Skip to contentSkip to conversation

Hi-Temperature showed in trip points

Processor Renato S. Yamane 2 participants 2 messages Jun 13, 2007 – Jun 16, 2007

lore
Share & tools
lore
#0 lore raw

Hi,
I have a laptop Toshiba M45-S355 (with Intel Pentium M Processor 750 - 1.86GHz) and trip points show me hi-temperature (that is unsupported by this processor):

$ uname -a
Linux mandachuva 2.6.21.1 #1 PREEMPT Sun May 20 22:28:53 BRT 2007 i686 GNU/Linux
$ cat /proc/acpi/thermal_zone/TZCL/trip_points
critical (S5):           105 C

MAX temperature suported by this processor is 100°C (I see this in Intel specifications), so I think that is not very good idea allow temperatures higher than 100°C.

$ cat /proc/acpi/processor/CPU0/info
processor id:            0
acpi id:                 0
bus mastering control:   yes
power management:        yes
throttling control:      yes
limit interface:         yes

Best regards,
Renato S. Yamane

#1 lore raw

Hi!

Quoted 10 lines

I have a laptop Toshiba M45-S355 (with Intel Pentium M Processor 750 - 1.86GHz) and trip points show me hi-temperature (that is unsupported by this processor):

$ uname -a
Linux mandachuva 2.6.21.1 #1 PREEMPT Sun May 20 22:28:53 
BRT 2007 i686 GNU/Linux
$ cat /proc/acpi/thermal_zone/TZCL/trip_points
critical (S5):           105 C

echo right values into trip points to lower this.

Note: Len removed that functionality in 2.6.22.

Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html