85xxCDS: MPC8548 DTS cleanup.
Subsystems (2)
PATCH 6/6 85xxCDS: MPC8548 DTS cleanup.
Quoted 1 line
From
5d2f1e916b0a88538370f93e8c58691ba3a57d92Mon Sep 17 00:00:00 2001
From: Randy Vinson <[email protected]>
Date: Tue, 17 Jul 2007 16:37:12 -0700
Subject: [PATCH] 85xxCDS: MPC8548 DTS cleanup.
Added the P2P bridge present on the Arcadia base board and moved the VIA Southbridge behind the bridge to reflect its actual position in the bus organization. Added the RTC that's in the VIA Southbridge and expanded the ranges array for the SOC node to allow proper address translation of the RTC registers.
Signed-off-by Randy Vinson <[email protected]>
--- arch/powerpc/boot/dts/mpc8548cds.dts | 120 ++++++++++++++++++++++++--------- 1 files changed, 87 insertions(+), 33 deletions(-)
arch/powerpc/boot/dts/mpc8548cds.dts +87 -33
@@ -44,8 +44,14 @@ #size-cells = <1>; #interrupt-cells = <2>; device_type = "soc"; - ranges = <0 e0000000 00100000>; - reg = <e0000000 00100000>; // CCSRBAR 1M + ranges = <00001000 e0001000 000ff000 + 80000000 80000000 10000000 + e2000000 e2000000 00800000 + 90000000 90000000 10000000 + e2800000 e2800000 00800000 + a0000000 a0000000 20000000 + e3000000 e3000000 01000000>; + reg = <e0000000 00001000>; // CCSRBAR bus-frequency = <0>; memory-controller@2000 {
@@ -183,8 +189,8 @@ fsl,has-rstcr; }; - pci1: pci@8000 { - interrupt-map-mask = <1f800 0 0 7>; + pci@8000 { + interrupt-map-mask = <f800 0 0 7>; interrupt-map = < /* IDSEL 0x4 (PCIX Slot 2) */ 02000 0 0 1 &mpic 0 1
@@ -244,19 +250,7 @@ 0E000 0 0 1 &mpic 0 1 0E000 0 0 2 &mpic 1 1 0E000 0 0 3 &mpic 2 1 - 0E000 0 0 4 &mpic 3 1 - - /* bus 1 , idsel 0x2 Tsi310 bridge secondary */ - 11000 0 0 1 &mpic 2 1 - 11000 0 0 2 &mpic 3 1 - 11000 0 0 3 &mpic 0 1 - 11000 0 0 4 &mpic 1 1 - - /* VIA chip */ - 12000 0 0 1 &mpic 0 1 - 12000 0 0 2 &mpic 1 1 - 12000 0 0 3 &mpic 2 1 - 12000 0 0 4 &mpic 3 1>; + 0E000 0 0 4 &mpic 3 1>; interrupt-parent = <&mpic>; interrupts = <18 2>;
@@ -271,18 +265,78 @@ compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; device_type = "pci"; - i8259@4 { - clock-frequency = <0>; - interrupt-controller; - device_type = "interrupt-controller"; - reg = <12000 0 0 0 1>; - #address-cells = <0>; - #interrupt-cells = <2>; - built-in; - compatible = "chrp,iic"; - big-endian; - interrupts = <1>; - interrupt-parent = <&pci1>; + pci_bridge@1c { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x00 (PrPMC Site) */ + 0000 0 0 1 &mpic 0 1 + 0000 0 0 2 &mpic 1 1 + 0000 0 0 3 &mpic 2 1 + 0000 0 0 4 &mpic 3 1 + + /* IDSEL 0x04 (VIA chip) */ + 2000 0 0 1 &mpic 0 1 + 2000 0 0 2 &mpic 1 1 + 2000 0 0 3 &mpic 2 1 + 2000 0 0 4 &mpic 3 1 + + /* IDSEL 0x05 (8139) */ + 2800 0 0 1 &mpic 1 1 + + /* IDSEL 0x06 (Slot 6) */ + 3000 0 0 1 &mpic 2 1 + 3000 0 0 2 &mpic 3 1 + 3000 0 0 3 &mpic 0 1 + 3000 0 0 4 &mpic 1 1 + + /* IDESL 0x07 (Slot 7) */ + 3800 0 0 1 &mpic 3 1 + 3800 0 0 2 &mpic 0 1 + 3800 0 0 3 &mpic 1 1 + 3800 0 0 4 &mpic 2 1>; + + reg = <e000 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <02000000 0 80000000 + 02000000 0 80000000 + 0 20000000 + 01000000 0 00000000 + 01000000 0 00000000 + 0 00080000>; + clock-frequency = <1fca055>; + + isa@4 { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <2000 0 0 0 0>; + ranges = <1 0 01000000 0 0 00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + reg = <1 20 2 + 1 a0 2 + 1 4d0 2>; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + interrupts = <0 1>; + interrupt-parent = <&mpic>; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <1 70 2>; + }; + }; }; };
@@ -292,9 +346,9 @@ /* IDSEL 0x15 */ a800 0 0 1 &mpic b 1 - a800 0 0 2 &mpic b 1 - a800 0 0 3 &mpic b 1 - a800 0 0 4 &mpic b 1>; + a800 0 0 2 &mpic 1 1 + a800 0 0 3 &mpic 2 1 + a800 0 0 4 &mpic 3 1>; interrupt-parent = <&mpic>; interrupts = <19 2>;
@@ -310,7 +364,7 @@ device_type = "pci"; }; /* PCI Express */ - pci@a000 { + pcie@a000 { interrupt-map-mask = <f800 0 0 7>; interrupt-map = <
Signature · 1 line
1.5.2.2.549.gaeb59
Quoted 9 lines · Randy Vinson
arch/powerpc/boot/dts/mpc8548cds.dts +0
-1@@ -44,8 +44,14 @@ #size-cells = <1>; #interrupt-cells = <2>; device_type = "soc"; - ranges = <0 e0000000 00100000>;
arch/powerpc/boot/dts/mpc8548cds.dts line 55
Quoted 10 lines
arch/powerpc/boot/dts/mpc8548cds.dts +8
-1- reg = <e0000000 00100000>; // CCSRBAR 1M + ranges = <00001000 e0001000 000ff000 + 80000000 80000000 10000000 + e2000000 e2000000 00800000 + 90000000 90000000 10000000 + e2800000 e2800000 00800000 + a0000000 a0000000 20000000 + e3000000 e3000000 01000000>; + reg = <e0000000 00001000>; // CCSRBAR bus-frequency = <0>;
Instead of duplicating all of these ranges, might we want to move the PCI node out of the SOC node, and include a phandle a PCI control node under the SOC (similar to the PQ2 /chipselect node in my patchset)?
-Scott