Kconfig: order options

index ae27af0..2e264b0 100644
@@ -379,30 +379,6 @@ config PCI_HERMES
 	  common.  Some of the built-in wireless adaptors in laptops are of
 	  this variety.
 
-config ATMEL
-      tristate "Atmel at76c50x chipset  802.11b support"
-      depends on (PCI || PCMCIA) && WLAN_80211
-      select WIRELESS_EXT
-      select FW_LOADER
-      select CRC32
-       ---help---
-        A driver 802.11b wireless cards based on the Atmel fast-vnet
-        chips. This driver supports standard Linux wireless extensions. 
- 
-        Many  cards based on this chipset do not have flash memory
-        and need their firmware loaded at start-up. If yours is 
-        one of these, you will need to provide a firmware image
-        to be loaded into the card by the driver. The Atmel
-        firmware package can be downloaded from
-        <http://www.thekelleys.org.uk/atmel>
-
-config PCI_ATMEL
-      tristate "Atmel at76c506 PCI cards"
-      depends on ATMEL && PCI
-       ---help---
-        Enable support for PCI and mini-PCI cards containing the
-        Atmel at76c506 chip.
-
 config PCMCIA_HERMES
 	tristate "Hermes PCMCIA card support"
 	depends on PCMCIA && HERMES

@@ -437,6 +413,40 @@ config PCMCIA_SPECTRUM
 	  for downloading Symbol firmware are available at
 	  <http://sourceforge.net/projects/orinoco/>
 
+config ATMEL
+      tristate "Atmel at76c50x chipset  802.11b support"
+      depends on (PCI || PCMCIA) && WLAN_80211
+      select WIRELESS_EXT
+      select FW_LOADER
+      select CRC32
+       ---help---
+        A driver 802.11b wireless cards based on the Atmel fast-vnet
+        chips. This driver supports standard Linux wireless extensions. 
+ 
+        Many  cards based on this chipset do not have flash memory
+        and need their firmware loaded at start-up. If yours is 
+        one of these, you will need to provide a firmware image
+        to be loaded into the card by the driver. The Atmel
+        firmware package can be downloaded from
+        <http://www.thekelleys.org.uk/atmel>
+
+config PCI_ATMEL
+      tristate "Atmel at76c506 PCI cards"
+      depends on ATMEL && PCI
+       ---help---
+        Enable support for PCI and mini-PCI cards containing the
+        Atmel at76c506 chip.
+
+config PCMCIA_ATMEL
+	tristate "Atmel at76c502/at76c504 PCMCIA cards"
+	depends on ATMEL && PCMCIA
+	select WIRELESS_EXT
+	select FW_LOADER
+	select CRC32
+	---help---
+	  Enable support for PCMCIA cards containing the
+	  Atmel at76c502 and at76c504 chips.
+
 config AIRO_CS
 	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
 	depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211

@@ -462,16 +472,6 @@ config AIRO_CS
 	  for location).  You also want to check out the PCMCIA-HOWTO,
 	  available from <http://www.tldp.org/docs.html#howto>.
 
-config PCMCIA_ATMEL
-	tristate "Atmel at76c502/at76c504 PCMCIA cards"
-	depends on ATMEL && PCMCIA
-	select WIRELESS_EXT
-	select FW_LOADER
-	select CRC32
-	---help---
-	  Enable support for PCMCIA cards containing the
-	  Atmel at76c502 and at76c504 chips.
-
 config PCMCIA_WL3501
       tristate "Planet WL3501 PCMCIA cards"
       depends on EXPERIMENTAL && PCMCIA && WLAN_80211