USB and MMC device problems on Kernel 2.6.22
Sorry for not clear about the kernel version, let me try again:
I have an ARM hardware board works fine with USB and MMC on kernel 2.6.11. Now, I've just upgraded it to kernel 2.6.22. The modules seem loaded fine, please see following list, but neither USB nor MMC could detect devices when a USB stick or SD card was plugged in (I enabled module debug, but nothing printed out, no device node created in /dev). It seems some processes were not running, but I can see usbd and mmcd were running at following list, or what is missing?
K22 $ ps
PID Uid VmSize Stat Command
1 root 268 S init
2 root SW< [kthreadd]
3 root SWN [ksoftirqd/0]
4 root SW< [events/0]
5 root SW< [khelper]
31 root SW< [kblockd/0] 32 root SW< [ksuspend_usbd] 35 root SW< [khubd] 37 root SW< [kseriod] 49 root SW [pdflush] 50 root SW [pdflush] 51 root SW< [kswapd0] 52 root SW< [aio/0] 638 root SW< [kapmd] 670 root SW< [mtdblockd] 693 root SW< [s3c2410-spi.1] 710 root SW< [kbd_queue/0] 746 root SW< [kmmcd] 775 root 644 S /bin/inetd -f 776 root 404 S /bin/sh 790 root 324 R ps
I understand that the devfs is no longer supported by the kernel 2.6.22, but should the modules still be able to detect the devices? I manually created nodes on /dev tree such as /dev/mmc /dev/scsi before building and downloading to the target. Any clues please?
K22 $ lsmod
Module Size Used by nls_utf8 1696 0 nls_iso8859_1 3936 0 nls_cp437 5600 0 nls_ascii 3936 0 vfat 10336 0 fat 48028 1 vfat mmc_block 8580 0 s3c2410mci 6560 0 mmc_core 25876 2 mmc_block,s3c2410mci
Thank you.
Jim
Quoted 5 lines · On Sep 9 2007 08:28, [email protected] wrote:
I have an ARM hardware board works fine with USB and MMC on kernel 2.6.11. Now, I've just upgraded it to kernel 2.6.22. The modules seem loaded fine, please see following list, but neither USB nor MMC could detect devices when a USB stick or SD card was plugged in
If it detects something, it should show up in lsusb.
Hi!
[email protected] пишет:
Quoted 12 lines
Sorry for not clear about the kernel version, let me try again:
I have an ARM hardware board works fine with USB and MMC on kernel 2.6.11. Now, I've just upgraded it to kernel 2.6.22. The modules seem loaded fine, please see following list, but neither USB nor MMC could detect devices when a USB stick or SD card was plugged in (I enabled module debug, but nothing printed out, no device node created in /dev). It seems some processes were not running, but I can see usbd and mmcd were running at following list, or what is missing?
K22 $ ps
PID Uid VmSize Stat Command
1 root 268 S init
2 root SW< [kthreadd]
3 root SWN [ksoftirqd/0]
4 root SW< [events/0]
5 root SW< [khelper]
Quoted 17 lines
31 root SW< [kblockd/0] 32 root SW< [ksuspend_usbd] 35 root SW< [khubd] 37 root SW< [kseriod] 49 root SW [pdflush] 50 root SW [pdflush] 51 root SW< [kswapd0] 52 root SW< [aio/0] 638 root SW< [kapmd] 670 root SW< [mtdblockd] 693 root SW< [s3c2410-spi.1] 710 root SW< [kbd_queue/0] 746 root SW< [kmmcd] 775 root 644 S /bin/inetd -f 776 root 404 S /bin/sh 790 root 324 R ps
But does anything show up in syslog?
Quoted 1 line
I understand that the devfs is no longer supported by the kernel 2.6.22, but should the modules still be able to detect the devices? I manually created nodes on /dev tree such as
/dev/mmc/dev/scsibefore building and downloading to the target. Any clues please?
Please also make sure you've got decent udev running and properly configured.
Quoted 14 lines
K22 $ lsmod
Module Size Used by nls_utf8 1696 0 nls_iso8859_1 3936 0 nls_cp437 5600 0 nls_ascii 3936 0 vfat 10336 0 fat 48028 1 vfat mmc_block 8580 0 s3c2410mci 6560 0 mmc_core 25876 2 mmc_block,s3c2410mci
Quoted 3 lines
Thank you.
Jim
In the hope it helps.
Regards,
Vladimir