amd64_edac: EDAC module for AMD64
Quoted 11 lines · Andi Kleen
From: Andi Kleen <[email protected]>
Subject: Re: [RFC PATCH 00/21 v2]amd64_edac: EDAC module for AMD64
To: "Doug Thompson" <[email protected]>
Cc: "Andi Kleen" <[email protected]>
Date: Thursday, April 30, 2009, 1:05 AMQuoted 5 lines
The problem we have had is once
an Uncorrected Error fires and dumps the address, mapping it to the DIMM silk screen label is difficult, especially in user space, in gaining access to the registers of the controller.
Quoted 5 lines
You can just do it either after reboot or in the crash kernel. I don't
think it's required to put it all in kernel. Also you don't really
need access to the registers;
Actually, according to AMD, their reference code for mapping from an error address to a memory slot does require access to the controller's registers. On page 67 of the BKDG for family F10 from their website is 2 and 1/2 pages of the code to perform that mapping. It takes into consideration interleaving of all kinds, etc. It is narly to say the least.
Quoted 3 lines
SMBIOS provides this
information and
mcelog knows how to convert it.
As I undestand SMBIOS it provides a linear assignment of basic memory starts and lengths but does not provide the memory controller context as AMD's reference code takes into consideration
Quoted 11 lines
Trying to add other consumers to
mce.cwill be likely very messy;
there's really no generic way to do it. I hope you're not planning
turning the nicely CPU independent code inmce.cinto a mess
of twisty CPU specific passages like the old 32bit code was.-Andi
No, not at all. Keeping the "clean" code is paramount, but we are seeking for an interface to accept the MCE error register structure and map that information to at least a DIMM label field, if not more.
The EDAC module would register for that interface upon loading and unregister upon module unload.
The MCE code would call a stub routine that either returns no mapping occurred OR call the EDAC mapper. MCE could then determine from that return code if a mapping occurred or not. If it did, then display the desired information, otherwise proceed as normal.
doug t