HTB and ATM patch
Quoted 8 lines · Edouard Thuleau
Hi all,
I patch my kernel (2.6.17) and my tc (iproute2-2.6.18-061002) utilitie for an accurate packet scheduling on an ATM link.
I configure my HTB hierarchy on the upload of the link and try with differents flows.It works correctly but in some of case I lose about 50% of my bandwith.
That's what dsl/atm is like for some packet sizes, eg. an empty windows ack = 40 byte IP packet, but 2 ATM cells = 106 bytes on the wire.
Quoted 3 lines
I use the overhead (42) configuration for my link (PPPoE, VC/LLC) indicate in the documentation.
My question is, how this hoverhead value is calculate ?
http://ace-host.stuart.id.au/russell/files/tc/tc-atm/
Quoted 4 lines
I try to separate the streams with the lentgh of the packet in differents classes and put a specific overhead for each one, but I don't know how calculate it. Do you think it's a good solution ?
You don't need a different overhead just 42 for all classes (assuming you are shaping on the ppp device - you can take 14 from the 42 if the ppp terminates elsewhere any you are shaping on eth)
Quoted 5 lines
Is it necessary to put the atm, nohyst options and configure the overhead
for the mother class ?
I would put overhead 42 atm nohyst after every rate - so yes.
Andy.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc