Skip to contentSkip to conversation

bug concering Solaris ?

DISCUSSION Adrian Lambeck 2 participants 2 messages Jul 8, 2007 1 message not in the archive KVM

lore
Share & tools
lore

Adrian Lambeck

author
#0 lore raw

I have question concerning solaris as a guest system. Windows XP and Linux are up and running without problems.
Now I would like to us Solaris10 for x86 too. I downloaded the ISO image and validated the MD5 checksum but when I start QEMU with "boot d" and -cdrom="location of the DVD image", QEMU dies with the following exception right after trying to access the cdrom drive:

exception 6 (0)
rax 0000000000180000 rbx 0000000000008d06 rcx 00000000f000ff53 rdx 0000000000000000
rsi 0000000000000000 rdi 0000000000000000 rsp 000000000005087e rbp 0000000000000000
r8 0000000000000000 r9 0000000000000000 r10 0000000000000000 r11 0000000000000000
r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15 0000000000000000
rip 0000000000000003 rflags 00233002
cs 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) ds 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) es 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) ss 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) fs 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) gs 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) tr 0028 (20850000/00002088 p 1 dpl 0 db 0 s 0 type b l 0 g 0 avl 0) ldt 0000 (00000000/0000ffff p 1 dpl 0 db 0 s 0 type 2 l 0 g 0 avl 0) gdt 8548/40
idt 1693b8/7ff
cr0 60000010 cr2 0 cr3 189000 cr4 90 cr8 0 efer 0
code: f0 d0 8b 00 00 53 ff 00 f0 53 ff 00 f0 53 ff 00 f0 53 ff 00 f0 53 ff 00 f0 53 ff 00 f0 a5
qemu exited: vdeq quits

Are there any ideas how this issue can be resolved?
I tried the same setup with the official qemu-0.9 which worked without problems.

Regards,
Adrian Lambeck

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/

A message that is not in the archive (sent off-list or not yet received): 4690CED0.9090100-xXM4Y/[email protected]

#2 lore raw
Quoted 33 lines · Adrian Lambeck

I have question concerning solaris as a guest system. Windows XP and Linux are up and running without problems.
Now I would like to us Solaris10 for x86 too. I downloaded the ISO image and validated the MD5 checksum but when I start QEMU with "boot d" and -cdrom="location of the DVD image", QEMU dies with the following exception right after trying to access the cdrom drive:

exception 6 (0)
rax 0000000000180000 rbx 0000000000008d06 rcx 00000000f000ff53 rdx 0000000000000000
rsi 0000000000000000 rdi 0000000000000000 rsp 000000000005087e rbp 0000000000000000
r8 0000000000000000 r9 0000000000000000 r10 0000000000000000 r11 0000000000000000
r12 0000000000000000 r13 0000000000000000 r14 0000000000000000 r15 0000000000000000
rip 0000000000000003 rflags 00233002
cs 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) ds 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) es 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) ss 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) fs 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) gs 0000 (00000000/0000ffff p 1 dpl 3 db 0 s 1 type 3 l 0 g 0 avl 0) tr 0028 (20850000/00002088 p 1 dpl 0 db 0 s 0 type b l 0 g 0 avl 0) ldt 0000 (00000000/0000ffff p 1 dpl 0 db 0 s 0 type 2 l 0 g 0 avl 0) gdt 8548/40
idt 1693b8/7ff
cr0 60000010 cr2 0 cr3 189000 cr4 90 cr8 0 efer 0
code: f0 d0 8b 00 00 53 ff 00 f0 53 ff 00 f0 53 ff 00 f0 53 ff 00 f0 53 ff 00 f0 53 ff 00 f0 a5
qemu exited: vdeq quits

Quoted 4 lines

Are there any ideas how this issue can be resolved?
I tried the same setup with the official qemu-0.9 which worked without problems.

This looks like the real mode problem (see
http://kvm.qumranet.com/kvmwiki/Intel_Real_Mode_Emulation_Problems) (are you on an Intel cpu?), although the symptoms aren't exactly the usual ones.

I suggest installing with -no-kvm, and then booting the newly installed guest with kvm.

Signature · 8 lines
error compiling committee.c: too many arguments to function


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/