.c
===================================================================
RCS file: /sources/qemu/qemu/disas.c,v
retrieving revision 1.37

disas.c +1 -1
diff -u -b -B -r1.37 disas.c
@@ -134,7 +134,7 @@
 }
 #endif
 
-/* Disassemble this for me please... (debugging). 'flags' has teh following
+/* Disassemble this for me please... (debugging). 'flags' has the following
    values:
     i386 - nonzero means 16 bit code
     arm  - nonzero means thumb code 

Index: exec.c
===================================================================
RCS file: /sources/qemu/qemu/exec.c,v
retrieving revision 1.98

exec.c +1 -1
diff -u -b -B -r1.98 exec.c
@@ -1220,7 +1221,7 @@
     { CPU_LOG_EXEC, "exec",
       "show trace before each executed TB (lots of logs)" },
     { CPU_LOG_TB_CPU, "cpu",
-      "show CPU state before bloc translation" },
+      "show CPU state before block translation" },
 #ifdef TARGET_I386
     { CPU_LOG_PCALL, "pcall",
       "show protected mode far calls/returns/exceptions" },

Index: sdl.c
===================================================================
RCS file: /sources/qemu/qemu/sdl.c,v
retrieving revision 1.38

sdl.c +2 -1
diff -u -b -B -r1.38 sdl.c
@@ -407,7 +407,8 @@
                         case SDLK_END: keysym = QEMU_KEY_END; break;
                         case SDLK_PAGEUP: keysym = QEMU_KEY_PAGEUP; break;
                         case SDLK_PAGEDOWN: keysym = QEMU_KEY_PAGEDOWN; break;
-                        case SDLK_BACKSPACE: keysym = QEMU_KEY_BACKSPACE; break;                        case SDLK_DELETE: keysym = QEMU_KEY_DELETE; break;
+                        case SDLK_BACKSPACE: keysym = QEMU_KEY_BACKSPACE; break;
+                        case SDLK_DELETE: keysym = QEMU_KEY_DELETE; break;
                         default: break;
                         }
                     }

Index: darwin-user/mmap.c
===================================================================
RCS file: /sources/qemu/qemu/darwin-user/mmap.c,v
retrieving revision 1.1

mmap.c +1 -1
diff -u -b -B -r1.1 mmap.c
@@ -199,7 +199,7 @@
 
     if (!(flags & MAP_FIXED)) {
 #if defined(__alpha__) || defined(__sparc__) || defined(__x86_64__)
-        /* tell the kenel to search at the same place as i386 */
+        /* tell the kernel to search at the same place as i386 */
         if (host_start == 0) {
             host_start = last_start;
             last_start += HOST_PAGE_ALIGN(len);

Index: hw/cirrus_vga.c
===================================================================
RCS file: /sources/qemu/qemu/hw/cirrus_vga.c,v
retrieving revision 1.24

cirrus_vga.c +1 -1
diff -u -b -B -r1.24 cirrus_vga.c
@@ -2784,7 +2786,7 @@
 	case 0x09:
 	case 0x0c:
 	case 0x0d:
-	case 0x12:		/* veritcal display end */
+	case 0x12:		/* vertical display end */
 	    s->cr[s->cr_index] = val;
 	    break;
 

Index: hw/cuda.c
===================================================================
RCS file: /sources/qemu/qemu/hw/cuda.c,v
retrieving revision 1.12

cuda.c +2 -2
diff -u -b -B -r1.12 cuda.c
@@ -445,9 +445,9 @@
             cuda_update_irq(s);
         } else {
             if (!(s->last_b & TIP)) {
-                /* handle end of host to cuda transfert */
+                /* handle end of host to cuda transfer */
                 packet_received = (s->data_out_index > 0);
-                /* always an IRQ at the end of transfert */
+                /* always an IRQ at the end of transfer */
                 s->ifr |= SR_INT;
                 cuda_update_irq(s);
             }

Index: hw/ne2000.c
===================================================================
RCS file: /sources/qemu/qemu/hw/ne2000.c,v
retrieving revision 1.25

ne2000.c +3 -3
diff -u -b -B -r1.25 ne2000.c
@@ -325,7 +325,7 @@
         s->cmd = val;
         if (!(val & E8390_STOP)) { /* START bit makes no sense on RTL8029... */
             s->isr &= ~ENISR_RESET;
-            /* test specific case: zero length transfert */
+            /* test specific case: zero length transfer */
             if ((val & (E8390_RREAD | E8390_RWRITE)) &&
                 s->rcnt == 0) {
                 s->isr |= ENISR_RDC;
@@ -340,7 +340,7 @@
                 if (index + s->tcnt <= NE2000_PMEM_END) {
                     qemu_send_packet(s->vc, s->mem + index, s->tcnt);
                 }
-                /* signal end of transfert */
+                /* signal end of transfer */
                 s->tsr = ENTSR_PTX;
                 s->isr |= ENISR_TX;
                 s->cmd &= ~E8390_TRANS; 
@@ -550,7 +550,7 @@
 
     if (s->rcnt <= len) {
         s->rcnt = 0;
-        /* signal end of transfert */
+        /* signal end of transfer */
         s->isr |= ENISR_RDC;
         ne2000_update_irq(s);
     } else {

Index: hw/scsi-disk.c
===================================================================
RCS file: /sources/qemu/qemu/hw/scsi-disk.c,v
retrieving revision 1.14

scsi-disk.c +1 -1
diff -u -b -B -r1.14 scsi-disk.c
@@ -489,7 +489,7 @@
         is_write = 1;
         break;
     case 0x35:
-        DPRINTF("Syncronise cache (sector %d, count %d)\n", lba, len);
+        DPRINTF("Synchronise cache (sector %d, count %d)\n", lba, len);
         bdrv_flush(s->bdrv);
         break;
     case 0x43:

Index: hw/vga.c
===================================================================
RCS file: /sources/qemu/qemu/hw/vga.c,v
retrieving revision 1.51

vga.c +1 -1
diff -u -b -B -r1.51 vga.c
@@ -346,7 +351,7 @@
         case 0x09:
         case 0x0c:
         case 0x0d:
-        case 0x12: /* veritcal display end */
+        case 0x12: /* vertical display end */
             s->cr[s->cr_index] = val;
             break;
         default:

Index: linux-user/elfload.c
===================================================================
RCS file: /sources/qemu/qemu/linux-user/elfload.c,v retrieving revision 1.41

elfload.c +2 -2
diff -u -b -B -r1.41 elfload.c
@@ -799,7 +799,7 @@
 #endif
 
         if (interp_elf_ex->e_type == ET_DYN) {
-            /* in order to avoid harcoding the interpreter load
+            /* in order to avoid hardcoding the interpreter load
                address in qemu, we allocate a big enough memory zone */
             error = target_mmap(0, INTERP_MAP_SIZE,
                                 PROT_NONE, MAP_PRIVATE | MAP_ANON, 
@@ -1191,7 +1191,7 @@
                base, as well as whatever program they might try to exec.  This
                is because the brk will follow the loader, and is not movable.  */
             /* NOTE: for qemu, we do a big mmap to get enough space
-               without harcoding any address */
+               without hardcoding any address */
             error = target_mmap(0, ET_DYN_MAP_SIZE,
                                 PROT_NONE, MAP_PRIVATE | MAP_ANON, 
                                 -1, 0);

Index: target-i386/translate.c
===================================================================
RCS file: /sources/qemu/qemu/target-i386/translate.c,v retrieving revision 1.64

translate.c +1 -1
diff -u -b -B -r1.64 translate.c
@@ -6431,7 +6432,7 @@
 
     opc_ptr = opc_buf + opc_buf_len;
     /* live_flags contains the flags needed by the next instructions
-       in the code. At the end of the bloc, we consider that all the
+       in the code. At the end of the block, we consider that all the
        flags are live. */
     live_flags = CC_OSZAPC;
     while (opc_ptr > opc_buf) {