Skip to contentSkip to conversation

pivot_root alternative

DISCUSSION Salvatore De Paolis 6 participants 8 messages Jun 24, 2007 – Jun 25, 2007

lore
Share & tools
lore
#0 lore raw

hi all

i built the kernel with a busybox initramfs which runs from a usb stick. While i boot i need to mount the real root and i'm using pivot_root. Pivot_root . old-root return to me an "Invalid argument" error and googling i found here http://lkml.org/lkml/2005/10/8/17 that pivot_root should be avoided. I want to ask now what i should do to switch to a real root?

Regards
S.

#1 lore raw
Quoted 6 lines · Salvatore De Paolis

i built the kernel with a busybox initramfs which runs from a usb stick. While i boot i need to mount the real root and i'm using pivot_root. Pivot_root . old-root return to me an "Invalid argument" error and googling i found here http://lkml.org/lkml/2005/10/8/17 that pivot_root should be avoided. I want to ask now what i should do to switch to a real root?

use run-init from klibc?

Jan

#2 lore raw
Quoted 8 lines · Jan Engelhardt
Quoted 5 lines · Salvatore De Paolis

i built the kernel with a busybox initramfs which runs from a usb stick. While i boot i need to mount the real root and i'm using pivot_root. Pivot_root . old-root return to me an "Invalid argument" error and googling i found here http://lkml.org/lkml/2005/10/8/17 that pivot_root should be avoided. I want to ask now what i should do to switch to a real root?

use run-init from klibc?

However be aware of the limitation of run-init:
It only works for direct childs of root directory
/mnt/newroot won't work
/newroot should work ;-)

Good luck,
Arnd

#3 lore raw
Quoted 9 lines · On Sun, 24 Jun 2007 23:39:25 +0200 Arnd Hannemann <[email protected]> wrote:

use run-init from klibc?

However be aware of the limitation of run-init:
It only works for direct childs of root directory
/mnt/newroot won't work
/newroot should work ;-)

Good luck,
Arnd

Thank you both, i'll take a look at run-init:)
Nice to know about the child limitation but i just have to find klibc-utils inside buildroot or busybox if even exists:)

Regards
S.

#4 lore raw
Quoted 4 lines · Salvatore De Paolis
Quoted 2 lines

use run-init from klibc?

Thank you both, i'll take a look at run-init:)

By the way, busybox now includes similar applet,
named switch_root.

/mjt

#5 lore raw
In reply to Arnd Hannemann
Quoted 7 lines · Arnd Hannemann
Quoted 6 lines · Jan Engelhardt
Quoted 5 lines · Salvatore De Paolis

i built the kernel with a busybox initramfs which runs from a usb stick. While i boot i need to mount the real root and i'm using pivot_root. Pivot_root . old-root return to me an "Invalid argument" error and googling i found here http://lkml.org/lkml/2005/10/8/17 that pivot_root should be avoided. I want to ask now what i should do to switch to a real root?

Quoted 7 lines
Quoted 1 line

use run-init from klibc?

However be aware of the limitation of run-init:
It only works for direct childs of root directory
/mnt/newroot won't work
/newroot should work ;-)

Hm, that should probably be fixed. It should be able to work on any directory as long as there isn't another *filesystem* involved...

-hpa

#6 lore raw
In reply to Salvatore De Paolis
Quoted 1 line · Salvatore De Paolis

i built the kernel with a busybox initramfs which runs from a usb stick. While i boot i need to mount the real root and i'm using pivot_root. Pivot_root . old-root return to me an "Invalid argument" error and googling i found here http://lkml.org/lkml/2005/10/8/17 that pivot_root should be avoided. I want to ask now what i should do to switch to a real root?

One interesting fact about the mount() syscall is this: when overmounting a directory tree, a process whose current working directory is within said directory tree will see the old vfsmounts until it does an absolute chdir(). Shells tend not to be terribly useful for this because they use absolute paths more than necessary, but I think you can make it work. For instance, if you run these commands after mounting the root filesystem:

mount -t proc proc /realroot/proc
cd /
mount --move /realroot /

find /proc/$$/cwd/ -mindepth 1 -maxdepth 1 -print0 \
		| xargs -0 rm -rf -- '{}' ';'

cd /

This will set up proc on the new root filesystem, move /realroot to the root directory, and delete the contents of the old initramfs using the old current-working-directory link of your shell. The amusing thing is that you are using the "find" and "rm" commands from the newly mounted root filesystem to remove the contents of the completely hidden initramfs. The only reason it's actually possible is because you have the tenuous thread of the working directory.

Cheers,
Kyle Moffett

#7 lore raw

So i choice to use switch_root which is already inside the busybox but with a bit(?) of unluck cause it still wont run.

It hangs on !S_ISREG(st1.st_mode)

Can you explain to me how to interpret it?

Regards
S.