Skip to contentSkip to conversation

StGIT (or guilt) + git-svn?

DISCUSSION Steven Grimm 3 participants 7 messages Jun 15, 2016

lore
Share & tools
lore
#0 lore raw

Anyone have experience mixing git-svn with either StGIT or guilt? A coworker of mine was asking if he could do local versioning of files he has no intention of committing to svn. He wanted a ".git-svnignore" kind of scheme but I think his use case sounds like the sort of thing StGIT and guilt are designed for. What I'm not sure about is whether git-svn will confuse those tools or vice versa. I don't think I've ever seen that combo discussed on the list.

-Steve

#1 lore raw
Quoted 9 lines · Steven Grimm

Anyone have experience mixing git-svn with either StGIT or guilt? A coworker of mine was asking if he could do local versioning of files he has no intention of committing to svn. He wanted a ".git-svnignore" kind of scheme but I think his use case sounds like the sort of thing StGIT and guilt are designed for. What I'm not sure about is whether git-svn will confuse those tools or vice versa. I don't think I've ever seen that combo discussed on the list.

-Steve

Well, I can say that stgit and git-svn in no way interfere with each other. I tend to use stgit to clean up my patch sets before commiting them, and have never had a problem. Thinking about what the tools do, I can't imagine that it would cause a problem.

That said, I'm not sure that stgit will help you with "local versioning" of files (I'm not even sure what you mean). Perhaps you can elaborate on this point.

Signature · 8 lines
-Steven Walter <[email protected]>
"A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects."
   -Robert Heinlein
#2 lore raw
Quoted 4 lines · Steven Walter

That said, I'm not sure that stgit will help you with "local versioning" of files (I'm not even sure what you mean). Perhaps you can elaborate on this point.

He wants to create some files in his git-svn clone and use git to manage them -- checkpointing his work in progress, backing out changes, etc., without publishing those files to the svn repository. The files in question are not already in svn. But he does want to work on other files that *are* in the svn repository, and wants those changes to be committed back.

So my assumption was that he would do something like maintain his local-only changes as StGIT patches that never get committed to git. His other changes would get committed from StGIT to git, and from there he'd do his normal git-svn dcommit. Or maybe git-svn dcommit followed by stg rebase since git-svn dcommit creates new revision IDs.

In any event, now that I know it's working successfully for at least one person, I'll point him to stg and he can play with it a bit. Didn't want to lead him into a dead end. Thanks!

-Steve

#3 lore raw
Quoted 19 lines · Steven Grimm
Quoted 4 lines · Steven Walter

That said, I'm not sure that stgit will help you with "local versioning" of files (I'm not even sure what you mean). Perhaps you can elaborate on this point.

He wants to create some files in his git-svn clone and use git to manage them -- checkpointing his work in progress, backing out changes, etc., without publishing those files to the svn repository. The files in question are not already in svn. But he does want to work on other files that *are* in the svn repository, and wants those changes to be committed back.

So my assumption was that he would do something like maintain his local-only changes as StGIT patches that never get committed to git. His other changes would get committed from StGIT to git, and from there he'd do his normal git-svn dcommit. Or maybe git-svn dcommit followed by stg rebase since git-svn dcommit creates new revision IDs.

Quoted 3 lines

In any event, now that I know it's working successfully for at least one person, I'll point him to stg and he can play with it a bit. Didn't want to lead him into a dead end. Thanks!

If I understand your scenario correctly, guilt will work just as well.

Josef 'Jeff' Sipek.

Signature · 2 lines
All science is either physics or stamp collecting.
		- Ernest Rutherford
#4 lore raw
In reply to Steven Grimm
Quoted 7 lines · Steven Grimm

He wants to create some files in his git-svn clone and use git to manage them -- checkpointing his work in progress, backing out changes, etc., without publishing those files to the svn repository. The files in question are not already in svn. But he does want to work on other files that *are* in the svn repository, and wants those changes to be committed back.

Quoted 5 lines

So my assumption was that he would do something like maintain his local-only changes as StGIT patches that never get committed to git. His other changes would get committed from StGIT to git, and from there he'd do his normal git-svn dcommit. Or maybe git-svn dcommit followed by stg rebase since git-svn dcommit creates new revision IDs.

You certainly could do local versioning this way, but it isn't how I accomplish the same thing. I keep another branch on top of my "public" svn commits for local stuff. If I always run git-svn dcommit from the public branch, the local changes will stay local. After committing, I just have to rebase the local branch on onto git-svn.

Signature · 8 lines
-Steven Walter <[email protected]>
"A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects."
   -Robert Heinlein
#5 lore raw
Quoted 5 lines · Steven Walter

You certainly could do local versioning this way, but it isn't how I accomplish the same thing. I keep another branch on top of my "public" svn commits for local stuff. If I always run git-svn dcommit from the public branch, the local changes will stay local. After committing, I just have to rebase the local branch on onto git-svn.

Do you mix your public and private commits on the private branch, then cherry-pick some of them over to the public branch before running dcommit? Or do you have some other workflow?

That was actually my first suggestion to him, but he pointed out (and I had to agree) that that would mean he's always just one mistake away from publishing his local changes. All it takes is getting interrupted for a moment and mistakenly thinking he already switched to the public branch. He wants some less human-error-prone way to tell the system that a particular change and/or a particular file is not intended for publication, and for the system to just honor that without further human intervention.

Actually, one could argue that the above isn't a git-svn issue at all. You could reasonably want the same thing from git-push too (and even from pull, though that'd be trickier.) I guess it'd take the form of marking a commit as local-only, and having the system automatically rebase all the local-only commits on top of the public ones.

Maybe a wrapper than maintains a pair of underlying git branches for each user-visible branch would work. If you have a branch "foo" with some public and some private changes (private ones in lower case here):

A---B---C---D---e---f---g foo
^ foo-public

Now if you commit a new private revision, it's like normal:

A---B---C---D---e---f---g---h foo
^ foo-public

But if you commit a new public revision, we do something like

git commit
git checkout foo-public
git cherry-pick foo
git checkout foo
git rebase foo-public

to get

A---B---C---D---H---e---f---g foo
^ foo-public

Then, when it comes time to do the push / dcommit, we always switch to the foo-public branch first. We push / dcommit, then checkout foo and rebase it on foo-public again (since svn dcommit will leave foo-public pointing at a different revision.)

This seems like it should work in the context of git-svn with its mostly-linear history. Not sure if it'd fall flat on its face in the presence of lots of branching and merging.

I also suspect I've more or less just described StGIT and this would be a big waste of time to reinvent from scratch.

-Steve

#6 lore raw
Quoted 3 lines · Steven Grimm

Do you mix your public and private commits on the private branch, then cherry-pick some of them over to the public branch before running dcommit? Or do you have some other workflow?

Yes, what you describe is what I usually do.

Quoted 8 lines

That was actually my first suggestion to him, but he pointed out (and I had to agree) that that would mean he's always just one mistake away from publishing his local changes. All it takes is getting interrupted for a moment and mistakenly thinking he already switched to the public branch. He wants some less human-error-prone way to tell the system that a particular change and/or a particular file is not intended for publication, and for the system to just honor that without further human intervention.

If I wanted to be argumentative, you're still only one step from disaster with stgit. In order to build, you'd have to keep your local changes applied. If you forgot to pop them before a dcommit, they would be published.

Quoted 36 lines

Actually, one could argue that the above isn't a git-svn issue at all. You could reasonably want the same thing from git-push too (and even from pull, though that'd be trickier.) I guess it'd take the form of marking a commit as local-only, and having the system automatically rebase all the local-only commits on top of the public ones.

Maybe a wrapper than maintains a pair of underlying git branches for each user-visible branch would work. If you have a branch "foo" with some public and some private changes (private ones in lower case here):

A---B---C---D---e---f---g foo
^ foo-public

Now if you commit a new private revision, it's like normal:

A---B---C---D---e---f---g---h foo
^ foo-public

But if you commit a new public revision, we do something like

git commit
git checkout foo-public
git cherry-pick foo
git checkout foo
git rebase foo-public

to get

A---B---C---D---H---e---f---g foo
^ foo-public

Then, when it comes time to do the push / dcommit, we always switch to the foo-public branch first. We push / dcommit, then checkout foo and rebase it on foo-public again (since svn dcommit will leave foo-public pointing at a different revision.)

Quoted 6 lines

This seems like it should work in the context of git-svn with its mostly-linear history. Not sure if it'd fall flat on its face in the presence of lots of branching and merging.

I also suspect I've more or less just described StGIT and this would be a big waste of time to reinvent from scratch.

This actually sounds fairly useful, as it's mostly the automation of my existing workflow. Let me know if you follow up on this.

Signature · 8 lines
-Steven Walter <[email protected]>
"A human being should be able to change a diaper, plan an invasion,
butcher a hog, conn a ship, design a building, write a sonnet, balance
accounts, build a wall, set a bone, comfort the dying, take orders,
give orders, cooperate, act alone, solve equations, analyze a new
problem, pitch manure, program a computer, cook a tasty meal, fight
efficiently, die gallantly. Specialization is for insects."
   -Robert Heinlein