Skip to contentSkip to conversation

mmc: at91_mci: remove whitespace at the end of lines

PATCH In review Nicolas Ferre 2 participants 2 messages Aug 8, 2007 – Aug 9, 2007

Subsystems (2)
MMC, SD and SDIO Arm/Microchip (AT91) SoC support
lore
Share & tools
lore

Nicolas Ferre

author
#0 lore raw

PATCH 1/1 mmc: at91_mci: remove whitespace at the end of lines

Some cleanup with whitespace/tab at the end of lines.

Signed-off-by Nicolas Ferre <[email protected]> ---
drivers/mmc/host/at91_mci.c +0 -0
Index: b/drivers/mmc/host/at91_mci.c
===================================================================
@@ -83,7 +83,7 @@
 

#define AT91_MCI_ERRORS	(AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE	\
		| AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE		\
-		| AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)			
+		| AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)

#define at91_mci_read(host, reg) __raw_readl((host)->baseaddr + (reg))
#define at91_mci_write(host, reg, val) __raw_writel((val), (host)->baseaddr + (reg))
@@ -676,15 +676,15 @@ static irqreturn_t at91_mci_irq(int irq,

	int_status = at91_mci_read(host, AT91_MCI_SR);
	int_mask = at91_mci_read(host, AT91_MCI_IMR);
-	
+
	pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
		int_status & int_mask);
-	
+
	int_status = int_status & int_mask;

	if (int_status & AT91_MCI_ERRORS) {
		completed = 1;
-		
+
		if (int_status & AT91_MCI_UNRE)
			pr_debug("MMC: Underrun error\n");
		if (int_status & AT91_MCI_OVRE)