multiple routing tables for internal router programs
Maybe a strange request, I'll try to explain this as clearer as I can (forgive my bad english, please :-) ).
I'm setting a linux box as a router. My router uses multiple routing tables, so I can address the traffic from specific ip addresses of my lan to distinct ISPs providers (specifying a different default gateway fo r each table), marking packets with iptables (prerouting marks).
This works with the forwarding traffic (lan-ISPs) that crosses my router.
But how can I reach the same result for programs/services that are working INTO the linux box? All I want is that a program (ping, for examples, or a VOIP server, better) uses a secondary routing table in the same machine. In this mode, I can manipulate route settings for different classes of program in my router.
Is it possible?
Thanks
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 3 lines · Andrea
Maybe a strange request, I'll try to explain this as clearer as I can (forgive my bad english, please :-) ).
Está permitido responder en castellano en esta lista?
Quoted 5 lines
I'm setting a linux box as a router. My router uses multiple routing tables, so I can address the traffic from specific ip addresses of my lan to distinct ISPs providers (specifying a different default gateway fo r each table), marking packets with iptables (prerouting marks).
Quoted 8 lines
This works with the forwarding traffic (lan-ISPs) that crosses my router.
But how can I reach the same result for programs/services that are working INTO the linux box? All I want is that a program (ping, for examples, or a VOIP server, better) uses a secondary routing table in the same machine. In this mode, I can manipulate route settings for different classes of program in my router.
Lo que podés hacer es "marcar" los paquetes mediante iptables -t mangle y luego definir reglas (ip rule) para routear cada paquete de acuerdo a la marca que tenga, por las tablas (ip route) que tengas definidas.
Por ejemplo:
Definís una tabla con su gateway (alguno de tus conexiones), y le ponés las redes que necesitás sean "conocidas" en la tabla:
ip route add 127.0.0.0/8 dev lo scope link table 100 ip route add $NET_INTERNA dev $IF_INTERNA scope link table 100 ip route add $NET_ADSL1 dev $IF_ADSL2 scope link table 100 ip route add $NET_ADSL2 dev $IF_ADSL2 scope link table 100
ip route add default dev $IF_ADSL2 via $GW_ADSL2 table 100
Definís una regla que todo paquete esté marcado con un 1, use esa tabla de routeo (salga por ese gateway...)
ip rule add fwmark 1 table 100
Y también, marcás con un 1 cada paquete que querés que use esa tabla (por ejemplo, el tráfico web):
iptables -t mangle -A PREROUTING -p tcp --dport 80 -j MARK --set-mark 1
Espero te sirva.
Saludos!
Javier.-
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc