Skip to contentSkip to conversation

update checkpatch.pl to version 0.05

PATCH In review Andy Whitcroft 2 participants 3 messages Jun 16, 2007 – Jun 17, 2007 Checkpatch

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 update checkpatch.pl to version 0.05

This version brings a some new tests, and a host of changes to fix false positives, of particular note:

- detect 'var ++;' and 'var --;' as a bad combination
- multistatement #defines are now checked based on statement count
- multistatement #defines with initialisation correctly reported
- checks the location of the inline keywords
- EXPORT_SYMBOL for variables are now understood
- typedefs are loosened to handle sparse etc

This version of checkpatch.pl can be found at the following URL:

http://www.shadowen.org/~apw/public/checkpatch/checkpatch.pl-0.05

Full Changelog:

Andy Whitcroft (18):
Version: 0.05
macro definition checks should be for a single statement avoid assignements only in if conditionals declarations of function pointers need no space multiline macros which are purely initialisation cannot be wrapped EXPORT_SYMBOL can also directly follow a variable definition check on the location of the inline keyword EXPORT_SYMBOL needs to allow for attributes
ensure we do not find C99 // in strings
handle malformed #include lines
accept the {0,} form
typedefs are sensible for defining function pointer parameters ensure { handling correctly handles nested switch() statements trailing whitespace checks are not anchored
typedefs for sparse bitwise annotations make sense update the type matcher to include sparse annotations clean up indent and spacing

---

scripts/checkpatch.pl +129 -54
index aea90d3..56c364c 100755
@@ -9,7 +9,7 @@ use strict;
 my $P = $0;
 $P =~ s@.*/@@g;
 
-my $V = '0.04';
+my $V = '0.05';
 
 use Getopt::Long qw(:config no_auto_abbrev);
 
@@ -17,11 +17,13 @@ my $quiet = 0;
 my $tree = 1;
 my $chk_signoff = 1;
 my $chk_patch = 1;
+my $tst_type = 0;
 GetOptions(
 	'q|quiet'	=> \$quiet,
 	'tree!'		=> \$tree,
 	'signoff!'	=> \$chk_signoff,
 	'patch!'	=> \$chk_patch,
+	'test-type!'	=> \$tst_type,
 ) or exit;
 
 my $exit = 0;
@@ -151,7 +153,7 @@ sub sanitise_line {
 }
 
 sub ctx_block_get {
-	my ($linenr, $remain, $outer) = @_;
+	my ($linenr, $remain, $outer, $open, $close) = @_;
 	my $line;
 	my $start = $linenr - 1;
 	my $blk = '';
@@ -165,8 +167,8 @@ sub ctx_block_get {
 
 		$blk .= $rawlines[$line];
 
-		@o = ($blk =~ /\{/g);
-		@c = ($blk =~ /\}/g);
+		@o = ($blk =~ /$open/g);
+		@c = ($blk =~ /$close/g);
 
 		if (!$outer || (scalar(@o) - scalar(@c)) == 1) {
 			push(@res, $rawlines[$line]);
@@ -180,12 +182,17 @@ sub ctx_block_get {
 sub ctx_block_outer {
 	my ($linenr, $remain) = @_;
 
-	return ctx_block_get($linenr, $remain, 1);
+	return ctx_block_get($linenr, $remain, 1, '\{', '\}');
 }
 sub ctx_block {
 	my ($linenr, $remain) = @_;
 
-	return ctx_block_get($linenr, $remain, 0);
+	return ctx_block_get($linenr, $remain, 0, '\{', '\}');
+}
+sub ctx_statement {
+	my ($linenr, $remain) = @_;
+
+	return ctx_block_get($linenr, $remain, 0, '\(', '\)');
 }
 
 sub ctx_locate_comment {
@@ -264,9 +271,30 @@ sub process {
 	my $in_comment = 0;
 	my $first_line = 0;
 
+	my $ident	= '[A-Za-z\d_]+';
+	my $storage	= '(?:extern|static)';
+	my $sparse	= '(?:__user|__kernel|__force|__iomem)';
+	my $type	= '(?:unsigned\s+)?' .
+			  '(?:void|char|short|int|long|unsigned|float|double|' .
+			  'long\s+long|' .
+			  "struct\\s+${ident}|" .
+			  "union\\s+${ident}|" .
+			  "${ident}_t)" .
+			  "(?:\\s+$sparse)*" .
+			  '(?:\s*\*+)?';
+	my $attribute	= '(?:__read_mostly|__init|__initdata)';
+
+	my $Ident	= $ident;
+	my $Type	= $type;
+	my $Storage	= $storage;
+	my $Declare	= "(?:$storage\\s+)?$type";
+	my $Attribute	= $attribute;
+
 	foreach my $line (@lines) {
 		$linenr++;
 
+		my $rawline = $line;
+
 #extract the filename as it passes
 		if ($line=~/^\+\+\+\s+(\S+)/) {
 			$realfile=$1;
@@ -361,7 +389,7 @@ sub process {
 		next if ($realfile !~ /\.(h|c|s|S|pl|sh)$/);
 
 #trailing whitespace
-		if ($line=~/\+.*\S\s+$/) {
+		if ($line=~/^\+.*\S\s+$/) {
 			my $herevet = "$here\n" . cat_vet($line) . "\n\n";
 			print "trailing whitespace\n";
 			print "$herevet";
@@ -392,17 +420,20 @@ sub process {
 		#
 		next if ($in_comment);
 
-		# Remove comments from the line before processing.
+# Remove comments from the line before processing.
 		$line =~ s@/\*.*\*/@@g;
 		$line =~ s@/\*.*@@;
 		$line =~ s@.*\*/@@;
 
-		#
-		# Checks which may be anchored in the context.
-		#
+# Standardise the strings and chars within the input to simplify matching.
+		$line = sanitise_line($line);
+
+#
+# Checks which may be anchored in the context.
+#
 
-		# Check for switch () and associated case and default
-		# statements should be at the same indent.
+# Check for switch () and associated case and default
+# statements should be at the same indent.
 		if ($line=~/\bswitch\s*\(.*\)/) {
 			my $err = '';
 			my $sep = '';
@@ -428,9 +459,30 @@ sub process {
 #ignore lines not being added
 		if ($line=~/^[^\+]/) {next;}
 
-		#
-		# Checks which are anchored on the added line.
-		#
+# TEST: allow direct testing of the type matcher.
+		if ($tst_type && $line =~ /^.$Declare$/) {
+			print "TEST: is type $Declare\n";
+			print "$herecurr";
+			$clean = 0;
+			next;
+		}
+
+#
+# Checks which are anchored on the added line.
+#
+
+# check for malformed paths in #include statements (uses RAW line)
+		if ($rawline =~ m{^.#\s*include\s+[<"](.*)[">]}) {
+			my $path = $1;
+			if ($path =~ m{//}) {
+				print "malformed #include filename\n";
+				print "$herecurr";
+				$clean = 0;
+			}
+			# Sanitise this special form of string.
+			$path = 'X' x length($path);
+			$line =~ s{\<.*\>}{<$path>};
+		}
 
 # no C99 // comments
 		if ($line =~ m{//}) {
@@ -441,47 +493,44 @@ sub process {
 		# Remove C99 comments.
 		$line =~ s@//.*@@;
 
-		# Standardise the strings and chars within the input
-		# to simplify matching.
-		$line = sanitise_line($line);
-
 #EXPORT_SYMBOL should immediately follow its function closing }.
-		if (($line =~ /EXPORT_SYMBOL.*\(.*\)/) ||
-		    ($line =~ /EXPORT_UNUSED_SYMBOL.*\(.*\)/)) {
+		if (($line =~ /EXPORT_SYMBOL.*\((.*)\)/) ||
+		    ($line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) {
+			my $name = $1;
 			if (($prevline !~ /^}/) &&
 			   ($prevline !~ /^\+}/) &&
-			   ($prevline !~ /^ }/)) {
-				print "EXPORT_SYMBOL(func); should immediately follow its function\n";
+			   ($prevline !~ /^ }/) &&
+			   ($prevline !~ /\s$name(?:\s+$Attribute)?\s*(?:;|=)/)) {
+				print "EXPORT_SYMBOL(foo); should immediately follow its function/variable\n";
 				print "$herecurr";
 				$clean = 0;
 			}
 		}
 
-		# check for static initialisers.
+# check for static initialisers.
 		if ($line=~/\s*static\s.*=\s+(0|NULL);/) {
 			print "do not initialise statics to 0 or NULL\n";
 			print "$herecurr";
 			$clean = 0;
 		}
 
-		# check for new typedefs.
-		if ($line=~/\s*typedef\s/) {
+# check for new typedefs, only function parameters and sparse annotations
+# make sense.
+		if ($line =~ /\btypedef\s/ &&
+		    $line !~ /\btypedef\s+$Type\s+\(\s*$Ident\s*\)\s*\(/ &&
+		    $line !~ /\b__bitwise(?:__|)\b/) {
 			print "do not add new typedefs\n";
 			print "$herecurr";
 			$clean = 0;
 		}
 
 # * goes on variable not on type
-		my $type = '(?:char|short|int|long|unsigned|float|double|' .
-			   'struct\s+[A-Za-z\d_]+|' .
-			   'union\s+[A-Za-z\d_]+)';
-
 		if ($line =~ m{[A-Za-z\d_]+(\*+) [A-Za-z\d_]+}) {
 			print "\"foo$1 bar\" should be \"foo $1bar\"\n";
 			print "$herecurr";
 			$clean = 0;
 		}
-		if ($line =~ m{$type (\*) [A-Za-z\d_]+} ||
+		if ($line =~ m{$Type (\*) [A-Za-z\d_]+} ||
 		    $line =~ m{[A-Za-z\d_]+ (\*\*+) [A-Za-z\d_]+}) {
 			print "\"foo $1 bar\" should be \"foo $1bar\"\n";
 			print "$herecurr";
@@ -530,13 +579,16 @@ sub process {
 			}
 		}
 
-#function brace can't be on same line, except for #defines of do while, or if closed on same line
+# function brace can't be on same line, except for #defines of do while,
+# or if closed on same line
 		if (($line=~/[A-Za-z\d_]+\**\s+\**[A-Za-z\d_]+\(.*\).* {/) and
 		    !($line=~/\#define.*do\s{/) and !($line=~/}/)) {
 			print "braces following function declarations go on the next line\n";
 			print "$herecurr";
 			$clean = 0;
 		}
+
+# Check operator spacing.
 		# Note we expand the line with the leading + as the real
 		# line will be displayed with the leading + and the tabs
 		# will therefore also expand that way.
@@ -544,7 +596,6 @@ sub process {
 		$opline = expand_tabs($opline);
 		$opline =~ s/^./ /;
 		if (!($line=~/\#\s*include/)) {
-			# Check operator spacing.
 			my @elements = split(/(<<=|>>=|<=|>=|==|!=|\+=|-=|\*=|\/=|%=|\^=|\|=|&=|->|<<|>>|<|>|=|!|~|&&|\|\||,|\^|\+\+|--|;|&|\||\+|-|\*|\/\/|\/)/, $opline);
 			my $off = 0;
 			for (my $n = 0; $n < $#elements; $n += 2) {
@@ -572,8 +623,8 @@ sub process {
 				# Pick up the preceeding and succeeding characters.
 				my $ca = substr($opline, $off - 1, 1);
 				my $cc = '';
-				if (length($opline) > ($off + length($elements[$n]))) {
-					$cc = substr($opline, $off + 1 + length($elements[$n]), 1);
+				if (length($opline) >= ($off + length($elements[$n + 1]))) {
+					$cc = substr($opline, $off + length($elements[$n + 1]), 1);
 				}
 
 				my $ctx = "${a}x${c}";
@@ -598,7 +649,7 @@ sub process {
 
 				# , must have a space on the right.
 				} elsif ($op eq ',') {
-					if ($ctx !~ /.xW|.xE/) {
+					if ($ctx !~ /.xW|.xE/ && $cc ne '}') {
 						print "need space after that '$op' $at\n";
 						print "$hereptr";
 						$clean = 0;
@@ -619,11 +670,16 @@ sub process {
 
 				# unary ++ and unary -- are allowed no space on one side.
 				} elsif ($op eq '++' or $op eq '--') {
-					if ($ctx !~ /[WOB]x[^W]|[^W]x[WOB]/) {
+					if ($ctx !~ /[WOB]x[^W]/ && $ctx !~ /[^W]x[WOB]/) {
 						print "need space one side of that '$op' $at\n";
 						print "$hereptr";
 						$clean = 0;
 					}
+					if ($ctx =~ /Wx./ && $cc eq ';') {
+						print "no space before that '$op' $at\n";
+						print "$hereptr";
+						$clean = 0;
+					}
 
 				# & is both unary and binary
 				# unary:
@@ -656,7 +712,7 @@ sub process {
 							print "$hereptr";
 							$clean = 0;
 						}
-					} elsif ($ctx !~ /VxV|[EW]x[WE]|[EWB]x[VO]|OxV|WxB/) {
+					} elsif ($ctx !~ /VxV|[EW]x[WE]|[EWB]x[VO]|OxV|WxB|BxB/) {
 						print "need space before that '$op' $at\n";
 						print "$hereptr";
 						$clean = 0;
@@ -705,9 +761,9 @@ sub process {
 		}
 
 # Check for illegal assignment in if conditional.
-		if ($line=~/\b(if|while)\s*\(.*[^<>!=]=[^=].*\)/) {
+		if ($line=~/\bif\s*\(.*[^<>!=]=[^=].*\)/) {
 			#next if ($line=~/\".*\Q$op\E.*\"/ or $line=~/\'\Q$op\E\'/);
-			print "do not use assignment in condition\n";
+			print "do not use assignment in if condition\n";
 			print "$herecurr";
 			$clean = 0;
 		}
@@ -735,8 +791,8 @@ sub process {
 			$clean = 0;
 		}
 
-#warn if <asm/foo.h> is #included and <linux/foo.h> is available.
-		if ($tree && $line =~ qr|\s*\#\s*include\s*\<asm\/(.*)\.h\>|) {
+#warn if <asm/foo.h> is #included and <linux/foo.h> is available (uses RAW line)
+		if ($tree && $rawline =~ m{^.\#\s*include\s*\<asm\/(.*)\.h\>}) {
 			my $checkfile = "include/linux/$1.h";
 			if (-f $checkfile) {
 				print "Use #include <linux/$1.h> instead of <asm/$1.h>\n";
@@ -745,7 +801,8 @@ sub process {
 			}
 		}
 
-#if/while/etc brace do not go on next line, unless #defining a do while loop, or if that brace on the next line is for something else
+# if/while/etc brace do not go on next line, unless defining a do while loop,
+# or if that brace on the next line is for something else
 		if ($prevline=~/\b(if|while|for|switch)\s*\(/) {
 			my @opened = $prevline=~/\(/g;
 			my @closed = $prevline=~/\)/g;
@@ -767,25 +824,36 @@ sub process {
 			}
 
 			if (($prevline=~/\b(if|while|for|switch)\s*\(.*\)\s*$/) and ($next_line=~/{/) and
-			   !($next_line=~/\b(if|while|for)/) and !($next_line=~/\#define.*do.*while/)) {
+			   !($next_line=~/\b(if|while|for|switch)/) and !($next_line=~/\#define.*do.*while/)) {
 				print "That { should be on the previous line\n";
 				print "$here\n$display_segment\n$next_line\n\n";
 				$clean = 0;
 			}
 		}
 
-#multiline macros should be enclosed in a do while loop
-		if (($prevline=~/\#define.*\\/) and !($prevline=~/do\s+{/) and
-		   !($prevline=~/\(\{/) and ($line=~/;\s*\\/) and
-		   !($line=~/do.*{/) and !($line=~/\(\{/)) {
-			print "Macros with multiple statements should be enclosed in a do - while loop\n";
-			print "$hereprev";
-			$clean = 0;
+# multi-statement macros should be enclosed in a do while loop, grab the
+# first statement and ensure its the whole macro if its not enclosed
+# in a known goot container
+		if (($prevline=~/\#define.*\\/) and
+		   !($prevline=~/do\s+{/) and !($prevline=~/\(\{/) and
+		   !($line=~/do.*{/) and !($line=~/\(\{/) and
+		   !($line=~/^.\s*$Declare\s/)) {
+			# Grab the first statement, if that is the entire macro
+			# its ok.  This may start either on the #define line
+			# or the one below.
+			my $ctx1 = join('', ctx_statement($linenr - 1, $realcnt + 1));
+			my $ctx2 = join('', ctx_statement($linenr, $realcnt));
+
+			if ($ctx1 =~ /\\$/ && $ctx2 =~ /\\$/) {
+				print "Macros with multiple statements should be enclosed in a do - while loop\n";
+				print "$hereprev";
+				$clean = 0;
+			}
 		}
 
-# don't include deprecated include files
+# don't include deprecated include files (uses RAW line)
 		for my $inc (@dep_includes) {
-			if ($line =~ m@\#\s*include\s*\<$inc>@) {
+			if ($rawline =~ m@\#\s*include\s*\<$inc>@) {
 				print "Don't use <$inc>: see Documentation/feature-removal-schedule.txt\n";
 				print "$herecurr";
 				$clean = 0;
@@ -845,6 +913,13 @@ sub process {
 			print "$herecurr";
 			$clean = 0;
 		}
+
+		if ($line =~ /$Type\s+(?:inline|__always_inline)\b/ ||
+		    $line =~ /\b(?:inline|always_inline)\s+$Storage/) {
+			print "inline keyword should sit between storage class and type\n";
+			print "$herecurr";
+			$clean = 0;
+		}
 	}
 
 	if ($chk_patch && !$is_patch) {
#1 lore raw

scripts/checkpatch.pl sub ctx_block_get { · line 185

Quoted 6 lines · Andy Whitcroft
scripts/checkpatch.pl +1 -1
@@ -180,12 +182,17 @@ sub ctx_block_get {
 sub ctx_block_outer {
 	my ($linenr, $remain) = @_;
 
-	return ctx_block_get($linenr, $remain, 1);
+	return ctx_block_get($linenr, $remain, 1, '\{', '\}');

'\\{'.

Or, if it works, directly use

	return &ctx_block_get($linenr, $remain, 1, qr/\{/, qr/\}/);

scripts/checkpatch.pl sub ctx_block_get { · line 195

Quoted 4 lines
scripts/checkpatch.pl +4 -0
+sub ctx_statement {
+	my ($linenr, $remain) = @_;
+
+	return ctx_block_get($linenr, $remain, 0, '\(', '\)');

^^

scripts/checkpatch.pl sub process { · line 274

Quoted 1 line
scripts/checkpatch.pl +1 -0
+	my $ident	= '[A-Za-z\d_]+';

Oh yes, use the qr operator here. (qr{}, qr//, choose anything like you would do with m//)

Quoted 20 lines
scripts/checkpatch.pl +18 -0
+	my $storage	= '(?:extern|static)';
+	my $sparse	= '(?:__user|__kernel|__force|__iomem)';
+	my $type	= '(?:unsigned\s+)?' .
+			  '(?:void|char|short|int|long|unsigned|float|double|' .
+			  'long\s+long|' .
+			  "struct\\s+${ident}|" .
+			  "union\\s+${ident}|" .
+			  "${ident}_t)" .
+			  "(?:\\s+$sparse)*" .
+			  '(?:\s*\*+)?';
+	my $attribute	= '(?:__read_mostly|__init|__initdata)';
+
+	my $Ident	= $ident;
+	my $Type	= $type;
+	my $Storage	= $storage;
+	my $Declare	= "(?:$storage\\s+)?$type";
+	my $Attribute	= $attribute;
+

#trailing whitespace

scripts/checkpatch.pl sub process { · line 392

Quoted 2 lines
scripts/checkpatch.pl +1 -1
-		if ($line=~/\+.*\S\s+$/) {
+		if ($line=~/^\+.*\S\s+$/) {
                if ($line =~ /^\+.*\S\s+$/) {

scripts/checkpatch.pl sub process { · line 425

Quoted 11 lines
			my $herevet = "$here\n" . cat_vet($line) . "\n\n";
			print "trailing whitespace\n";
			print "$herevet";
scripts/checkpatch.pl +1 -1
@@ -392,17 +420,20 @@ sub process {
 		#
 		next if ($in_comment);
 
-		# Remove comments from the line before processing.
+# Remove comments from the line before processing.
 		$line =~ s@/\*.*\*/@@g;
 		$line =~ s@/\*.*@@;

C being a wonderful language, has this nice pitfall for parsers

	foo = number /*pointer_to_int;
Quoted 7 lines
scripts/checkpatch.pl +2 -3
 		$line =~ s@.*\*/@@;
 
-		#
-		# Checks which may be anchored in the context.
-		#
+# Standardise the strings and chars within the input to simplify matching.
+		$line = sanitise_line($line);

scripts/checkpatch.pl sub process { · line 437

Quoted 10 lines
scripts/checkpatch.pl +6 -2
+
+#
+# Checks which may be anchored in the context.
+#
 
-		# Check for switch () and associated case and default
-		# statements should be at the same indent.
+# Check for switch () and associated case and default
+# statements should be at the same indent.
 		if ($line=~/\bswitch\s*\(.*\)/) {

Codingstyle warrants \bswitch\s+ :)

scripts/checkpatch.pl sub process { · line 478

Quoted 5 lines
scripts/checkpatch.pl +0 -4
 # * goes on variable not on type
-		my $type = '(?:char|short|int|long|unsigned|float|double|' .
-			   'struct\s+[A-Za-z\d_]+|' .
-			   'union\s+[A-Za-z\d_]+)';
-

qr. (I don't know what it is good for - compare qr/xyz/ with 'xyz'..., but there's a reason to its existence, so let's use it :-)

Jan

#2 lore raw
Quoted 9 lines · Jan Engelhardt

scripts/checkpatch.pl sub ctx_block_get { · line 185

Quoted 6 lines · Andy Whitcroft
scripts/checkpatch.pl +1 -1
@@ -180,12 +182,17 @@ sub ctx_block_get {
 sub ctx_block_outer {
 	my ($linenr, $remain) = @_;
 
-	return ctx_block_get($linenr, $remain, 1);
+	return ctx_block_get($linenr, $remain, 1, '\{', '\}');

'\\{'.

I want the string to be \{ ... '\}' gives me that:

$ perl
$q = '\}';
print "$q\n";
\}
Quoted 10 lines

Or, if it works, directly use

	return &ctx_block_get($linenr, $remain, 1, qr/\{/, qr/\}/);

scripts/checkpatch.pl sub ctx_block_get { · line 195

Quoted 4 lines
scripts/checkpatch.pl +4 -0
+sub ctx_statement {
+	my ($linenr, $remain) = @_;
+
+	return ctx_block_get($linenr, $remain, 0, '\(', '\)');

^^

Quoted 4 lines

scripts/checkpatch.pl sub process { · line 274

Quoted 1 line
scripts/checkpatch.pl +1 -0
+	my $ident	= '[A-Za-z\d_]+';

Oh yes, use the qr operator here. (qr{}, qr//, choose anything like you would do with m//)

Well I want a combination of variable expanded and not expanded. I think there will be a general cleanup to some standard quoting for the RE's as there are hundreds, and about 7 different quote styles right now.

Quoted 31 lines
Quoted 21 lines
scripts/checkpatch.pl +18 -0
+	my $storage	= '(?:extern|static)';
+	my $sparse	= '(?:__user|__kernel|__force|__iomem)';
+	my $type	= '(?:unsigned\s+)?' .
+			  '(?:void|char|short|int|long|unsigned|float|double|' .
+			  'long\s+long|' .
+			  "struct\\s+${ident}|" .
+			  "union\\s+${ident}|" .
+			  "${ident}_t)" .
+			  "(?:\\s+$sparse)*" .
+			  '(?:\s*\*+)?';
+	my $attribute	= '(?:__read_mostly|__init|__initdata)';
+
+	my $Ident	= $ident;
+	my $Type	= $type;
+	my $Storage	= $storage;
+	my $Declare	= "(?:$storage\\s+)?$type";
+	my $Attribute	= $attribute;
+

#trailing whitespace

scripts/checkpatch.pl sub process { · line 392

Quoted 2 lines
scripts/checkpatch.pl +1 -1
-		if ($line=~/\+.*\S\s+$/) {
+		if ($line=~/^\+.*\S\s+$/) {
                if ($line =~ /^\+.*\S\s+$/) {
Quoted 7 lines
			my $herevet = "$here\n" . cat_vet($line) . "\n\n";
			print "trailing whitespace\n";
			print "$herevet";
scripts/checkpatch.pl +0 -0
@@ -392,17 +420,20 @@ sub process {
 		#
 		next if ($in_comment);
 
Quoted 8 lines

scripts/checkpatch.pl sub process { · line 425

Quoted 4 lines
scripts/checkpatch.pl +1 -1
-		# Remove comments from the line before processing.
+# Remove comments from the line before processing.
 		$line =~ s@/\*.*\*/@@g;
 		$line =~ s@/\*.*@@;

C being a wonderful language, has this nice pitfall for parsers

	foo = number /*pointer_to_int;

Hmm really? Thats not how gcc seems to parse that, it seems to think its a comment. Which makes us safe, as the compiler will trip them up.

$ cat test4.c
int main(int argc, char *argv[])
{
        int _p = 10;
        int *p = &_p;
        int foo = 10 /*p;

        printf("foo=%d\n", foo);
}
$ cc -o test4 test4.c
test4.c:6:15: error: unterminated comment
test4.c: In function 'main':
test4.c:6: error: expected ',' or ';' at end of input
test4.c:6: error: expected declaration or statement at end of input
Quoted 12 lines
Quoted 12 lines
scripts/checkpatch.pl +6 -3
 		$line =~ s@.*\*/@@;
 
-		#
-		# Checks which may be anchored in the context.
-		#
+# Standardise the strings and chars within the input to simplify matching.
+		$line = sanitise_line($line);
+
+#
+# Checks which may be anchored in the context.
+#
 
Quoted 7 lines

scripts/checkpatch.pl sub process { · line 437

Quoted 5 lines
scripts/checkpatch.pl +2 -2
-		# Check for switch () and associated case and default
-		# statements should be at the same indent.
+# Check for switch () and associated case and default
+# statements should be at the same indent.
 		if ($line=~/\bswitch\s*\(.*\)/) {

Codingstyle warrants \bswitch\s+ :)

Yep and we check for that. But here we are trying to catch a switch and case at differing levels, we want to catch that whether they got their spacing right or not.

Quoted 8 lines

scripts/checkpatch.pl sub process { · line 478

Quoted 5 lines
scripts/checkpatch.pl +0 -4
 # * goes on variable not on type
-		my $type = '(?:char|short|int|long|unsigned|float|double|' .
-			   'struct\s+[A-Za-z\d_]+|' .
-			   'union\s+[A-Za-z\d_]+)';
-

qr. (I don't know what it is good for - compare qr/xyz/ with 'xyz'..., but there's a reason to its existence, so let's use it :-)

Well I would tend to say use what works and is easy to understand. The semantics of '' and "" are well known, to change to qr{} I would have to go read the manual to know what it is going to do. That said, _if_ it did have the same semantics as m// then it may wel allow all of these to be expressed as qr{} as it would expand variables but treat \ as if we were in ''. So ... to the manual for me.

-apw