Skip to contentSkip to conversation

machine driver and channel configuration

ASoC Matthieu CASTET 3 participants 4 messages Jun 8, 2007 – Jun 12, 2007

lore
Share & tools
lore
#0 lore raw

Hi,

If the platform/cpu_dai driver and codec support capture and playback channels. But on the board only the playback link is connected.

In this configuration, the codec and platform/cpu_dai driver shouldn't try to use the capture path (and the resource associated to this).

Is there a way to do something like that ?

Thanks

Matthieu

#1 lore raw
Quoted 10 lines · Matthieu CASTET

Hi,

If the platform/cpu_dai driver and codec support capture and playback channels. But on the board only the playback link is connected.

In this configuration, the codec and platform/cpu_dai driver shouldn't try to use the capture path (and the resource associated to this).

Is there a way to do something like that ?

I'm just learning about ASoC myself, but using wm8731.c as an example, wouldn't this work:

struct snd_soc_codec_dai wm8731_dai = {
	.name = "WM8731",
	.playback = {
		.stream_name = "Playback",
		.channels_min = 1,
		.channels_max = 2,
		.rates = WM8731_RATES,
		.formats = WM8731_FORMATS,},
	.capture = {
		.stream_name = "Capture",
		.channels_min = 1,
		.channels_max = 2,
		.rates = WM8731_RATES,
		.formats = WM8731_FORMATS,},

Just change capture.channels_min and channels_max to 0.

Signature · 2 lines
Timur Tabi
Linux Kernel Developer @ Freescale
#2 lore raw

Hi,

Quoted 32 lines · Timur Tabi
Quoted 6 lines · Matthieu CASTET

Hi,

If the platform/cpu_dai driver and codec support capture and playback channels.
But on the board only the playback link is connected.

Quoted 6 lines

In this configuration, the codec and platform/cpu_dai driver shouldn't try to
use the capture path (and the resource associated to this).

Is there a way to do something like that ?

I'm just learning about ASoC myself, but using wm8731.c as an example, wouldn't this work:

struct snd_soc_codec_dai wm8731_dai = {
    .name = "WM8731",
    .playback = {
        .stream_name = "Playback",
        .channels_min = 1,
        .channels_max = 2,
        .rates = WM8731_RATES,
        .formats = WM8731_FORMATS,},
    .capture = {
        .stream_name = "Capture",
        .channels_min = 1,
        .channels_max = 2,
        .rates = WM8731_RATES,
        .formats = WM8731_FORMATS,},
Quoted 2 lines

Just change capture.channels_min and channels_max to 0.

Hum, yes I could change channel info at runtime before doing the platform_device_add in machine driver.

I'll try that.

Thanks.
Matthieu

#3 lore raw

I think you can have multiple dai objects, in your dai object dont enable support for Capture, and use that dai object in your Machine driver.

This should solve the issue

Quoted 50 lines · Matthieu CASTET

Hi,

Quoted 32 lines · Timur Tabi
Quoted 6 lines · Matthieu CASTET

Hi,

If the platform/cpu_dai driver and codec support capture and playback channels.
But on the board only the playback link is connected.

Quoted 6 lines

In this configuration, the codec and platform/cpu_dai driver shouldn't try to
use the capture path (and the resource associated to this).

Is there a way to do something like that ?

I'm just learning about ASoC myself, but using wm8731.c as an example, wouldn't this work:

struct snd_soc_codec_dai wm8731_dai = {
    .name = "WM8731",
    .playback = {
        .stream_name = "Playback",
        .channels_min = 1,
        .channels_max = 2,
        .rates = WM8731_RATES,
        .formats = WM8731_FORMATS,},
    .capture = {
        .stream_name = "Capture",
        .channels_min = 1,
        .channels_max = 2,
        .rates = WM8731_RATES,
        .formats = WM8731_FORMATS,},
Quoted 2 lines

Just change capture.channels_min and channels_max to 0.

Hum, yes I could change channel info at runtime before doing the platform_device_add in machine driver.

I'll try that.

Thanks.
Matthieu
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel