Skip to contentSkip to conversation

sata_inic162x issue - PCMCIA card

DISCUSSION jm_928 3 participants 3 messages Jul 14, 2007 libata

lore
Share & tools
lore

jm_928

author
#0 lore raw

Hi,

I have an esata PCMCIA card based on the Initio 1620 chipset. When inserting this into my Dell D600 laptop (running Ubuntu 7.04 with the 2.6.20-16 kernel) I get the following error messages:

[   27.660000] sata_inic162x 0000:03:00.0: version 0.1
[   27.660000] PCI: Enabling device 0000:03:00.0 (0000 -> 0003)
[   27.660000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKD] -> GSI 11
(level, low) -> IRQ 11
[   27.660000] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[   27.660000] sata_inic162x: probe of 0000:03:00.0 failed with error -22

Does anyone have any hints on what this message (particularly error -22) means?

Thanks.
JM

Signature · 2 lines
View this message in context: http://www.nabble.com/sata_inic162x-issue---PCMCIA-card-tf4079060.html#a11593734
Sent from the linux-ide mailing list archive at Nabble.com.
#1 lore raw
Quoted 13 lines · jm_928 wrote:

Hi,

I have an esata PCMCIA card based on the Initio 1620 chipset. When inserting this into my Dell D600 laptop (running Ubuntu 7.04 with the 2.6.20-16 kernel) I get the following error messages:

[   27.660000] sata_inic162x 0000:03:00.0: version 0.1
[   27.660000] PCI: Enabling device 0000:03:00.0 (0000 -> 0003)
[   27.660000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKD] -> GSI 11
(level, low) -> IRQ 11
[   27.660000] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[   27.660000] sata_inic162x: probe of 0000:03:00.0 failed with error -22
Quoted 2 lines

Does anyone have any hints on what this message (particularly error -22) means?

-EINVAL

Maybe it's an interrupt problem, like the previous message indicates.

Jeff

#2 lore raw
In reply to jm_928
Quoted 13 lines · jm_928 wrote:

Hi,

I have an esata PCMCIA card based on the Initio 1620 chipset. When inserting this into my Dell D600 laptop (running Ubuntu 7.04 with the 2.6.20-16 kernel) I get the following error messages:

[   27.660000] sata_inic162x 0000:03:00.0: version 0.1
[   27.660000] PCI: Enabling device 0000:03:00.0 (0000 -> 0003)
[   27.660000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKD] -> GSI 11
(level, low) -> IRQ 11
[   27.660000] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[   27.660000] sata_inic162x: probe of 0000:03:00.0 failed with error -22
Quoted 2 lines

Does anyone have any hints on what this message (particularly error -22) means?

-22 means "-EINVAL". So to debug this, start searching the relevant kernel source code (try the Ubuntu sata_inic162x driver source for starters) for that value (EINVAL).

-ml