From 01d4866fac9f87bb9e3927ad80704ac3dd240576 Mon Sep 17 00:00:00 2001
From: Riku Voipio <nchip@watergate-2.(none)>
Date: Fri, 29 Jun 2007 01:21:03 +0300
Subject: [PATCH] Add f75375s driver

Signed-off-by Riku Voipio <[email protected]>

---
 drivers/hwmon/Kconfig   |   10 +
 drivers/hwmon/Makefile  |    1 +
 drivers/hwmon/f75375s.c |  683 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 694 insertions(+), 0 deletions(-)
 create mode 100644 drivers/hwmon/f75375s.c

drivers/hwmon/Kconfig +10 -0

index 13eea47..9138604 100644
@@ -199,6 +199,16 @@ config SENSORS_F71805F
 	  This driver can also be built as a module.  If so, the module
 	  will be called f71805f.
 
+config SENSORS_F75375S
+	tristate "Fintek F75375S/SP and F75373";
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for hardware monitoring
+	  features of the Fintek F75375S/SP and F75373
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called f75375s.
+
 config SENSORS_FSCHER
 	tristate "FSC Hermes"
 	depends on I2C

drivers/hwmon/Makefile +1 -0

index cfaf338..689131a 100644
@@ -27,6 +27,7 @@ obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
 obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
 obj-$(CONFIG_SENSORS_F71805F)	+= f71805f.o
+obj-$(CONFIG_SENSORS_F75375S)	+= f75375s.o
 obj-$(CONFIG_SENSORS_FSCHER)	+= fscher.o
 obj-$(CONFIG_SENSORS_FSCPOS)	+= fscpos.o
 obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o

drivers/hwmon/f75375s.c new file +683 -0

683 lines not on this page · raw message

Signature · 1 line

1.5.2.3

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors