4Gb ram not showing up
Hi everyone.
I am having some difficulty trying to get my 4Gb of ram recognized by the system. I have tried googling around to get some information on how to do this configuration, but I have come up dry. I suspect that the reason that there is not much info on how to set things up is because usually it just works. However, on my system I don't think it is.
By the way, I am not subscribed to this mailing list, so could you please CC me any replies.
The basics are that I have an Athlon 64 X2 Dual core, 4Gb ram, ASUS M2N-MX motherboard. The bios has a configuration item for MTRR mapping, with options for CONTINUOUS and DISCRETE. I have selected CONTINUOUS, which explicitly describes the PCI hole as non-cacheable. The other option leaves the PCI hole undescribed.
My config has selectedCONFIG_HIGHMEM4G=y
free -m reports the following....
total used free shared buffers cached
Mem: 2906 2794 112 0 275 31 -/+ buffers/cache: 2487 419
Swap: 4996 366 4630
/proc/mtrr contains the following....
reg00: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg01: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
reg02: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1
Relevant bootup messages include these....
Jun 3 13:50:52 fawkes Linux version 2.6.20-gentoo-r8 (root@fawkes) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #6 SMP Tue May 15 10:18:59 EDT 2007 Jun 3 13:50:52 fawkes BIOS-provided physical RAM map: Jun 3 13:50:52 fawkes sanitize start Jun 3 13:50:52 fawkes sanitize end Jun 3 13:50:52 fawkes copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 Jun 3 13:50:52 fawkes copy_e820_map() type is E820_RAM Jun 3 13:50:52 fawkes copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 0000000000100000 size: 00000000b7ec0000 end: 00000000b7fc0000 type: 1 Jun 3 13:50:52 fawkes copy_e820_map() type is E820_RAM Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000b7fc0000 size: 000000000000e000 end: 00000000b7fce000 type: 3 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000b7fce000 size: 0000000000022000 end: 00000000b7ff0000 type: 4 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000b7ff0000 size: 0000000000010000 end: 00000000b8000000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000fee00000 size: 0000000000100000 end: 00000000fef00000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 0000000100000000 size: 0000000040000000 end: 0000000140000000 type: 1 Jun 3 13:50:52 fawkes copy_e820_map() type is E820_RAM Jun 3 13:50:52 fawkes BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Jun 3 13:50:52 fawkes BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Jun 3 13:50:52 fawkes BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jun 3 13:50:52 fawkes BIOS-e820: 0000000000100000 - 00000000b7fc0000 (usable) Jun 3 13:50:52 fawkes BIOS-e820: 00000000b7fc0000 - 00000000b7fce000 (ACPI data) Jun 3 13:50:52 fawkes BIOS-e820: 00000000b7fce000 - 00000000b7ff0000 (ACPI NVS) Jun 3 13:50:52 fawkes BIOS-e820: 00000000b7ff0000 - 00000000b8000000 (reserved) Jun 3 13:50:52 fawkes BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Jun 3 13:50:52 fawkes BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) Jun 3 13:50:52 fawkes BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) Jun 3 13:50:52 fawkes BIOS-e820: 0000000100000000 - 0000000140000000 (usable) Jun 3 13:50:52 fawkes Warning only 4GB will be used. Jun 3 13:50:52 fawkes Use a PAE enabled kernel. Jun 3 13:50:52 fawkes 3200MB HIGHMEM available. Jun 3 13:50:52 fawkes 896MB LOWMEM available. Jun 3 13:50:52 fawkes found SMP MP-table at 000ff780 Jun 3 13:50:52 fawkes Entering add_active_range(0, 0, 1048576) 0 entries of 256 used Jun 3 13:50:52 fawkes Zone PFN ranges: Jun 3 13:50:52 fawkes DMA 0 -> 4096 Jun 3 13:50:52 fawkes Normal 4096 -> 229376 Jun 3 13:50:52 fawkes HighMem 229376 -> 1048576 Jun 3 13:50:52 fawkes early_node_map[1] active PFN ranges Jun 3 13:50:52 fawkes 0: 0 -> 1048576 Jun 3 13:50:52 fawkes On node 0 totalpages: 1048576 Jun 3 13:50:52 fawkes DMA zone: 32 pages used for memmap Jun 3 13:50:52 fawkes DMA zone: 0 pages reserved Jun 3 13:50:52 fawkes DMA zone: 4064 pages, LIFO batch:0 Jun 3 13:50:52 fawkes Normal zone: 1760 pages used for memmap Jun 3 13:50:52 fawkes Normal zone: 223520 pages, LIFO batch:31 Jun 3 13:50:52 fawkes HighMem zone: 6400 pages used for memmap Jun 3 13:50:52 fawkes HighMem zone: 812800 pages, LIFO batch:31 Jun 3 13:50:52 fawkes DMI 2.3 present. Jun 3 13:50:52 fawkes Using APIC driver default Jun 3 13:50:52 fawkes ACPI: RSDP (v002 ACPIAM ) @ 0x000fbab0 Jun 3 13:50:52 fawkes ACPI: XSDT (v001 A M I OEMXSDT 0x09000606 MSFT 0x00000097) @ 0xb7fc0100 Jun 3 13:50:52 fawkes ACPI: FADT (v003 A M I OEMFACP 0x09000606 MSFT 0x00000097) @ 0xb7fc0290 Jun 3 13:50:52 fawkes ACPI: MADT (v001 A M I OEMAPIC 0x09000606 MSFT 0x00000097) @ 0xb7fc0390 Jun 3 13:50:52 fawkes ACPI: MCFG (v001 A M I OEMMCFG 0x09000606 MSFT 0x00000097) @ 0xb7fc0400 Jun 3 13:50:52 fawkes ACPI: OEMB (v001 A M I AMI_OEM 0x09000606 MSFT 0x00000097) @ 0xb7fce040 Jun 3 13:50:52 fawkes ACPI: SSDT (v001 A M I POWERNOW 0x00000001 AMD 0x00000001) @ 0xb7fc5300 Jun 3 13:50:52 fawkes ACPI: DSDT (v001 A0557 A0557000 0x00000000 INTL 0x02002026) @ 0x00000000 Jun 3 13:50:52 fawkes Nvidia board detected. Ignoring ACPI timer override. Jun 3 13:50:52 fawkes If you got timer trouble try acpi_use_timer_override Jun 3 13:50:52 fawkes Nvidia board detected. Ignoring ACPI timer override. Jun 3 13:50:52 fawkes If you got timer trouble try acpi_use_timer_override Jun 3 13:50:52 fawkes Nvidia board detected. Ignoring ACPI timer override. Jun 3 13:50:52 fawkes If you got timer trouble try acpi_use_timer_override Jun 3 13:50:52 fawkes Nvidia board detected. Ignoring ACPI timer override. Jun 3 13:50:52 fawkes If you got timer trouble try acpi_use_timer_override Jun 3 13:50:52 fawkes ACPI: PM-Timer IO Port: 0x508 Jun 3 13:50:52 fawkes ACPI: Local APIC address 0xfee00000 Jun 3 13:50:52 fawkes ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Jun 3 13:50:52 fawkes Processor #0 15:11 APIC version 16 Jun 3 13:50:52 fawkes ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Jun 3 13:50:52 fawkes Processor #1 15:11 APIC version 16 Jun 3 13:50:52 fawkes ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Jun 3 13:50:52 fawkes IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 Jun 3 13:50:52 fawkes ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) Jun 3 13:50:52 fawkes ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Jun 3 13:50:52 fawkes ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) Jun 3 13:50:52 fawkes ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) Jun 3 13:50:52 fawkes ACPI: IRQ0 used by override. Jun 3 13:50:52 fawkes ACPI: IRQ9 used by override. Jun 3 13:50:52 fawkes ACPI: IRQ14 used by override. Jun 3 13:50:52 fawkes ACPI: IRQ15 used by override. Jun 3 13:50:52 fawkes Enabling APIC mode: Flat. Using 1 I/O APICs Jun 3 13:50:52 fawkes Using ACPI (MADT) for SMP configuration information Jun 3 13:50:52 fawkes Allocating PCI resources starting at c0000000 (gap: b8000000:46c00000) Jun 3 13:50:52 fawkes Detected 2009.188 MHz processor. Jun 3 13:50:52 fawkes Built 1 zonelists. Total pages: 1040384 Jun 3 13:50:52 fawkes Kernel command line: root=/dev/sda2 Jun 3 13:50:52 fawkes mapped APIC to ffffd000 (fee00000) Jun 3 13:50:52 fawkes mapped IOAPIC to ffffc000 (fec00000) Jun 3 13:50:52 fawkes Enabling fast FPU save and restore... done. Jun 3 13:50:52 fawkes Enabling unmasked SIMD FPU exception support... done. Jun 3 13:50:52 fawkes Initializing CPU#0 Jun 3 13:50:52 fawkes PID hash table entries: 4096 (order: 12, 16384 bytes) Jun 3 13:50:52 fawkes spurious 8259A interrupt: IRQ7. Jun 3 13:50:52 fawkes Console: colour VGA+ 80x25 Jun 3 13:50:52 fawkes Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jun 3 13:50:52 fawkes Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jun 3 13:50:52 fawkes Memory: 2975372k/4194304k available (2686k kernel code, 37964k reserved, 935k data, 272k init, 2096896k highmem) Jun 3 13:50:52 fawkes virtual kernel memory layout: Jun 3 13:50:52 fawkes fixmap : 0xfff9c000 - 0xfffff000 ( 396 kB) Jun 3 13:50:52 fawkes pkmap : 0xff800000 - 0xffc00000 (4096 kB) Jun 3 13:50:52 fawkes vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) Jun 3 13:50:52 fawkes lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) Jun 3 13:50:52 fawkes .init : 0xc0491000 - 0xc04d5000 ( 272 kB) Jun 3 13:50:52 fawkes .data : 0xc039fa7d - 0xc0489a18 ( 935 kB) Jun 3 13:50:52 fawkes .text : 0xc0100000 - 0xc039fa7d (2686 kB)
Any suggestions as to what I can try to get all 4Gb of ram to show up?
Thanks,
Tom
Quoted 9 lines · Tom Moore
I am having some difficulty trying to get my 4Gb of ram recognized by the system. I have tried googling around to get some information on how to do this configuration, but I have come up dry. I suspect that the reason that there is not much info on how to set things up is because usually it just works. However, on my system I don't think it is.
By the way, I am not subscribed to this mailing list, so could you please CC me any replies.
Quoted 8 lines
The basics are that I have an Athlon 64 X2 Dual core, 4Gb ram, ASUS M2N-MX motherboard. The bios has a configuration item for MTRR mapping, with options for CONTINUOUS and DISCRETE. I have selected CONTINUOUS, which explicitly describes the PCI hole as non-cacheable. The other option leaves the PCI hole undescribed.
My config has selected
CONFIG_HIGHMEM4G=y
That supports of to 4GB memory space.
Quoted 4 lines
free -m reports the following....
total used free shared buffers cachedMem: 2906 2794 112 0 275 31 -/+ buffers/cache: 2487 419
Quoted 8 lines
Swap: 4996 366 4630
/proc/mtrrcontains the following....reg00: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg01: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
reg02: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1
Your memory map however has 3GB at address 0 and 1GB at address 4GB (so memory is places at address 0 - 3GB and 4-5GB. The addresses from 3 to 4GB are reserved for PCI).
If you run a 64bit kernel you will see it all, or you can use a kernel configured for 64GB memory space.
Quoted 47 lines
Relevant bootup messages include these....
Jun 3 13:50:52 fawkes Linux version 2.6.20-gentoo-r8 (root@fawkes) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #6 SMP Tue May 15 10:18:59 EDT 2007 Jun 3 13:50:52 fawkes BIOS-provided physical RAM map: Jun 3 13:50:52 fawkes sanitize start Jun 3 13:50:52 fawkes sanitize end Jun 3 13:50:52 fawkes copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 Jun 3 13:50:52 fawkes copy_e820_map() type is E820_RAM Jun 3 13:50:52 fawkes copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 0000000000100000 size: 00000000b7ec0000 end: 00000000b7fc0000 type: 1 Jun 3 13:50:52 fawkes copy_e820_map() type is E820_RAM Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000b7fc0000 size: 000000000000e000 end: 00000000b7fce000 type: 3 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000b7fce000 size: 0000000000022000 end: 00000000b7ff0000 type: 4 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000b7ff0000 size: 0000000000010000 end: 00000000b8000000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000fee00000 size: 0000000000100000 end: 00000000fef00000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 0000000100000000 size: 0000000040000000 end: 0000000140000000 type: 1 Jun 3 13:50:52 fawkes copy_e820_map() type is E820_RAM Jun 3 13:50:52 fawkes BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Jun 3 13:50:52 fawkes BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Jun 3 13:50:52 fawkes BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jun 3 13:50:52 fawkes BIOS-e820: 0000000000100000 - 00000000b7fc0000 (usable) Jun 3 13:50:52 fawkes BIOS-e820: 00000000b7fc0000 - 00000000b7fce000 (ACPI data) Jun 3 13:50:52 fawkes BIOS-e820: 00000000b7fce000 - 00000000b7ff0000 (ACPI NVS) Jun 3 13:50:52 fawkes BIOS-e820: 00000000b7ff0000 - 00000000b8000000 (reserved) Jun 3 13:50:52 fawkes BIOS-e820: 00000000fec00000 - 00000000fec01000(reserved)
Quoted 8 lines
Jun 3 13:50:52 fawkes BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) Jun 3 13:50:52 fawkes BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) Jun 3 13:50:52 fawkes BIOS-e820: 0000000100000000 - 0000000140000000 (usable) Jun 3 13:50:52 fawkes Warning only 4GB will be used. Jun 3 13:50:52 fawkes Use a PAE enabled kernel.
Oh look, it even tells you right there that you have to use a PAE (>4GB for 32bit machines) kernel to get all your ram.
--
Len Sorensen
Thank you for the reply back. Your answer makes perfect sense to me, and it is what I had suspected but was not sure about. The math seems to indicate that 4Gb of ram plus 1Gb of PCI address space equals 5Gb of memory space. So it does sound like I should have a larger kernel model.
What confused me the most (and still does), is the help message string that is presented for the CONFIG_HIGHMEM4G option:
"Select this if you have a 32-bit processor and between 1 and 4
gigabytes of physical RAM."
Well that sounds like the amount of memory that I have, so that is what I selected.
Also, although I know what PAE stands for, I don't know how to select it when building a kernel. Would I get this from the CONFIG_HIGHMEM64G option? The help text for that says:
"Select this if you have a 32-bit processor and more than 4 gigabytes
of physical RAM."
This does not sound like it applies to my hardware. There is something wrong with my understanding, or with these message strings. I am still confused.
Tom
Quoted 77 lines · Lennart Sorensen
Quoted 9 lines · Tom Moore
I am having some difficulty trying to get my 4Gb of ram recognized by the system. I have tried googling around to get some information on how to do this configuration, but I have come up dry. I suspect that the reason that there is not much info on how to set things up is because usually it just works. However, on my system I don't think it is.
By the way, I am not subscribed to this mailing list, so could you please CC me any replies.
The basics are that I have an Athlon 64 X2 Dual core, 4Gb ram, ASUS M2N-MX motherboard. The bios has a configuration item for MTRR mapping, with options for CONTINUOUS and DISCRETE. I have selected CONTINUOUS, which explicitly describes the PCI hole as non-cacheable. The other option leaves the PCI hole undescribed.
My config has selected
CONFIG_HIGHMEM4G=yThat supports of to 4GB memory space.
Quoted 4 lines
free -m reports the following....
total used free shared buffers cachedMem: 2906 2794 112 0 275 31 -/+ buffers/cache: 2487 419Quoted 9 lines
Swap: 4996 366 4630
/proc/mtrrcontains the following....reg00: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg01: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
reg02: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1Your memory map however has 3GB at address 0 and 1GB at address 4GB (so memory is places at address 0 - 3GB and 4-5GB. The addresses from 3 to 4GB are reserved for PCI).
If you run a 64bit kernel you will see it all, or you can use a kernel configured for 64GB memory space.
Quoted 24 lines
Relevant bootup messages include these....
Jun 3 13:50:52 fawkes Linux version 2.6.20-gentoo-r8 (root@fawkes) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #6 SMP Tue May 15 10:18:59 EDT 2007 Jun 3 13:50:52 fawkes BIOS-provided physical RAM map: Jun 3 13:50:52 fawkes sanitize start Jun 3 13:50:52 fawkes sanitize end Jun 3 13:50:52 fawkes copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 Jun 3 13:50:52 fawkes copy_e820_map() type is E820_RAM Jun 3 13:50:52 fawkes copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 0000000000100000 size: 00000000b7ec0000 end: 00000000b7fc0000 type: 1 Jun 3 13:50:52 fawkes copy_e820_map() type is E820_RAM Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000b7fc0000 size: 000000000000e000 end: 00000000b7fce000 type: 3 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000b7fce000 size: 0000000000022000 end: 00000000b7ff0000 type: 4 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000b7ff0000 size: 0000000000010000 end: 00000000b8000000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000fee00000 size: 0000000000100000 end: 00000000fef00000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2 Jun 3 13:50:52 fawkes copy_e820_map() start: 0000000100000000 size: 0000000040000000 end: 0000000140000000 type: 1 Jun 3 13:50:52 fawkes copy_e820_map() type is E820_RAM Jun 3 13:50:52 fawkes BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Jun 3 13:50:52 fawkes BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Jun 3 13:50:52 fawkes BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jun 3 13:50:52 fawkes BIOS-e820: 0000000000100000 - 00000000b7fc0000 (usable) Jun 3 13:50:52 fawkes BIOS-e820: 00000000b7fc0000 - 00000000b7fce000 (ACPI data)Quoted 9 lines
Jun 3 13:50:52 fawkes BIOS-e820: 00000000b7fce000 - 00000000b7ff0000 (ACPI NVS) Jun 3 13:50:52 fawkes BIOS-e820: 00000000b7ff0000 - 00000000b8000000 (reserved) Jun 3 13:50:52 fawkes BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Jun 3 13:50:52 fawkes BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) Jun 3 13:50:52 fawkes BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) Jun 3 13:50:52 fawkes BIOS-e820: 0000000100000000 - 0000000140000000 (usable) Jun 3 13:50:52 fawkes Warning only 4GB will be used. Jun 3 13:50:52 fawkes Use a PAE enabled kernel.Oh look, it even tells you right there that you have to use a PAE (>4GB for 32bit machines) kernel to get all your ram.
--
Len Sorensen
Quoted 9 lines · Tom Moore
Thank you for the reply back. Your answer makes perfect sense to me, and it is what I had suspected but was not sure about. The math seems to indicate that 4Gb of ram plus 1Gb of PCI address space equals 5Gb of memory space. So it does sound like I should have a larger kernel model.
What confused me the most (and still does), is the help message string that is presented for the
CONFIG_HIGHMEM4Goption:
"Select this if you have a 32-bit processor and between 1 and 4
gigabytes of physical RAM."
4 is not between 1 and 4.
Quoted 2 lines
Well that sounds like the amount of memory that I have, so that is what I selected.
You should select CONFIG_HIGHMEM64G.
Quoted 5 lines
Also, although I know what PAE stands for, I don't know how to select it when building a kernel. Would I get this from the
CONFIG_HIGHMEM64Goption? The help text for that says:
"Select this if you have a 32-bit processor and more than 4 gigabytes
of physical RAM."
Personally, I feel the wording should say:
Select this if you have a 32-bit processor and 4 or more gigabytes of physical RAM.
It may not hurt to say 3 or more, but I'm not that familiar with x86 hardware in regards to memory.
Quoted 3 lines
This does not sound like it applies to my hardware. There is something wrong with my understanding, or with these message strings. I am still confused.
It does.
Here's my system (4gb of memory):
total used free shared buffers cached
Mem: 3619996 3289352 330644 0 469764 2025416
-/+ buffers/cache: 794172 2825824
Swap: 0 0 0
I know it says 3.6gb of memory, but 4gb is installed. I had 5gb in this machine and I saw all 5gb. This is a 32-bit dual xeon (12gb max memory)
I would be interested to know where the last 400mb of memory went.
Signature · 2 lines
Lab tests show that use of micro$oft causes cancer in lab animals Got Gas???
Quoted 11 lines · Wakko Warner
Quoted 6 lines · Tom Moore
Thank you for the reply back. Your answer makes perfect sense to me, and it is what I had suspected but was not sure about. The math seems to indicate that 4Gb of ram plus 1Gb of PCI address space equals 5Gb of memory space. So it does sound like I should have a larger kernel model.
What confused me the most (and still does), is the help message string that is presented for the
CONFIG_HIGHMEM4Goption:
"Select this if you have a 32-bit processor and between 1 and 4
gigabytes of physical RAM."4 is not between 1 and 4.
This idiomatic phrase suggests to me that it applies when ram is >= 1Gb and <= 4Gb. The fact that we interpret it differently indicates that it could be more clearly stated. If your interpretation is correct, then what would this mean when a machine had 3.5Gb of ram installed?
Quoted 12 lines
Quoted 3 lines
Well that sounds like the amount of memory that I have, so that is what I selected.
You should select
CONFIG_HIGHMEM64G.Quoted 4 lines
Also, although I know what PAE stands for, I don't know how to select it when building a kernel. Would I get this from the
CONFIG_HIGHMEM64Goption? The help text for that says:
"Select this if you have a 32-bit processor and more than 4 gigabytes
of physical RAM."
Quoted 8 lines
Personally, I feel the wording should say:
Select this if you have a 32-bit processor and 4 or more gigabytes of physical RAM.It may not hurt to say 3 or more, but I'm not that familiar with x86 hardware in regards to memory.
Ok, so it appears that this one is wrong also. If someone could explain the rules that apply, I would be happy to prepare a patch to the Kconfig script. I don't consider myself to be completely stupid, and if the help text was a bit more clear I wouldn't be asking these questions. I'm sure that other pilgrims will follow along later with the same questions.
Quoted 17 lines
Quoted 2 lines
This does not sound like it applies to my hardware. There is something wrong with my understanding, or with these message strings. I am still confused.
It does.
Here's my system (4gb of memory):
total used free shared buffers cached
Mem: 3619996 3289352 330644 0 469764 2025416
-/+ buffers/cache: 794172 2825824
Swap: 0 0 0I know it says 3.6gb of memory, but 4gb is installed. I had 5gb in this machine and I saw all 5gb. This is a 32-bit dual xeon (12gb max memory)
I would be interested to know where the last 400mb of memory went.
Quoted 6 lines · Tom Moore
Ok, so it appears that this one is wrong also. If someone could explain the rules that apply, I would be happy to prepare a patch to the
Kconfigscript. I don't consider myself to be completely stupid, and if the help text was a bit more clear I wouldn't be asking these questions. I'm sure that other pilgrims will follow along later with the same questions.
If you do create such a patch, please also state that HIGHMEM64G is
necessary for support of the NX bit (on those processors that support it).
ISTR that a similar issue exists in the NOHIGHMEM case, where some
150MB or so of RAM would be unusable in a 1GB machine with NOHIGHMEM. I could be mis-remembering, that, though.
--
Joseph Fannin
[email protected] || [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 9 lines · Tom Moore
Thank you for the reply back. Your answer makes perfect sense to me, and it is what I had suspected but was not sure about. The math seems to indicate that 4Gb of ram plus 1Gb of PCI address space equals 5Gb of memory space. So it does sound like I should have a larger kernel model.
What confused me the most (and still does), is the help message string that is presented for the
CONFIG_HIGHMEM4Goption:
"Select this if you have a 32-bit processor and between 1 and 4
gigabytes of physical RAM."
A better description would be:
"Select this if you have a 32-bit processor and memory mapped in the 1GB to 4GB address range."
Quoted 8 lines
Well that sounds like the amount of memory that I have, so that is what I selected.
Also, although I know what PAE stands for, I don't know how to select it when building a kernel. Would I get this from the
CONFIG_HIGHMEM64Goption? The help text for that says:
"Select this if you have a 32-bit processor and more than 4 gigabytes
of physical RAM."
That one would be better as:
"Select this if you have a 32-bit processor and ram mapped in the address range above 4GB."
Quoted 3 lines
This does not sound like it applies to my hardware. There is something wrong with my understanding, or with these message strings. I am still confused.
In the past a number of machines couldn't remap memory, so you simply lost any that was covered by the PCI address space. In that case 4GB ram mean you got 3GB or 3.5GB ram, and turning on HIGHMEM64G wouldn't help.
In your case with some ram mapped above 4GB, you want the option that supports up to 64GB ram (the limit of PAE) which is the CONFIG_HIGHMEM64G. After all since some ram is mapped between 4 and 5GB, it is as if you had 5GB ram, but the part between 3 and 4GB was covered up. You are just lucky enough that the covered up part got moved out of the way instead so you get to use it.
--
Len Sorensen
Quoted 10 lines · Lennart Sorensen
[...]
A better description would be:"Select this if you have a 32-bit processor and memory mapped in the 1GB to 4GB address range."
[...]
That one would be better as:"Select this if you have a 32-bit processor and ram mapped in the address range above 4GB."
Ugh, no! How can we expect the user compiling a kernel to be *so* familiar with address space re-mapping / BIOSen (_his_ particular BIOS, specifically, and what / how it re-maps memory) / etc to be able to answer such questions? "Select ... if you have ... RAM installed" is perfectly clear, simple, and all that's needed.
BTW, just imagine what a user would need to do to make things work as per your proposal. Build some kernel (don't care about memory loss), boot and find what his firmware prefers to do with address space (or else read up the BIOS documentation!) and _then_ again build a new kernel, this time selecting the options appropriately ...
Also, note that the change you're proposing is unnecessary! As Andi pointed out, this issue has more to do with broken BIOSen and the proper fix for Tom is to contact his vendor and flash / upgrade the BIOS firmware. I don't see anything wrong with the Kconfig help texts.
Quoted 9 lines · Satyam Sharma
Quoted 8 lines · Lennart Sorensen
[...]
A better description would be:"Select this if you have a 32-bit processor and memory mapped in the 1GB to 4GB address range."
[...]
That one would be better as:
Quoted 8 lines
Quoted 2 lines
"Select this if you have a 32-bit processor and ram mapped in the address range above 4GB."
Ugh, no! How can we expect the user compiling a kernel to be *so* familiar with address space re-mapping / BIOSen (_his_ particular BIOS, specifically, and what / how it re-maps memory) / etc to be able to answer such questions? "Select ... if you have ... RAM installed" is perfectly clear, simple, and all that's needed.
Then explain it.
"Select this if you have a 32 bit cpu and ram mapped above 4 G. To see where RAM is mapped, interpret the E820 lines from dmesg, for more information see Documentation/e820.txt"
or something like that.
Jan
Quoted 9 lines · Satyam Sharma
Quoted 8 lines · Lennart Sorensen
[...]
A better description would be:"Select this if you have a 32-bit processor and memory mapped in the 1GB to 4GB address range."
[...]
That one would be better as:
Quoted 9 lines
Quoted 2 lines
"Select this if you have a 32-bit processor and ram mapped in the address range above 4GB."
Ugh, no! How can we expect the user compiling a kernel to be *so* familiar with address space re-mapping / BIOSen (_his_ particular BIOS, specifically, and what / how it re-maps memory) / etc to be able to answer such questions? "Select ... if you have ... RAM installed" is perfectly clear, simple, and all that's needed.
However the KConfig help message as it is currently written is wrong.
Quoted 6 lines
BTW, just imagine what a user would need to do to make things work as per your proposal. Build some kernel (don't care about memory loss), boot and find what his firmware prefers to do with address space (or else read up the BIOS documentation!) and _then_ again build a new kernel, this time selecting the options appropriately ...
I tried to do this, but the Kconfig help message was misleading. I still needed to come here for help.
Quoted 6 lines
Also, note that the change you're proposing is unnecessary! As Andi pointed out, this issue has more to do with broken BIOSen and the proper fix for Tom is to contact his vendor and flash / upgrade the BIOS firmware. I don't see anything wrong with the
Kconfighelp texts.
Andi was wrong. It appears that he read the first sentence of my email and jumped to a conclusion. The /proc/mtrr output that I included in my first post showed the my bios was doing the right thing. My problem was that I was using CONFIG_HIGHMEM4G, which is what the KConfig help message told me to do. After switching to CONFIG_HIGHMEM64G the OS was able to map all of my ram.
total used free shared buffers cached Mem: 4016768 3924312 92456 0 360132 3030336
-/+ buffers/cache: 533844 3482924
Swap: 5116692 2676 5114016
Thanks to those with the correct advice. I'm sure I would have got this by trying each memory model in turn, but at least now I know what is going on.
Tom
Quoted 13 lines · Satyam Sharma
Ugh, no! How can we expect the user compiling a kernel to be *so* familiar with address space re-mapping / BIOSen (_his_ particular BIOS, specifically, and what / how it re-maps memory) / etc to be able to answer such questions? "Select ... if you have ... RAM installed" is perfectly clear, simple, and all that's needed.
BTW, just imagine what a user would need to do to make things work as per your proposal. Build some kernel (don't care about memory loss), boot and find what his firmware prefers to do with address space (or else read up the BIOS documentation!) and _then_ again build a new kernel, this time selecting the options appropriately ...
Quoted 5 lines
Also, note that the change you're proposing is unnecessary! As Andi pointed out, this issue has more to do with broken BIOSen and the proper fix for Tom is to contact his vendor and flash / upgrade the BIOS firmware. I don't see anything wrong with the
Kconfighelp texts.
Well no. If you have 4GB of ram, and a proper BIOS, then you NEED a kernel configured for 64GB ram since PCI will take at least 0.5GB of it and make it remapped above the 4GB address. So describing the CONFIG_4GB option as being correct for people with 1 to 4GB ram is very much wrong for almost all systems. It would only be correct for those systems where the bios or chipset incorrectly does not remap memory above the PCI address space. The current description is in fact wrong when the bios isn't broken. Somewhere around 3 or 3.5GB seems to be the limit for the CONFIG_4GB option. Any more and you need the CONFIG_64GB option instead, unless your bios and/or chipset sucks in which case you simply loose the ram in the PCI space and you might as well stick with the CONFIG_4GB option to keep full performance.
--
Len Sorensen
Quoted 3 lines · Tom Moore
Hi everyone.
I am having some difficulty trying to get my 4Gb of ram recognized by
This really seems to become a FAQ recently. Please look in the archives. In short your BIOS is broken. Complain to your BIOS vendor.
Anyone interested to write up some web page (all the necessary information on this has been posted many times in the past) with a FAQ that people could be pointed to?
-Andi