Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE
Subsystems (5)
cover Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE
In motivation to abstract scsi_cmnd members and insulate drivers/transports from scsi_cmnd internals. The last place left was the REQUEST_SENSE sequence when done synchronous, by drivers.
Also all these drivers would do a use_sg==0 command invocation, preventing from doing cleanups on these drivers/transports. So this patchset is left-overs from Christoph's 2.6.18 cleanups.
In this patchset I have re-factored scsi_error to make it possible for drivers to use an abstract (easy to use, I hope) API for invoking a REQUEST_SENSE command. The API is declared in scsi/scsi_eh.h
[patch 1/5] scsi_error: code cleanup before refactoring of scsi_send_eh_cmnd()
Move some code around and add new fixtures here. So next patch is left a Mechanical breakup of code.
[patch 2/5] scsi_error: Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE
Here new API is introduced in scsi/scsi_eh.h and mechanical move of code to the new functions.
[PATCH 3/5] usb: transport.c use scsi_eh API in REQUEST_SENSE execution
Use above API for drivers/usb/storage/transport.c. Now that last User of use_sg==0, we can do the USB storage cleanups.
[PATCH 4/5] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation
All NCR5380 family of drivers used to send a REQUEST_SENSE command.
[PATCH 5/5] arm: fas216 Use scsi_eh API for REQUEST_SENSE invocation
drivers/scsi/arm/fas216.c need change also.
Please Test as much as possible, and report any problems/differences.
Boaz Harrosh
PATCH 1/5 scsi_error: code cleanup before refactoring of scsi_send_eh_cmnd()
- regrouped variables for easier reviewing of next patch
- Support of cmnd==NULL in call to scsi_send_eh_cmnd()
- In the REQUEST_SENSE case set cmnd[4] to the size of sense_buffer. It was previously set by caller but needed to be in sync with sense_buffer size.
- Also save/restore resid of faild command.
--- drivers/scsi/scsi_error.c | 37 +++++++++++++++++++++++-------------- 1 files changed, 23 insertions(+), 14 deletions(-)
drivers/scsi/scsi_error.c +23 -14
@@ -611,17 +611,20 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, {struct scsi_device *sdev = scmd->device;struct Scsi_Host *shost = sdev->host; -int old_result = scmd->result;DECLARE_COMPLETION_ONSTACK (done);unsigned long timeleft;unsigned long flags; -struct scatterlist sgl; + +unsigned char old_cmd_len;unsigned char old_cmnd[MAX_COMMAND_SIZE ];enum dma_data_direction old_data_direction; -unsigned short old_use_sg; -unsigned char old_cmd_len;unsigned old_bufflen;void *old_buffer; +unsigned short old_use_sg; +int old_resid; +int old_result; + +struct scatterlist sgl;int rtn;/*
@@ -631,15 +634,20 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,* we will need to restore these values prior to running the actual * command. */ - old_buffer = scmd->request_buffer; - old_bufflen = scmd->request_bufflen; + old_cmd_len = scmd->cmd_len;memcpy (old_cmnd, scmd->cmnd,sizeof (scmd->cmnd)); old_data_direction = scmd->sc_data_direction; - old_cmd_len = scmd->cmd_len; + old_bufflen = scmd->request_bufflen; + old_buffer = scmd->request_buffer; old_use_sg = scmd->use_sg; + old_resid = scmd->resid; + old_result = scmd->result; -memset (scmd->cmnd,0 ,sizeof (scmd->cmnd)); -memcpy (scmd->cmnd, cmnd, cmnd_size); +if (cmnd) { +memset (scmd->cmnd,0 ,sizeof (scmd->cmnd)); +memcpy (scmd->cmnd, cmnd, cmnd_size); + scmd->cmd_len =COMMAND_SIZE (scmd->cmnd[0 ]); + }if (copy_sense) { sg_init_one(&sgl, scmd->sense_buffer,
@@ -649,6 +657,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, scmd->request_bufflen = sgl.length; scmd->request_buffer = &sgl; scmd->use_sg =1 ; + scmd->cmnd[4 ] = sgl.length; }else { scmd->request_buffer =NULL ; scmd->request_bufflen =0 ;
@@ -657,7 +666,6 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, } scmd->underflow =0 ; - scmd->cmd_len =COMMAND_SIZE (scmd->cmnd[0 ]);if (sdev->scsi_level <=SCSI_2 ) scmd->cmnd[1] = (scmd->cmnd[1] & 0x1f) |
@@ -716,12 +724,13 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,/* * Restore original data */ - scmd->request_buffer = old_buffer; - scmd->request_bufflen = old_bufflen; + scmd->cmd_len = old_cmd_len;memcpy (scmd->cmnd, old_cmnd,sizeof (scmd->cmnd)); scmd->sc_data_direction = old_data_direction; - scmd->cmd_len = old_cmd_len; + scmd->request_bufflen = old_bufflen; + scmd->request_buffer = old_buffer; scmd->use_sg = old_use_sg; + scmd->resid = old_resid; scmd->result = old_result;return rtn; }
@@ -738,7 +747,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,static int scsi_request_sense (struct scsi_cmnd *scmd) {static unsigned char generic_sense[6 ] = - {REQUEST_SENSE ,0 ,0 ,0 ,252 ,0 }; + {REQUEST_SENSE ,0 ,0 ,0 ,0 ,0 };return scsi_send_eh_cmnd (scmd, generic_sense,6 ,SENSE_TIMEOUT ,1 ); }
Signature · 1 line
1.5.3.1
PATCH 2/5 Refactoring scsi_error to facilitate in synchronous REQUEST_SENSE
In reply to Boaz Harrosh - Drivers/transports that want to send a synchronous REQUEST_SENSE command as part of their .queuecommand sequence, have 2 new API's that facilitate in doing so and abstract them from scsi-ml internals.
void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd,
struct scsi_eh_save_cmnd_info *sesci, unsigned char *cmnd, int cmnd_size, int copy_sense) -
Will hijack a command and prepare it for request sense if needed. And will save any later needed info into a scsi_eh_save_cmnd_info structure.
void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd,
struct scsi_eh_save_cmnd_info *sesci);
Will undo any changes done to a command by above function. Making it ready for completion.
- Re-factor scsi_send_eh_cmnd to use above APIs
Sign-off-by Boaz Harrosh <[email protected]>
--- drivers/scsi/scsi_error.c | 133 +++++++++++++++++++++++++++------------------ include/scsi/scsi_eh.h | 23 ++++++++- 2 files changed, 102 insertions(+), 54 deletions(-)
drivers/scsi/scsi_error.c +80 -53
@@ -590,42 +590,24 @@ static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd) }/** -* scsi_send_eh_cmnd - submit a scsi command as part of error recory +* scsi_prep_eh_cmnd - Save a scsi command info as part of error recory * @scmd: SCSI command structure to hijack -* @cmnd: CDB to send +* @sesci structure to save restore information +* @cmnd: CDB to send. Can be NULL if no new cmnd is needed * @cmnd_size: size in bytes of @cmnd -* @timeout: timeout for this request * @copy_sense: request sense data if set to 1 * -* This function is used to send a scsi command down to a target device -* as part of the error recovery process. If @copy_sense is 0 the command -* sent must be one that does not transfer any data. If @copy_sense is 1 -* the command must be REQUEST_SENSE and this functions copies out the -* sense buffer it got into @scmd->sense_buffer. -* -* Return value: -* SUCCESS or FAILED or NEEDS_RETRY +* This function is used to save a scsi command information before re-execution +* as part of an error recovery process. If @copy_sense is 0 the command +* given must be one that does not transfer any data. If @copy_sense is 1 +* the command must be REQUEST_SENSE and this functions sets up the +* command buffers to be read into @scmd->sense_buffer. **/ -static int scsi_send_eh_cmnd (struct scsi_cmnd *scmd,unsigned char *cmnd, -int cmnd_size,int timeout,int copy_sense) +void scsi_eh_prep_cmnd (struct scsi_cmnd *scmd, +struct scsi_eh_save_cmnd_info *sesci,unsigned char *cmnd, +int cmnd_size,int copy_sense) {struct scsi_device *sdev = scmd->device; -struct Scsi_Host *shost = sdev->host; -DECLARE_COMPLETION_ONSTACK (done); -unsigned long timeleft; -unsigned long flags; - -unsigned char old_cmd_len; -unsigned char old_cmnd[MAX_COMMAND_SIZE ]; -enum dma_data_direction old_data_direction; -unsigned old_bufflen; -void *old_buffer; -unsigned short old_use_sg; -int old_resid; -int old_result; - -struct scatterlist sgl; -int rtn;/* * We need saved copies of a number of fields - this is because
@@ -634,14 +616,14 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,* we will need to restore these values prior to running the actual * command. */ - old_cmd_len = scmd->cmd_len; -memcpy (old_cmnd, scmd->cmnd,sizeof (scmd->cmnd)); - old_data_direction = scmd->sc_data_direction; - old_bufflen = scmd->request_bufflen; - old_buffer = scmd->request_buffer; - old_use_sg = scmd->use_sg; - old_resid = scmd->resid; - old_result = scmd->result; + sesci->old_cmd_len = scmd->cmd_len; +memcpy (sesci->old_cmnd, scmd->cmnd,sizeof (scmd->cmnd)); + sesci->old_data_direction = scmd->sc_data_direction; + sesci->old_bufflen = scmd->request_bufflen; + sesci->old_buffer = scmd->request_buffer; + sesci->old_use_sg = scmd->use_sg; + sesci->old_resid = scmd->resid; + sesci->old_result = scmd->result;if (cmnd) {memset (scmd->cmnd,0 ,sizeof (scmd->cmnd));
@@ -650,14 +632,15 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, }if (copy_sense) { -sg_init_one (&sgl, scmd->sense_buffer, +struct scatterlist * sgl = &sesci->sense_sgl; +sg_init_one (sgl, scmd->sense_buffer,sizeof (scmd->sense_buffer)); scmd->sc_data_direction =DMA_FROM_DEVICE ; - scmd->request_bufflen = sgl.length; - scmd->request_buffer = &sgl; + scmd->request_bufflen = sgl->length; + scmd->request_buffer = sgl; scmd->use_sg =1 ; - scmd->cmnd[4 ] = sgl.length; + scmd->cmnd[4 ] = sgl->length; }else { scmd->request_buffer =NULL ; scmd->request_bufflen =0 ;
@@ -676,7 +659,62 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,* untransferred sense data should be interpreted as being zero. */ memset (scmd->sense_buffer,0 ,sizeof (scmd->sense_buffer)); +} +EXPORT_SYMBOL (scsi_eh_prep_cmnd); +/** +* scsi_restore_eh_cmnd - Restore a scsi command info as part of error recory +* @scmd: SCSI command structure to restore +* @sesci saved information from a coresponding call to scsi_prep_eh_cmnd +* +* Undo any damage done by above scsi_prep_eh_cmnd(). +**/ +void scsi_eh_restore_cmnd (struct scsi_cmnd * scmd, +struct scsi_eh_save_cmnd_info *sesci) +{ +/* +* Restore original data +*/ + scmd->cmd_len = sesci->old_cmd_len; +memcpy (scmd->cmnd, sesci->old_cmnd,sizeof (scmd->cmnd)); + scmd->sc_data_direction = sesci->old_data_direction; + scmd->request_bufflen = sesci->old_bufflen; + scmd->request_buffer = sesci->old_buffer; + scmd->use_sg = sesci->old_use_sg; + scmd->resid = sesci->old_resid; + scmd->result = sesci->old_result; +} +EXPORT_SYMBOL (scsi_eh_restore_cmnd); + +/** +* scsi_send_eh_cmnd - submit a scsi command as part of error recory +* @scmd: SCSI command structure to hijack +* @cmnd: CDB to send +* @cmnd_size: size in bytes of @cmnd +* @timeout: timeout for this request +* @copy_sense: request sense data if set to 1 +* +* This function is used to send a scsi command down to a target device +* as part of the error recovery process. If @copy_sense is 0 the command +* sent must be one that does not transfer any data. If @copy_sense is 1 +* the command must be REQUEST_SENSE and this functions copies out the +* sense buffer it got into @scmd->sense_buffer. +* +* Return value: +* SUCCESS or FAILED or NEEDS_RETRY +**/ +static int scsi_send_eh_cmnd (struct scsi_cmnd *scmd,unsigned char *cmnd, +int cmnd_size,int timeout,int copy_sense) +{ +struct scsi_device *sdev = scmd->device; +struct Scsi_Host *shost = sdev->host; +DECLARE_COMPLETION_ONSTACK (done); +unsigned long timeleft; +unsigned long flags; +struct scsi_eh_save_cmnd_info sesci; +int rtn; + +scsi_eh_prep_cmnd (scmd, &sesci, cmnd, cmnd_size, copy_sense); shost->eh_action = &done;spin_lock_irqsave (shost->host_lock, flags);
@@ -720,18 +758,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, rtn =FAILED ; } - -/* -* Restore original data -*/ - scmd->cmd_len = old_cmd_len; -memcpy (scmd->cmnd, old_cmnd,sizeof (scmd->cmnd)); - scmd->sc_data_direction = old_data_direction; - scmd->request_bufflen = old_bufflen; - scmd->request_buffer = old_buffer; - scmd->use_sg = old_use_sg; - scmd->resid = old_resid; - scmd->result = old_result; +scsi_eh_restore_cmnd (scmd, &sesci);return rtn; }
include/scsi/scsi_eh.h +22 -1
@@ -1,7 +1,7 @@#ifndef _SCSI_SCSI_EH_H#define _SCSI_SCSI_EH_H -struct scsi_cmnd ; +#include <scsi/scsi_cmnd.h> struct scsi_device ;struct Scsi_Host ;
@@ -65,4 +65,25 @@ extern int scsi_get_sense_info_fld(const u8 * sense_buffer, int sb_len,extern int scsi_reset_provider (struct scsi_device *,int ); +struct scsi_eh_save_cmnd_info { +int old_result; +enum dma_data_direction old_data_direction; +unsigned char old_cmd_len; +unsigned char old_cmnd[MAX_COMMAND_SIZE ]; + +void * old_buffer; +unsigned old_bufflen; +unsigned short old_use_sg; +int old_resid; + +struct scatterlist sense_sgl; +}; + +extern void scsi_eh_prep_cmnd (struct scsi_cmnd *scmd, +struct scsi_eh_save_cmnd_info *sesci,unsigned char *cmnd, +int cmnd_size,int copy_sense); + +extern void scsi_eh_restore_cmnd (struct scsi_cmnd * scmd, +struct scsi_eh_save_cmnd_info *sesci); +#endif /* _SCSI_SCSI_EH_H */
Signature · 1 line
1.5.3.1
drivers/scsi/scsi_error.c static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd) · line 608
Quoted 3 lines
drivers/scsi/scsi_error.c +3
-0+void scsi_eh_prep_cmnd (struct scsi_cmnd *scmd, +struct scsi_eh_save_cmnd_info *sesci,unsigned char *cmnd, +int cmnd_size,int copy_sense)
I think just struct "struct scsi_eh_save *save" is descriptive enough and almost fits on a line as well.. Also continuation of the prototype is indented by two tabs normally.
include/scsi/scsi_eh.h extern int scsi_get_sense_info_fld(const u8 * sense_buffer, int sb_len, · line 74
Quoted 7 lines
include/scsi/scsi_eh.h +7
-0+struct scsi_eh_save_cmnd_info { +int old_result; +enum dma_data_direction old_data_direction; +unsigned char old_cmd_len; +unsigned char old_cmnd[MAX_COMMAND_SIZE ]; + +void * old_buffer;
void *old_buffer;
include/scsi/scsi_eh.h extern int scsi_get_sense_info_fld(const u8 * sense_buffer, int sb_len, · line 80
Quoted 6 lines
include/scsi/scsi_eh.h +6
-0+unsigned old_bufflen; +unsigned short old_use_sg; +int old_resid; + +struct scatterlist sense_sgl; +};
I think you can kill the old prefixes in the struct, they're saved per defintion.
Except for these cosmetic details the patch looks fine to me, thanks a lot!
On Mon, 10 Sep 2007 17:23:52 +0300 Boaz Harrosh wrote:
Hi Boaz,
Just a small nit: several of the kernel-doc lines need ':' added. See below.
Quoted 11 lines
Sign-off-by Boaz Harrosh <[email protected]>
--- drivers/scsi/scsi_error.c | 133 +++++++++++++++++++++++++++------------------ include/scsi/scsi_eh.h | 23 ++++++++- 2 files changed, 102 insertions(+), 54 deletions(-)drivers/scsi/scsi_error.c +0
-0
drivers/scsi/scsi_error.c static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd) · line 595
Quoted 8 lines
drivers/scsi/scsi_error.c +2
-2@@ -590,42 +590,24 @@ static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd) }/** -* scsi_send_eh_cmnd - submit a scsi command as part of error recory +* scsi_prep_eh_cmnd - Save a scsi command info as part of error recory * @scmd: SCSI command structure to hijack -* @cmnd: CDB to send +* @sesci structure to save restore information
* @sesci:
Quoted 14 lines
drivers/scsi/scsi_error.c +4
-3+* @cmnd: CDB to send. Can be NULL if no new cmnd is needed * @cmnd_size: size in bytes of @cmnd -* @timeout: timeout for this request * @copy_sense: request sense data if set to 1 * **/ -static int scsi_send_eh_cmnd (struct scsi_cmnd *scmd,unsigned char *cmnd, -int cmnd_size,int timeout,int copy_sense) +void scsi_eh_prep_cmnd (struct scsi_cmnd *scmd, +struct scsi_eh_save_cmnd_info *sesci,unsigned char *cmnd, +int cmnd_size,int copy_sense) {
drivers/scsi/scsi_error.c static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, · line 663
Quoted 5 lines
drivers/scsi/scsi_error.c +4
-0@@ -676,7 +659,62 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, +/** +* scsi_restore_eh_cmnd - Restore a scsi command info as part of error recory +* @scmd: SCSI command structure to restore +* @sesci saved information from a coresponding call to scsi_prep_eh_cmnd
* @sesci:
drivers/scsi/scsi_error.c static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, · line 687
Quoted 8 lines
drivers/scsi/scsi_error.c +8
-0+* +* Undo any damage done by above scsi_prep_eh_cmnd(). +**/ +void scsi_eh_restore_cmnd (struct scsi_cmnd * scmd, +struct scsi_eh_save_cmnd_info *sesci) +{ +} +EXPORT_SYMBOL (scsi_eh_restore_cmnd);
Thanks.
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
PATCH 3/5 usb: transport.c use scsi_eh API in REQUEST_SENSE execution
In reply to Boaz Harrosh - Use new scsi_eh_prep/restor_cmnd() for synchronous REQUEST_SENSE invocation.
--- drivers/usb/storage/transport.c | 51 ++++++-------------------------------- 1 files changed, 8 insertions(+), 43 deletions(-)
drivers/usb/storage/transport.c +8 -43
@@ -50,7 +50,7 @@#include <linux/slab.h> #include <scsi/scsi.h> -#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_eh.h> #include <scsi/scsi_device.h> #include "usb.h"
@@ -580,62 +580,27 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)/* Now, if we need to do the auto-sense, let's do it */ if (need_auto_sense) {int temp_result; -void * old_request_buffer; -unsigned short old_sg; -unsigned old_request_bufflen; -unsigned char old_sc_data_direction; -unsigned char old_cmd_len; -unsigned char old_cmnd[MAX_COMMAND_SIZE ]; -int old_resid; +struct scsi_eh_save_cmnd_info sesci; +static unsigned char generic_sense[6 ] = + {REQUEST_SENSE ,0 ,0 ,0 ,0 ,0 };US_DEBUGP ("Issuing auto-REQUEST_SENSE\n" ); -/* save the old command */ -memcpy (old_cmnd, srb->cmnd,MAX_COMMAND_SIZE ); - old_cmd_len = srb->cmd_len; - -/* set the command and the LUN */ -memset (srb->cmnd,0 ,MAX_COMMAND_SIZE ); - srb->cmnd[0 ] =REQUEST_SENSE ; - srb->cmnd[1 ] = old_cmnd[1 ] &0xE0 ; - srb->cmnd[4 ] =18 ; - +scsi_eh_prep_cmnd (srb, &sesci, generic_sense, +sizeof (generic_sense),1 ); +/* FIXME: we must do the protocol translation here */ if (us->subclass ==US_SC_RBC || us->subclass ==US_SC_SCSI ) srb->cmd_len =6 ;else srb->cmd_len =12 ; -/* set the transfer direction */ - old_sc_data_direction = srb->sc_data_direction; - srb->sc_data_direction =DMA_FROM_DEVICE ; - -/* use the new buffer we have */ - old_request_buffer = srb->request_buffer; - srb->request_buffer = us->sensebuf; - -/* set the buffer length for transfer */ - old_request_bufflen = srb->request_bufflen; - srb->request_bufflen =US_SENSE_SIZE ; - -/* set up for no scatter-gather use */ - old_sg = srb->use_sg; - srb->use_sg =0 ; -/* issue the auto-sense command */ - old_resid = srb->resid; srb->resid =0 ; temp_result = us->transport (us->srb, us);/* let's clean up right away */ -memcpy (srb->sense_buffer, us->sensebuf,US_SENSE_SIZE ); - srb->resid = old_resid; - srb->request_buffer = old_request_buffer; - srb->request_bufflen = old_request_bufflen; - srb->use_sg = old_sg; - srb->sc_data_direction = old_sc_data_direction; - srb->cmd_len = old_cmd_len; -memcpy (srb->cmnd, old_cmnd,MAX_COMMAND_SIZE ); +scsi_eh_restore_cmnd (srb, &sesci);if (test_bit (US_FLIDX_TIMED_OUT , &us->flags)) {US_DEBUGP ("-- auto-sense aborted\n" );
Signature · 1 line
1.5.3.1
PATCH 4/5 NCR5380: Use scsi_eh API for REQUEST_SENSE invocation
In reply to Boaz Harrosh - Use new scsi_eh_prep/restor_cmnd() for synchronous REQUEST_SENSE invocation.
--- drivers/scsi/NCR5380.c | 25 +++++++++++-------------- drivers/scsi/NCR5380.h | 7 +++++++ drivers/scsi/atari_NCR5380.c | 25 ++++++++++--------------- drivers/scsi/sun3_NCR5380.c | 20 +++++++++----------- 4 files changed, 37 insertions(+), 40 deletions(-)
drivers/scsi/NCR5380.c +11 -14
@@ -1542,9 +1542,7 @@ part2: hostdata->connected = cmd; hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun); -if (cmd->SCp.ptr != (char *)cmd->sense_buffer) { -initialize_SCp (cmd); - } +initialize_SCp (cmd);return 0 ;
@@ -2280,19 +2278,18 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) { cmd->result = (cmd->result &0x00ffff ) | (DID_ERROR <<16 );#ifdef AUTOSENSE +if ((cmd->cmnd[0 ] ==REQUEST_SENSE ) && + hostdata->sesci.old_cmd_len) { +scsi_eh_restore_cmnd (cmd, &hostdata->sesci); + hostdata->sesci.old_cmd_len =0 ; + } +if ((cmd->cmnd[0 ] !=REQUEST_SENSE ) && (status_byte (cmd->SCp.Status) ==CHECK_CONDITION )) { +unsigned char cmnd[6 ] = {REQUEST_SENSE ,0 ,0 ,0 ,0 ,0 }; +scsi_eh_prep_cmnd (cmd, &hostdata->sesci, cmnd, +sizeof (cmnd),1 ); +dprintk (NDEBUG_AUTOSENSE , ("scsi%d : performing request sense\n" , instance->host_no)); - cmd->cmnd[0 ] =REQUEST_SENSE ; - cmd->cmnd[1 ] &=0xe0 ; - cmd->cmnd[2 ] =0 ; - cmd->cmnd[3 ] =0 ; - cmd->cmnd[4 ] =sizeof (cmd->sense_buffer); - cmd->cmnd[5 ] =0 ; - - cmd->SCp.buffer =NULL ; - cmd->SCp.buffers_residual =0 ; - cmd->SCp.ptr = (char *) cmd->sense_buffer; - cmd->SCp.this_residual =sizeof (cmd->sense_buffer);LIST (cmd, hostdata->issue_queue); cmd->host_scribble = (unsigned char *)
drivers/scsi/NCR5380.h +7 -0
@@ -30,6 +30,10 @@#include <linux/interrupt.h> +#ifdef AUTOSENSE +#include <scsi/scsi_eh.h> +#endif +#define NCR5380_PUBLIC_RELEASE 7#define NCR53C400_PUBLIC_RELEASE 2
@@ -281,6 +285,9 @@ struct NCR5380_hostdata {unsigned pendingr;unsigned pendingw;#endif +#ifdef AUTOSENSE +struct scsi_eh_save_cmnd_info sesci; +#endif };#ifdef __KERNEL__
drivers/scsi/atari_NCR5380.c +10 -15
@@ -2235,24 +2235,19 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance) cmd->result = (cmd->result &0x00ffff ) | (DID_ERROR <<16 );#ifdef AUTOSENSE +if ((cmd->cmnd[0 ] ==REQUEST_SENSE ) && + hostdata->sesci.old_cmd_len) { +scsi_eh_restore_cmnd (cmd, &hostdata->sesci); + hostdata->sesci.old_cmd_len =0 ; + } +if ((cmd->cmnd[0 ] !=REQUEST_SENSE ) && (status_byte (cmd->SCp.Status) ==CHECK_CONDITION )) { +unsigned char cmnd[6 ] = {REQUEST_SENSE ,0 ,0 ,0 ,0 ,0 }; +scsi_eh_prep_cmnd (cmd, &hostdata->sesci, cmnd, +sizeof (cmnd),1 ); +ASEN_PRINTK ("scsi%d: performing request sense\n" ,HOSTNO ); - cmd->cmnd[0 ] =REQUEST_SENSE ; - cmd->cmnd[1 ] &=0xe0 ; - cmd->cmnd[2 ] =0 ; - cmd->cmnd[3 ] =0 ; - cmd->cmnd[4 ] =sizeof (cmd->sense_buffer); - cmd->cmnd[5 ] =0 ; - cmd->cmd_len =COMMAND_SIZE (cmd->cmnd[0 ]); - - cmd->use_sg =0 ; -/* this is initialized from initialize_SCp -cmd->SCp.buffer = NULL; -cmd->SCp.buffers_residual = 0; -*/ - cmd->request_buffer = (char *) cmd->sense_buffer; - cmd->request_bufflen =sizeof (cmd->sense_buffer);local_irq_save (flags);LIST (cmd,hostdata->issue_queue);
drivers/scsi/sun3_NCR5380.c +9 -11
@@ -2254,25 +2254,23 @@ static void NCR5380_information_transfer (struct Scsi_Host *instance) cmd->result = (cmd->result &0x00ffff ) | (DID_ERROR <<16 );#ifdef AUTOSENSE +if ((cmd->cmnd[0 ] ==REQUEST_SENSE ) && + hostdata->sesci.old_cmd_len) { +scsi_eh_restore_cmnd (cmd, &hostdata->sesci); + hostdata->sesci.old_cmd_len =0 ; + } +if ((cmd->cmnd[0 ] !=REQUEST_SENSE ) && (status_byte (cmd->SCp.Status) ==CHECK_CONDITION )) { +unsigned char cmnd[6 ] = {REQUEST_SENSE ,0 ,0 ,0 ,0 ,0 }; +scsi_eh_prep_cmnd (cmd, &hostdata->sesci, cmnd, +sizeof (cmnd),1 );ASEN_PRINTK ("scsi%d: performing request sense\n" ,HOSTNO ); - cmd->cmnd[0 ] =REQUEST_SENSE ; - cmd->cmnd[1 ] &=0xe0 ; - cmd->cmnd[2 ] =0 ; - cmd->cmnd[3 ] =0 ; - cmd->cmnd[4 ] =sizeof (cmd->sense_buffer); - cmd->cmnd[5 ] =0 ; - cmd->cmd_len =COMMAND_SIZE (cmd->cmnd[0 ]); - - cmd->use_sg =0 ;/* this is initialized from initialize_SCp cmd->SCp.buffer = NULL; cmd->SCp.buffers_residual = 0; */ - cmd->request_buffer = (char *) cmd->sense_buffer; - cmd->request_bufflen =sizeof (cmd->sense_buffer);local_irq_save (flags);LIST (cmd,hostdata->issue_queue);
Signature · 1 line
1.5.3.1
PATCH 5/5 arm: fas216 Use scsi_eh API for REQUEST_SENSE invocation
In reply to Boaz Harrosh - Use new scsi_eh_prep/restor_cmnd() for synchronous REQUEST_SENSE invocation.
--- drivers/scsi/arm/fas216.c | 5 ++--- drivers/scsi/arm/fas216.h | 3 +++ 2 files changed, 5 insertions(+), 3 deletions(-)
drivers/scsi/arm/fas216.c +2 -3
@@ -2018,6 +2018,7 @@ static void fas216_rq_sns_done(FAS216_Info *info, struct scsi_cmnd *SCpnt,* the upper layers to process. This would have been set * correctly by fas216_std_done. */ +scsi_eh_restore_cmnd (SCpnt, &info->sesci); SCpnt->scsi_done (SCpnt); }
@@ -2103,6 +2104,7 @@ request_sense:if (SCpnt->cmnd[0 ] ==REQUEST_SENSE ) goto done; +scsi_eh_prep_cmnd (SCpnt, &info->sesci,NULL ,0 ,1 );fas216_log_target (info,LOG_CONNECT , SCpnt->device->id,"requesting sense" );memset (SCpnt->cmnd,0 ,sizeof (SCpnt->cmnd));
@@ -2117,9 +2119,6 @@ request_sense: SCpnt->SCp.phase =sizeof (SCpnt->sense_buffer); SCpnt->SCp.Message =0 ; SCpnt->SCp.Status =0 ; - SCpnt->request_bufflen =sizeof (SCpnt->sense_buffer); - SCpnt->sc_data_direction =DMA_FROM_DEVICE ; - SCpnt->use_sg =0 ; SCpnt->tag =0 ; SCpnt->host_scribble = (void *)fas216_rq_sns_done;
drivers/scsi/arm/fas216.h +3 -0
@@ -16,6 +16,8 @@#define NO_IRQ 255#endif +#include <scsi/scsi_eh.h> +#include "queue.h" #include "msgqueue.h"
@@ -311,6 +313,7 @@ typedef struct {/* miscellaneous */ int internal_done;/* flag to indicate request done */ +struct scsi_eh_save_cmnd_info *sesci;/* holds request sense restore info */ unsigned long magic_end; } FAS216_Info;
Signature · 1 line
1.5.3.1
Alan Stern
maintainerQuoted 10 lines · Boaz Harrosh
In motivation to abstract
scsi_cmndmembers and insulatedrivers/transportsfromscsi_cmndinternals. The last place left was theREQUEST_SENSEsequence when done synchronous, by drivers.Also all these drivers would do a use_sg==0 command invocation, preventing from doing cleanups on these
drivers/transports. So this patchset is left-overs from Christoph's 2.6.18 cleanups.
Quoted 4 lines
In this patchset I have re-factored
scsi_errorto make it possible for drivers to use an abstract (easy to use, I hope) API for invoking aREQUEST_SENSEcommand. The API is declared inscsi/scsi_eh.h
This is a good idea, but the implementation has a few problems.
A trivial problem is that quilt complains about patch 3, which leaves extra whitespace at the end of line 591 in transport.c.
More seriously, why make the caller define a static generic_sense array? Why not put the array in scsi_eh_prep_cmnd(), where it can be used whenever copy_sense is nonzero?
The line initializing the sense buffer to zero should be inside the copy_sense conditional block.
The code setting the LUN bits in scmd[1] is wrong. It should be like the code in scsi_dispatch_cmd(); i.e., those bits should not be set if the scsi_level is SCSI_UNKNOWN.
Finally, a really serious problem. The code sets the buffer length for the REQUEST SENSE command to be the length of scmd->sense_buffer, which is 96. But many USB devices won't work properly unless the requesed sense data length is 18. The appropriate adjustment must be added to transport.c in patch 3.
Alan Stern
Quoted 5 lines · Boaz Harrosh
In motivation to abstract
scsi_cmndmembers and insulatedrivers/transportsfromscsi_cmndinternals. The last place left was theREQUEST_SENSEsequence when done synchronous, by drivers.
This probably isn't serious, but I noticed one thing (beyond what Alan's analysis noted)...
I've always assumed that the scatterlist structs passed to an HCD were, themselves, allocated from DMA-able memory. That is, not just the transfer buffers themselves, but the struct scatterlist also.
In this implementation, the struct scatterlist used for the single-element transfer of the request sense buffer is part of the
struct scsi_eh_save_cmnd_info, which is allocated on the stack (for at least usb-storage). And, stack isn't DMA-able on all arches.
It is not a problem for usb-storage, since the struct scatterlists are processed in code into a series of URBs, so nobody actually does DMA the scatterlist structures. However, I don't know enough about the other HCDs to be certain about them.
Matt
Signature · 7 lines
Matthew Dharm Home: [email protected] Maintainer, Linux USB Mass Storage Driver Now payink attention, please. This is mouse. Click-click. Easy to use, da? Now you try... -- Pitr to Miranda User Friendly, 10/11/1998
Quoted 7 lines · Matthew Dharm
Quoted 5 lines · Boaz Harrosh
In motivation to abstract
scsi_cmndmembers and insulatedrivers/transportsfromscsi_cmndinternals. The last place left was theREQUEST_SENSEsequence when done synchronous, by drivers.
Quoted 6 lines
This probably isn't serious, but I noticed one thing (beyond what Alan's analysis noted)...
I've always assumed that the scatterlist structs passed to an HCD were, themselves, allocated from DMA-able memory. That is, not just the transfer buffers themselves, but the struct scatterlist also.
They are, but this is an artifact of the command allocation. Commands (as in the 6, 10 12 or 16 bytes of command sequence) are designed to be DMAable, meaning that everything that makes up a struct scsi_cmnd is automatically DMAable. However, the design is for the dma_mapped scatterlist to be converted to a form the underlying HBA can use. I don't currently know of any HBA whose descriptor format matches those of struct scatterlist, so I don't think there'll be any impact to putting the scatterlist in memory that might not be DMAable by the HBA.
Quoted 9 lines
In this implementation, the struct scatterlist used for the single-element transfer of the request sense buffer is part of the
structscsi_eh_save_cmnd_info, which is allocated on the stack (for at least usb-storage). And, stack isn't DMA-able on all arches.It is not a problem for usb-storage, since the struct scatterlists are processed in code into a series of URBs, so nobody actually does DMA the scatterlist structures. However, I don't know enough about the other HCDs to be certain about them.
James