hsm violation
Hi all!
I found the following messages in the kernel log:
---------------------------------
[ 45.288000] set_level status: 0 [ 45.572000] set_level status: 0 [ 45.740000] set_level status: 0 [ 46.820000] set_level status: 0 [ 47.092000] set_level status: 0 [ 61.176000] ata1.00: exception Emask 0x2 SAct 0x2 SErr 0x0 action 0x2 frozen [ 61.176000] ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x2 FIS=005040a1:00000004) [ 61.176000] ata1.00: cmd 60/08:08:37:cc:00/00:00:0c:00:00/40 tag 1 cdb 0x0 data 4096 in [ 61.176000] res 50/00:08:27:3c:ed/00:00:0b:00:00/40 Emask 0x2 (HSM violation) [ 61.488000] ata1: soft resetting port [ 61.660000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 61.660000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808 [ 61.660000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808 [ 61.660000] ata1.00: configured for UDMA/100 [ 61.660000] ata1: EH complete [ 61.660000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) [ 61.660000] sda: Write Protect is off [ 61.660000] sda: Mode Sense: 00 3a 00 00 [ 61.660000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 101.972000] set_level status: 0 [ 102.200000] set_level status: 0 [ 102.404000] set_level status: 0 [ 103.284000] set_level status: 0 [ 103.476000] set_level status: 0 [ 103.912000] set_level status: 0 [ 104.284000] set_level status: 0 [ 104.660000] set_level status: 0 [ 113.576000] set_level status: 0 [ 559.020000] set_level status: 0 [ 559.476000] set_level status: 0 [ 559.632000] set_level status: 0 [ 561.744000] set_level status: 0 [ 563.560000] set_level status: 0 [ 564.224000] set_level status: 0 [ 564.688000] set_level status: 0 [ 567.096000] set_level status: 0 [ 567.712000] set_level status: 0 [ 569.060000] set_level status: 0 [ 569.524000] set_level status: 0 [ 569.828000] set_level status: 0 [ 570.204000] set_level status: 0 [ 570.504000] set_level status: 0 [ 571.724000] set_level status: 0 [ 572.012000] set_level status: 0 [ 572.360000] set_level status: 0 [ 572.696000] set_level status: 0 [ 573.016000] set_level status: 0 [ 574.092000] set_level status: 0 [ 574.348000] set_level status: 0 [ 604.476000] set_level status: 0 [ 604.764000] set_level status: 0 [ 605.048000] set_level status: 0 [ 605.244000] set_level status: 0 [ 605.400000] set_level status: 0 [ 605.540000] set_level status: 0 [ 605.688000] set_level status: 0 [ 606.528000] set_level status: 0 [ 606.820000] set_level status: 0 [ 608.336000] set_level status: 0
----------------------------------------------
This is the result of hdparm -I /dev/sda:
/dev/sda:
ATA device, with non-removable media
Model Number: Hitachi HTS541616J9SA00 Serial Number: SB2461***V3AWE Firmware Revision: SB4OC70P
Standards:
Used: ATA/ATAPI-7 T13 1532D revision 1
Supported: 7 6 5 4
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 312581808
device size with M = 1024*1024: 152627 MBytes
device size with M = 1000*1000: 160041 MBytes (160 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Vendor, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 128 (0x80)
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* IDLE_IMMEDIATE with UNLOAD
* SATA-I signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
Non-Zero buffer offsets in DMA Setup FIS
DMA Setup Auto-Activate optimization Device-initiated interface power management In-order data delivery
* Software settings preservation
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
82min for SECURITY ERASE UNIT.
Checksum: correct
-----------------------------------------------------
I'm using Ubuntu feisty fawn (2.6.20-16-generic) on an Acer Travelmate 6292 (Santa Rosa).
Many thanks!
Enrico
Quoted 63 lines · On Sun, 24 Jun 2007 14:32:22 +0200 Enrico Sardi <[email protected]> wrote:
Hi all!
I found the following messages in the kernel log:
---------------------------------[ 45.288000] set_level status: 0 [ 45.572000] set_level status: 0 [ 45.740000] set_level status: 0 [ 46.820000] set_level status: 0 [ 47.092000] set_level status: 0 [ 61.176000] ata1.00: exception Emask 0x2 SAct 0x2 SErr 0x0 action 0x2 frozen [ 61.176000] ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x2 FIS=005040a1:00000004) [ 61.176000] ata1.00: cmd 60/08:08:37:cc:00/00:00:0c:00:00/40 tag 1 cdb 0x0 data 4096 in [ 61.176000] res 50/00:08:27:3c:ed/00:00:0b:00:00/40 Emask 0x2 (HSM violation) [ 61.488000] ata1: soft resetting port [ 61.660000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 61.660000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808 [ 61.660000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808 [ 61.660000] ata1.00: configured for UDMA/100 [ 61.660000] ata1: EH complete [ 61.660000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) [ 61.660000] sda: Write Protect is off [ 61.660000] sda: Mode Sense: 00 3a 00 00 [ 61.660000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 101.972000] set_level status: 0 [ 102.200000] set_level status: 0 [ 102.404000] set_level status: 0 [ 103.284000] set_level status: 0 [ 103.476000] set_level status: 0 [ 103.912000] set_level status: 0 [ 104.284000] set_level status: 0 [ 104.660000] set_level status: 0 [ 113.576000] set_level status: 0 [ 559.020000] set_level status: 0 [ 559.476000] set_level status: 0 [ 559.632000] set_level status: 0 [ 561.744000] set_level status: 0 [ 563.560000] set_level status: 0 [ 564.224000] set_level status: 0 [ 564.688000] set_level status: 0 [ 567.096000] set_level status: 0 [ 567.712000] set_level status: 0 [ 569.060000] set_level status: 0 [ 569.524000] set_level status: 0 [ 569.828000] set_level status: 0 [ 570.204000] set_level status: 0 [ 570.504000] set_level status: 0 [ 571.724000] set_level status: 0 [ 572.012000] set_level status: 0 [ 572.360000] set_level status: 0 [ 572.696000] set_level status: 0 [ 573.016000] set_level status: 0 [ 574.092000] set_level status: 0 [ 574.348000] set_level status: 0 [ 604.476000] set_level status: 0 [ 604.764000] set_level status: 0
Quoted 9 lines
[ 605.048000] set_level status: 0 [ 605.244000] set_level status: 0 [ 605.400000] set_level status: 0 [ 605.540000] set_level status: 0 [ 605.688000] set_level status: 0 [ 606.528000] set_level status: 0 [ 606.820000] set_level status: 0 [ 608.336000] set_level status: 0
It's not obvious (to me) whether this is a driver bug, a hardware bug, expected-normal-behaviour or what - those diagnostics (which we get to see distressingly frequently) are pretty obscure.
That great spew of "set_level status: 0" is fairly annoying and useless.
Quite a lot has changed since 2.6.20. Are you able to test, say, 2.6.22-rc5?
Quoted 88 lines
This is the result of hdparm -I
/dev/sda:
/dev/sda:ATA device, with non-removable media
Model Number: Hitachi HTS541616J9SA00 Serial Number: SB2461***V3AWE Firmware Revision: SB4OC70P Standards: Used: ATA/ATAPI-7 T13 1532D revision 1 Supported: 7 6 5 4Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 312581808
device size with M = 1024*1024: 152627 MBytes
device size with M = 1000*1000: 160041 MBytes (160 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Vendor, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 128 (0x80)
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
*WRITE_BUFFERcommand
*READ_BUFFERcommand
* NOP cmd
*DOWNLOAD_MICROCODE
* Advanced Power Management feature set
Power-Up In Standby feature set
*SET_FEATURESrequired to spinup after power up
SET_MAXsecurity extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* MandatoryFLUSH_CACHE
*FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
*IDLE_IMMEDIATEwith UNLOAD
* SATA-I signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
Non-Zero buffer offsets in DMA Setup FIS
DMA Setup Auto-Activate optimization Device-initiated interface power management In-order data delivery
* Software settings preservation
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
82min for SECURITY ERASE UNIT.
Checksum: correct-----------------------------------------------------
I'm using Ubuntu feisty fawn (2.6.20-16-generic) on an Acer Travelmate 6292 (Santa Rosa).
Quoted 1 line · Andrew Morton
That great spew of "
set_levelstatus: 0" is fairly annoying and useless.
I don't know where those are coming from. It's not from libata.
Signature · 1 line
tejun
Quoted 6 lines · Enrico Sardi
This is the result of hdparm -I
/dev/sda:
/dev/sda:ATA device, with non-removable media
Model Number: Hitachi HTS541616J9SA00
Just in case, you didn't add "Hitachi " in the front of Model Number string, right? It looks a bit odd because all other HTS541* drives don't have leading "Hitachi " in its Model Number.
Signature · 1 line
tejun
Quoted 7 lines
Quoted 4 lines · Enrico Sardi
This is the result of hdparm -I
/dev/sda:
/dev/sda:
Quoted 9 lines
Quoted 3 lines
ATA device, with non-removable media
Model Number: Hitachi HTS541616J9SA00Just in case, you didn't add "Hitachi " in the front of Model Number string, right? It looks a bit odd because all other HTS541* drives don't have leading "Hitachi " in its Model Number.
Hi!
I didn't add nothing. The model number has the "Hitachi" prefix.
Thanks for the help!
Enrico