Skip to contentSkip to conversation

sky2: restore multicast list on resume and other ops

PATCH Applied Stephen Hemminger 2 participants 2 messages Sep 5, 2007 – Sep 13, 2007 1 message not in the archive

Subsystems (2)
Networking Network drivers
lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Stephen Hemminger

author
#1 lore raw

PATCH 1/1 sky2: restore multicast list on resume and other ops

Need to restore multicast settings on resume and after 'ethtool -r'.

Signed-off-by Stephen Hemminger <[email protected]>
drivers/net/sky2.c +8 -1
@@ -149,6 +149,8 @@ static const char *yukon2_name[] = {
 	"FE",		/* 0xb7 */
 };
 
+static void sky2_set_multicast(struct net_device *dev);
+
 /* Access to external PHY */
 static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
 {

@@ -2900,8 +2902,10 @@ static int sky2_set_settings(struct net_
 	sky2->autoneg = ecmd->autoneg;
 	sky2->advertising = ecmd->advertising;
 
-	if (netif_running(dev))
+	if (netif_running(dev)) {
 		sky2_phy_reinit(sky2);
+		sky2_set_multicast(dev);
+	}
 
 	return 0;
 }

@@ -2994,6 +2998,7 @@ static int sky2_nway_reset(struct net_de
 		return -EINVAL;
 
 	sky2_phy_reinit(sky2);
+	sky2_set_multicast(dev);
 
 	return 0;
 }

@@ -4171,6 +4176,8 @@ static int sky2_resume(struct pci_dev *p
 				dev_close(dev);
 				goto out;
 			}
+
+			sky2_set_multicast(dev);
 		}
 	}