aacraid 2.6.21+ partition table disappear
Subsystems (2)
Hi all,
I had been last 2 Day in China trying update a Linux (Debian Sarge) running a 2.6.14.3 to 2.6.21.6 or 2.6.22.1
The boot stuck in a VFS Kernel Panic no root filesystem found.
1) aacraid compiled into kernel - failed
2) as module + initrd - failed
the initrd show that the sda with 200GB was found - driver sd but no partition was found.
Sorry I could not get a serial cable to cover the boot log - and it's impossible to get one if you can't speak Mandarin.
Do you have any hint what I could do?
Thank you
Chris
Controller is
0000:02:08.0 RAID bus controller: Adaptec AAC-RAID (rev 01)
Subsystem: Adaptec 2120S (Crusader)
kerneloutput """ 2.6.14.3 """
Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... Adaptec aacraid driver (1.1-4 Jan 28 2006 18:35:59)
AAC0: kernel 4.2-0[8205]
AAC0: monitor 4.2-0[8205]
AAC0: bios 4.2-0[8205]
AAC0: serial c49a76
AAC0: Non-DASD support enabled.
scsi0 : aacraid
Vendor: ADAPTEC Model: XITArray1 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03
3ware 9000 Storage Controller device driver for Linux v2.26.02.004. SCSI device sda: 429920256 512-byte hdwr sectors (220119 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: got wrong page
sda: assuming drive cache: write through
SCSI device sda: 429920256 512-byte hdwr sectors (220119 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: got wrong page
sda: assuming drive cache: write through
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
Signature · 7 lines
X-IT Management Ltd. Office A, 14/F, Wing Sing Commercial Bldg. 12 Wing Lok Street, Sheung Wan Hong Kong 3596 7575 PHONE 3585 5118 FAX
The problem description matches this patch (which showed up on 2007/04/13).
Sincerely -- Mark Salyzyn
Quoted 58 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Chris Ruehl
Sent: Wednesday, July 18, 2007 5:48 AM
To: Linux-scsi vger.kernel.org
Subject: aacraid 2.6.21+ partition table disappearHi all,
I had been last 2 Day in China trying update a Linux (Debian Sarge) running a 2.6.14.3 to 2.6.21.6 or 2.6.22.1
The boot stuck in a VFS Kernel Panic no root filesystem found.
1) aacraid compiled into kernel - failed
2) as module + initrd - failedthe initrd show that the sda with 200GB was found - driver sd but no partition was found.
Sorry I could not get a serial cable to cover the boot log - and it's impossible
to get one if you can't speak Mandarin.Do you have any hint what I could do?
Thank you
ChrisController is
0000:02:08.0 RAID bus controller: Adaptec AAC-RAID (rev 01)
Subsystem: Adaptec 2120S (Crusader)kerneloutput """ 2.6.14.3 """
Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... Adaptec aacraid driver (1.1-4 Jan 28 2006 18:35:59)
AAC0: kernel 4.2-0[8205]
AAC0: monitor 4.2-0[8205]
AAC0: bios 4.2-0[8205]
AAC0: serial c49a76
AAC0: Non-DASD support enabled.
scsi0 : aacraidVendor: ADAPTEC Model: XITArray1 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03
Quoted 29 lines
3ware 9000 Storage Controller device driver for Linux v2.26.02.004. SCSI device sda: 429920256 512-byte hdwr sectors (220119 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: got wrong page
sda: assuming drive cache: write through
SCSI device sda: 429920256 512-byte hdwr sectors (220119 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: got wrong page
sda: assuming drive cache: write through
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >Signature · 13 lines
X-IT Management Ltd. Office A, 14/F, Wing Sing Commercial Bldg. 12 Wing Lok Street, Sheung Wan Hong Kong 3596 7575 PHONE 3585 5118 FAX - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
drivers/scsi/aacraid/aachba.c +1 -2
@@ -503,8 +503,7 @@ dresp = (struct aac_mount *)fib_data (fibptr); dresp->mnt[0 ].capacityhigh =0 ;if ((le32_to_cpu (dresp->status) !=ST_OK ) || - ((le32_to_cpu (dresp->mnt[0 ].vol) !=CT_NONE ) && - (le32_to_cpu (dresp->mnt[0 ].state) ==FSCS_HIDDEN ))) + (le32_to_cpu (dresp->mnt[0 ].vol) !=CT_NONE ))return _aac_probe_container2 (context, fibptr); scsicmd = (struct scsi_cmnd *) context; scsicmd->SCp.phase =AAC_OWNER_MIDLEVEL ;
Hi Mark,
the 2.6.22.1 already inherits your patch but still could not boot. The patch you send remove the 'FSCS_HIDDEN' check.
I found one more check in line 480 of aachba.c (2.6.22.1) my this cause the problem?
461
462 static int _aac_probe_container2(void * context, struct fib *
fibptr)
463 {
... 478 if ((le32_to_cpu(dresp->status) == ST_OK) &&
479 (le32_to_cpu(dresp->mnt[0].vol) != CT_NONE) &&
480 (le32_to_cpu(dresp->mnt[0].state) !=FSCS_HIDDEN)) {
481 fsa_dev_ptr->valid = 1;
I search/read the thread from 2007/04/13 and the difference the AACRAID in this thread is "rev 02" ours "rev 01".
thank you
Chris
Quoted 91 lines · Mark
The problem description matches this patch (which showed up on 2007/04/13).
Sincerely -- Mark Salyzyn
Quoted 85 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Chris Ruehl
Sent: Wednesday, July 18, 2007 5:48 AM
To: Linux-scsi vger.kernel.org
Subject: aacraid 2.6.21+ partition table disappearHi all,
I had been last 2 Day in China trying update a Linux (Debian Sarge) running a 2.6.14.3 to 2.6.21.6 or 2.6.22.1
The boot stuck in a VFS Kernel Panic no root filesystem found.
1) aacraid compiled into kernel - failed
2) as module + initrd - failedthe initrd show that the sda with 200GB was found - driver sd but no partition was found.
Sorry I could not get a serial cable to cover the boot log - and it's impossible to get one if you can't speak Mandarin.
Do you have any hint what I could do?
Thank you
ChrisController is
0000:02:08.0 RAID bus controller: Adaptec AAC-RAID (rev 01)
Subsystem: Adaptec 2120S (Crusader)kerneloutput """ 2.6.14.3 """
Loading Adaptec I2O RAID: Version 2.4 Build 5go Detecting Adaptec I2O RAID controllers... Adaptec aacraid driver (1.1-4 Jan 28 2006 18:35:59)
AAC0: kernel 4.2-0[8205]
AAC0: monitor 4.2-0[8205]
AAC0: bios 4.2-0[8205]
AAC0: serial c49a76
AAC0: Non-DASD support enabled.
scsi0 : aacraidVendor: ADAPTEC Model: XITArray1 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 03 Vendor: SEAGATE Model: ST373207LC Rev: D701 Type: Direct-Access ANSI SCSI revision: 033ware 9000 Storage Controller device driver for Linux v2.26.02.004. SCSI device sda: 429920256 512-byte hdwr sectors (220119 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: got wrong page
sda: assuming drive cache: write through
SCSI device sda: 429920256 512-byte hdwr sectors (220119 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: got wrong page
sda: assuming drive cache: write through
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >Signature · 12 lines
X-IT Management Ltd. Office A, 14/F, Wing Sing Commercial Bldg. 12 Wing Lok Street, Sheung Wan Hong Kong 3596 7575 PHONE 3585 5118 FAX - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 7 lines
X-IT Management Ltd. Office A, 14/F, Wing Sing Commercial Bldg. 12 Wing Lok Street, Sheung Wan Hong Kong 3596 7575 PHONE 3585 5118 FAX