HP PSC 1350 cardreader problem + fix, needs new unusal_dev FLAG

<I'm not subscribed, please keep me CC-ed>

Hi all,

I send this mail initially to the usb-storage list, and Alan Stren (in the CC) though it would be a good idea to discuss parts of this here.

After encountering this bug in RH bugzilla while doing bug triaging:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=158717

I thought hey, that reminds me the reader in my PSC has troubles too, lets see if I can fix this.

So after 3 long evenings of debugging, I finally have my cardreader working "properly" (what a piece of <beep>).

At first I tried and succeeded with US_FL_FIX_CAPACITY, that worked but gave me warnings that the partition was larger then the device, and read access beyond the end of device errors. But it worked now!

Further debugging has lead me to the following conclusion (with a few not suitable for submitting usb-storage mods to proof it, proof as in it works).

The HP PSC 1350 reader will "crash" and from that moment on no longer communicate in any sane way, if you try to read the last sector of an sdcard* in a read that is more then 1 sector, so trying to read 8 sectors starting at sector capicity-8 will crash it, as will reading 2 sectors starting at sector capicity-2, however reading the last sector in a one 1 sector read will succeed! (* xdcards seem to be fine).

I haven't tried if it will crash on larger then 1 sector writes which include the last sector too, I immediately added code to not do that in both the read and write paths. I have tested reading and writing the end of the disk with this kludge in and it works.

As said I currently have an "really ugly" (tm) patch which modifies READ_10 and
WRITE_10 commands as they are passed through the usb-storage driver. Before I write a "proper" patch I have some questions:
1) currently I have decided to add quirk code for this to the usb-storage
driver, as I don't want to polute the generic scsi code with this, but maybe
it would be better to add a quirk for this to the scsi layer?
2) What on earth should I name the flag for this?
3) Currently I just shorten the read / write by one sector. The scsi layer then
notices the 1 sector to short read/write and sends a new command for the
last sector. This works well, but is it ok to depend on the scsi layer
behaving this way?
4) Should I be checking for other READ_X and WRITE_x commands too?

Alan said that questions 1,3 and 4 would be best asked (and hopefully answered) here.

<I'm not subscribed, please keep me CC-ed>

Thanks & Regards,

Hans

It probably makes the most sense to keep this at the USB layer. I can't see any properly conforming SCSI device having this problem. Plus the command construction is currently a submit hot path for SCSI ... this would add an extra check to that path.

Yes, that's behaviour by design.

That depends on USB storage, but I think it currently sets the use_10_for_rw flag which forces us only to use READ_10/WRITE_10

James

Thanks for the quick and thorough answer! I've submitted a pathc for this to the usb-storage list.

Regards,

Hans