pm2fb: mtrr support and noaccel option
PATCH 1/1 pm2fb: mtrr support and noaccel option
From: Krzysztof Helt <[email protected]>
This patch adds usage of MTRR registers and two new options:
noaccel and nomtrr.
---
The previous patch does not applied if the mm patches were applied. This one fixes it.
--- linux-2.6.21/drivers/video/pm2fb.c 2007-06-21
08:32:07.000000000 +0200
+++ linux-2.6.22/drivers/video/pm2fb.c 2007-06-21
08:30:09.000000000 +0200
@@ -38,6 +38,9 @@
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/pci.h>
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
#include <video/permedia2.h>
#include <video/cvisionppc.h>
@@ -71,8 +74,13 @@ static char *mode __devinitdata = NULL;
* these flags allow the user to specify that requests for +ve sync
* should be silently turned in -ve sync.
*/
-static int lowhsync;
-static int lowvsync;
+static int lowhsync __devinitdata;
+static int lowvsync __devinitdata;
+static int noaccel __devinitdata;
+/* mtrr option */
+#ifdef CONFIG_MTRR
+static int nomtrr __devinitdata;
+#endif
/*
* The hardware state of the graphics card that isn't part of the
@@ -88,6 +96,7 @@ struct pm2fb_par
u32 mem_control; /* MemControl reg at probe */
u32 boot_address; /* BootAddress reg at probe */
u32 palette[16];
+ int mtrr_handle;
};
/*
@@ -1316,6 +1325,15 @@ static int __devinit pm2fb_probe(struct
goto err_exit_mmio;
}
+#ifdef CONFIG_MTRR
+ default_par->mtrr_handle = -1;
+ if (!nomtrr)
+ default_par->mtrr_handle =
+ mtrr_add(pm2fb_fix.smem_start,
+ pm2fb_fix.smem_len,
+ MTRR_TYPE_WRCOMB, 1);
+#endif
+
info->fbops = &pm2fb_ops;
info->fix = pm2fb_fix;
info->pseudo_palette = default_par->palette;
@@ -1324,6 +1342,11 @@ static int __devinit pm2fb_probe(struct
FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT;
+ if (noaccel) {
+ printk(KERN_DEBUG "disabling acceleration\n");
+ info->flags |= FBINFO_HWACCEL_DISABLED;
+ }
+
if (!mode)
mode = "640x480@60";
@@ -1375,6 +1398,11 @@ static void __devexit pm2fb_remove(struc
unregister_framebuffer(info);
+#ifdef CONFIG_MTRR
+ if (par->mtrr_handle >= 0)
+ mtrr_del(par->mtrr_handle, info->fix.smem_start,
+ info->fix.smem_len);
+#endif /* CONFIG_MTRR */
iounmap(info->screen_base); release_mem_region(fix->smem_start, fix->smem_len); iounmap(par->v_regs);
@@ -1430,6 +1458,12 @@ static int __init pm2fb_setup(char *opti
lowhsync = 1;
} else if(!strcmp(this_opt, "lowvsync")) {
lowvsync = 1;
+#ifdef CONFIG_MTRR
+ } else if (!strncmp(this_opt, "nomtrr", 6)) {
+ nomtrr = 1;
+#endif
+ } else if (!strncmp(this_opt, "noaccel", 7)) {
+ noaccel = 1;
} else {
mode = this_opt;
}
@@ -1474,6 +1508,12 @@ module_param(lowhsync, bool, 0);
MODULE_PARM_DESC(lowhsync, "Force horizontal sync low regardless
of mode");
module_param(lowvsync, bool, 0); MODULE_PARM_DESC(lowvsync, "Force vertical sync low regardless
of mode");
+module_param(noaccel, bool, 0); +MODULE_PARM_DESC(noaccel, "Disable acceleration"); +#ifdef CONFIG_MTRR
+module_param(nomtrr, bool, 0); +MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)");
+#endif
MODULE_AUTHOR("Jim Hague <[email protected]>"); MODULE_DESCRIPTION("Permedia2 framebuffer device driver");
----------------------------------------------------
Wrocław Non Stop - eksplozja kultury we Wrocławiu!
22 czerwca - 1 lipca 2007.
W ramach festiwalu wystąpią m.in. Iggy Pop & The Stooges!
wwW.wroclawnonstop.pl http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Figgypop.html&sid=1194
From: Krzysztof Helt <[email protected]>
This patch adds usage of MTRR registers and two new options: noaccel and nomtrr.
---
drivers/video/pm2fb.c +42 -2
@@ -38,6 +38,9 @@#include <linux/fb.h> #include <linux/init.h> #include <linux/pci.h> +#ifdef CONFIG_MTRR +#include <asm/mtrr.h> +#endif #include <video/permedia2.h> #include <video/cvisionppc.h>
@@ -71,8 +74,13 @@ static char *mode __devinitdata = NULL;* these flags allow the user to specify that requests for +ve sync * should be silently turned in -ve sync. */ -static int lowhsync; -static int lowvsync; +static int lowhsync__devinitdata ; +static int lowvsync__devinitdata ; +static int noaccel__devinitdata ; +/* mtrr option */ +#ifdef CONFIG_MTRR +static int nomtrr__devinitdata ; +#endif /* * The hardware state of the graphics card that isn't part of the
@@ -88,6 +96,7 @@ struct pm2fb_paru32 mem_control;/* MemControl reg at probe */ u32 boot_address;/* BootAddress reg at probe */ u32 palette[16 ]; +int mtrr_handle; };/*
@@ -1316,6 +1325,15 @@ static int __devinit pm2fb_probe(struct goto err_exit_mmio; } +#ifdef CONFIG_MTRR + default_par->mtrr_handle =-1 ; +if (!nomtrr) + default_par->mtrr_handle = +mtrr_add (pm2fb_fix.smem_start, + pm2fb_fix.smem_len, +MTRR_TYPE_WRCOMB ,1 ); +#endif + info->fbops = &pm2fb_ops; info->fix = pm2fb_fix; info->pseudo_palette = default_par->palette;
@@ -1324,6 +1342,11 @@ static int __devinit pm2fb_probe(structFBINFO_HWACCEL_COPYAREA |FBINFO_HWACCEL_FILLRECT ; +if (noaccel) { +printk (KERN_DEBUG "disabling acceleration\n" ); + info->flags |=FBINFO_HWACCEL_DISABLED ; + } +if (!mode) mode ="640x480@60" ;
@@ -1375,6 +1398,11 @@ static void __devexit pm2fb_remove(strucunregister_framebuffer (info); +#ifdef CONFIG_MTRR +if (par->mtrr_handle >=0 ) +mtrr_del (par->mtrr_handle, info->fix.smem_start, + info->fix.smem_len); +#endif /* CONFIG_MTRR */ iounmap (info->screen_base);release_mem_region (fix->smem_start, fix->smem_len);iounmap (par->v_regs);
@@ -1430,6 +1458,12 @@ static int __init pm2fb_setup(char *opti lowhsync =1 ; }else if (!strcmp (this_opt,"lowvsync" )) { lowvsync =1 ; +#ifdef CONFIG_MTRR + }else if (!strncmp (this_opt,"nomtrr" ,6 )) { + nomtrr =1 ; +#endif + }else if (!strncmp (this_opt,"noaccel" ,7 )) { + noaccel =1 ; }else { mode = this_opt; }
@@ -1474,6 +1508,12 @@ module_param(lowhsync, bool, 0);MODULE_PARM_DESC (lowhsync,"Force horizontal sync low regardless of mode" );module_param (lowvsync, bool,0 );MODULE_PARM_DESC (lowvsync,"Force vertical sync low regardless of mode" ); +module_param (noaccel, bool,0 ); +MODULE_PARM_DESC (noaccel,"Disable acceleration" ); +#ifdef CONFIG_MTRR +module_param (nomtrr, bool,0 ); +MODULE_PARM_DESC (nomtrr,"Disable MTRR support (0 or 1=disabled) (default=0)" ); +#endif MODULE_AUTHOR ("Jim Hague <[email protected]>" );MODULE_DESCRIPTION ("Permedia2 framebuffer device driver" );
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Linux-fbdev-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel