2.6.23-rc1-git3 init failure
Quoted 17 lines
Boot failure on
x86_64(64X2), says it can't find init, specifically /init. 2.6.23-rc1-git1 boots and runs successfully. I haven't tried -git2. I shall reboot on 2.6.23-rc1-git3 tomorrow and record the full message.
Strings from vmlinux in both the above:-Kernel alive
/dev/console
<4>Warning: unable to open an initial console. <4>Failed to execute %s
<4>Failed to execute %s. Attempting defaults.../sbin/init/etc/init/bin/init/bin/sh
No init found. Try passing init= option to kernel.
Quoted 3 lines
Tried option "init=/sbin/init" and got the same failure. Regards
Sid.
I see the sam problem with 2.6.23-rc1-git5.
Freeing unused kernel memory: 236k freed
failed to execute /init
kernel panic - not syncing: No init found. Try passing init= option to kernel
Copying /sbin/init to / results in the same error. openSUSE 10.3Alpha6plus
# rpm -qf /sbin/init sysvinit-2.86-90
Regards
Sid.
Signature · 3 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Hi Sid,
Quoted 28 lines · Sid Boyce
Quoted 17 lines
Boot failure on
x86_64(64X2), says it can't find init, specifically /init. 2.6.23-rc1-git1 boots and runs successfully. I haven't tried -git2. I shall reboot on 2.6.23-rc1-git3 tomorrow and record the full message.
Strings from vmlinux in both the above:-Kernel alive
/dev/console
<4>Warning: unable to open an initial console. <4>Failed to execute %s
<4>Failed to execute %s. Attempting defaults.../sbin/init/etc/init/bin/init/bin/sh
No init found. Try passing init= option to kernel.Quoted 3 lines
Tried option "init=/sbin/init" and got the same failure. Regards
Sid.I see the sam problem with 2.6.23-rc1-git5.
Freeing unused kernel memory: 236k freed
failed to execute /init
kernel panic - not syncing: No init found. Try passing init= option to kernel
Quoted 4 lines
Copying
/sbin/initto / results in the same error. openSUSE 10.3Alpha6plus# rpm -qf /sbin/init sysvinit-2.86-90
Please read chapter 4.1 and 4.5
http://www.stardust.webpages.pl/files/handbook/handbook-en-0.3-rc1.pdf
It should be very simple
git-bisect start
git-bisect bad
git-bisect good 0de085bb474f64e4fdb2f1ff3268590792648c7b
and so on and so forth
Quoted 3 lines
Regards
Sid.
Regards,
Michal
Signature · 2 lines
LOG http://www.stardust.webpages.pl/log/
Quoted 50 lines · Michal Piotrowski
Hi Sid,
Quoted 28 lines · Sid Boyce
Quoted 17 lines
Boot failure on
x86_64(64X2), says it can't find init, specifically /init. 2.6.23-rc1-git1 boots and runs successfully. I haven't tried -git2. I shall reboot on 2.6.23-rc1-git3 tomorrow and record the full message.
Strings from vmlinux in both the above:-Kernel alive
/dev/console
<4>Warning: unable to open an initial console. <4>Failed to execute %s
<4>Failed to execute %s. Attempting defaults.../sbin/init/etc/init/bin/init/bin/sh
No init found. Try passing init= option to kernel.Quoted 3 lines
Tried option "init=/sbin/init" and got the same failure. Regards
Sid.I see the sam problem with 2.6.23-rc1-git5.
Freeing unused kernel memory: 236k freed
failed to execute /init
kernel panic - not syncing: No init found. Try passing init= option to kernelQuoted 5 lines
Copying
/sbin/initto / results in the same error. openSUSE 10.3Alpha6plus# rpm -qf /sbin/init sysvinit-2.86-90Please read chapter 4.1 and 4.5
http://www.stardust.webpages.pl/files/handbook/handbook-en-0.3-rc1.pdfIt should be very simple
git-bisect start
git-bisect bad
git-bisect good0de085bb474f64e4fdb2f1ff3268590792648c7band so on and so forth
Quoted 8 lines
Quoted 3 lines
Regards
Sid.Regards,
Michal
Looks like a job for the weekend.
Regards
Sid.
Signature · 3 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Quoted 50 lines · Michal Piotrowski
Hi Sid,
Quoted 28 lines · Sid Boyce
Quoted 17 lines
Boot failure on
x86_64(64X2), says it can't find init, specifically /init. 2.6.23-rc1-git1 boots and runs successfully. I haven't tried -git2. I shall reboot on 2.6.23-rc1-git3 tomorrow and record the full message.
Strings from vmlinux in both the above:-Kernel alive
/dev/console
<4>Warning: unable to open an initial console. <4>Failed to execute %s
<4>Failed to execute %s. Attempting defaults.../sbin/init/etc/init/bin/init/bin/sh
No init found. Try passing init= option to kernel.Quoted 3 lines
Tried option "init=/sbin/init" and got the same failure. Regards
Sid.I see the sam problem with 2.6.23-rc1-git5.
Freeing unused kernel memory: 236k freed
failed to execute /init
kernel panic - not syncing: No init found. Try passing init= option to kernelQuoted 5 lines
Copying
/sbin/initto / results in the same error. openSUSE 10.3Alpha6plus# rpm -qf /sbin/init sysvinit-2.86-90Please read chapter 4.1 and 4.5
http://www.stardust.webpages.pl/files/handbook/handbook-en-0.3-rc1.pdfIt should be very simple
git-bisect start
git-bisect bad
git-bisect good0de085bb474f64e4fdb2f1ff3268590792648c7band so on and so forth
Quoted 8 lines
Quoted 3 lines
Regards
Sid.Regards,
Michal
I had to do a fresh install of opeSUSE 10.3 Alpha6 to replace a failing drive. After that I again built 2.6.23-rc1-git10 which boots without problems. My guess is that something on the old hard drive got mangled. The old drive was PATA, the new one SATA, also disappeared have been the problems that suddenly appeared with sata_nv slow responses and timeouts with no devices installed and which I didn't see without the sata_nv module loaded. Regards
Sid.
Signature · 3 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks