Skip to contentSkip to conversation

2.6 kernel: Cannot make multiple dummy network interfaces

DISCUSSION Mike Schmidt 2 participants 3 messages Jun 8, 2007

lore
Share & tools
lore
#0 lore raw

(please cc me directly with any responses - I am not (yet) a member of this mailing list.

*2.6 kernel: Cannot make multiple dummy network interfaces*
------------------------------------------------------------------------
I'm trying to set up a number of dummy interfaces but FC6 (Centos4, even RHEL4) won't make more than 1. a modprobe -c lists two default dummy interfaces, dumm0 and dummy1, just as it did even back to rh8. On my rh8/rh9 systems, there is no problem, I can generate as many dummy n as I want by adding alias and options lines in modules.conf. On FC6/Centos/RHEL (I assume as of kernel 2.6, but I don't have any early FC systems running) I can only create 1 dummy. I am trying to build a network simulator for testing purposes - a bridge with 100+ network interfaces. They have to be dummy (not just an alias) because they need separate MAC addresses. I have tried the same thing on Knoppix, running 2.6.17, with the same results. Centos4 and RHEL4 use kernel 2.6.9

On FC6: (kernel 2.6.20)

Quoted 1 line

modprobe -c | grep dummy:

alias dummy0 dummy
alias dummy1 dummy
install dummy0 /sbin/modprobe -o dummy0 --ignore-install dummy install dummy1 /sbin/modprobe -o dummy1 --ignore-install dummy

Quoted 1 line

ip link

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:18:8b:e6:c3:82 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:0e:2e:b1:20:e6 brd ff:ff:ff:ff:ff:ff

Quoted 4 lines

modprobe dummy0
modprobe dummy1

ip link

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:18:8b:e6:c3:82 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:0e:2e:b1:20:e6 brd ff:ff:ff:ff:ff:ff
4: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop
link/ether aa:96:c7:d9:40:eb brd ff:ff:ff:ff:ff:ff

This same thing give me two dummy interfaces in rh8. I have no difficulty making 100 or more dummy interfaces in rh8. (running 2.4.31). Note that I have not made any changes to the modprobe configuration here. Normally I would have at least 100 aliases - dummy0-dummy99.

On all 2.6 kernels I have checked, the kernel config has CONFIG_DUMMY=m. However, the modprobe configuration for 2.4 kernels is different (uses option instead of install statements in modules.conf). Is there something going on that prevents me from loading multiple copies of the dummy driver? Is there anything I can do about this?

Thanks very much. There is very little information about this kind of thing available. I'm afraid I'm stuck between a rock and a hard place - I need 2.6 for some new device drivers not available in 2.4, and I need 2.54 for my dummy net devices....

Again, I thank anyone who can help me.

Mike

begin:vcard
fn:Mike Schmidt
n:Schmidt;Mike
org:Intello Technologies Inc.
adr;quoted-printable;quoted-printable:;;580 1=C3=A8re Rue;Saint-Jean-sur-Richelieu;Qu=C3=A9;J2X 3B4;Canada email;internet:[email protected]
title:Vice-President
tel;work:450-358-2266 x223
tel;cell:514-835-9497
x-mozilla-html:FALSE
url:http://www.intello.com
version:2.1
end:vcard

#1 lore raw
Quoted 16 lines · Mike Schmidt

(please cc me directly with any responses - I am not (yet) a member of this mailing list.

*2.6 kernel: Cannot make multiple dummy network interfaces*
------------------------------------------------------------------------
I'm trying to set up a number of dummy interfaces but FC6 (Centos4, even RHEL4) won't make more than 1. a modprobe -c lists two default dummy interfaces, dumm0 and dummy1, just as it did even back to rh8. On my rh8/rh9 systems, there is no problem, I can generate as many dummy n as I want by adding alias and options lines in modules.conf. On FC6/Centos/RHEL (I assume as of kernel 2.6, but I don't have any early FC systems running) I can only create 1 dummy. I am trying to build a network simulator for testing purposes - a bridge with 100+ network interfaces. They have to be dummy (not just an alias) because they need separate MAC addresses. I have tried the same thing on Knoppix, running 2.6.17, with the same results. Centos4 and RHEL4 use kernel 2.6.9

# modinfo dummy
filename:       /lib/modules/2.6.18-4-gx1/kernel/drivers/net/dummy.ko
license:        GPL
vermagic:       2.6.18-4-gx1 preempt mod_unload GEODEGX1 gcc-3.3
depends:
parm:           numdummies:Number of dummy pseudo devices (int)

Perhaps you want to pass that numdummies aregument with some value. The default may be pretty low.

--
Len Sorensen

#2 lore raw

Oh, yes! Thank you. The one thing I didn't check - since dummy had no parameters in 2.4 kernels, it didn't occur to me to do a modinfo. I just did a modprobe dummy0 numdummies=99 and there we are - 99 devices. Thank you. I will pass this info on. I searched high and lo through user groups and mailing lists, but dummy is such a common word that it is difficult to narrow down the search. Thank you again.

Mike

Quoted 7 lines · Lennart Sorensen
# modinfo dummy
filename:       /lib/modules/2.6.18-4-gx1/kernel/drivers/net/dummy.ko
license:        GPL
vermagic:       2.6.18-4-gx1 preempt mod_unload GEODEGX1 gcc-3.3
depends:
parm:           numdummies:Number of dummy pseudo devices (int)
Quoted 6 lines

Perhaps you want to pass that numdummies aregument with some value. The default may be pretty low.

--
Len Sorensen

begin:vcard
fn:Mike Schmidt
n:Schmidt;Mike
org:Intello Technologies Inc.
adr;quoted-printable;quoted-printable:;;580 1=C3=A8re Rue;Saint-Jean-sur-Richelieu;Qu=C3=A9;J2X 3B4;Canada email;internet:[email protected]
title:Vice-President
tel;work:450-358-2266 x223
tel;cell:514-835-9497
x-mozilla-html:FALSE
url:http://www.intello.com
version:2.1
end:vcard