xen/netfront: Remove unneeded .resume callback
Subsystems (3)
PATCH 1/1 xen/netfront: Remove unneeded .resume callback
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot be cleanly done as the backend still holds those (it was not told to free the resources)
- it is not possible to resume driver operation as all the communication means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.
Fix this by not destroying communication channels/rings on driver resume.
--- drivers/net/xen-netfront.c | 17 ----------------- 1 file changed, 17 deletions(-)
drivers/net/xen-netfront.c +0 -17
@@ -1422,22 +1422,6 @@ static void xennet_disconnect_backend(struct netfront_info *info) } } -/** -* We are reconnecting to the backend, due to a suspend/resume, or a backend -* driver restart. We tear down our netif structure and recreate it, but -* leave the device-layer structures intact so that this is transparent to the -* rest of the kernel. -*/ -static int netfront_resume (struct xenbus_device *dev) -{ -struct netfront_info *info =dev_get_drvdata (&dev->dev); - -dev_dbg (&dev->dev,"%s\n" , dev->nodename); - -xennet_disconnect_backend (info); -return 0 ; -} -static int xen_net_read_mac (struct xenbus_device *dev,u8 mac[]) {char *s, *e, *macstr;
@@ -2185,7 +2169,6 @@ static struct xenbus_driver netfront_driver = { .ids = netfront_ids, .probe = netfront_probe, .remove = xennet_remove, - .resume = netfront_resume, .otherend_changed = netback_changed, };
Signature · 1 line
2.21.0
I am still confused about suspend/resume for the front drivers, for instance, block front [1] does implement full/proper reconnect on .resume, but net front only does this partially.
Could anyone please shed some light on suspend/resume design?
Thank you,
Oleksandr
Quoted 50 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot be cleanly done as the backend still holds those (it was not told to free the resources)
- it is not possible to resume driver operation as all the communication means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Fix this by not destroying communication channels/rings on driver resume.
Signed-off-by Oleksandr Andrushchenko <[email protected]>--- drivers/net/xen-netfront.c | 17 ----------------- 1 file changed, 17 deletions(-)drivers/net/xen-netfront.c +0
-16@@ -1422,22 +1422,6 @@ static void xennet_disconnect_backend(struct netfront_info *info) } } -/** -* We are reconnecting to the backend, due to a suspend/resume, or a backend -* driver restart. We tear down our netif structure and recreate it, but -* leave the device-layer structures intact so that this is transparent to the -* rest of the kernel. -*/ -static int netfront_resume (struct xenbus_device *dev) -{ -struct netfront_info *info =dev_get_drvdata (&dev->dev); - -dev_dbg (&dev->dev,"%s\n" , dev->nodename); - -xennet_disconnect_backend (info); -return 0 ; -} -static int xen_net_read_mac (struct xenbus_device *dev,u8 mac[]) {char *s, *e, *macstr;
drivers/net/xen-netfront.c static struct xenbus_driver netfront_driver = { · line 2174
Quoted 7 lines
drivers/net/xen-netfront.c +0
-1@@ -2185,7 +2169,6 @@ static struct xenbus_driver netfront_driver = { .ids = netfront_ids, .probe = netfront_probe, .remove = xennet_remove, - .resume = netfront_resume, .otherend_changed = netback_changed, };
[1] https://elixir.bootlin.com/linux/v5.0.2/source/drivers/block/xen-blkfront.c#L2072
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
I am still confused about suspend/resume for the front drivers, for instance, block front [1] does implement full/proper reconnect on .resume, but net front only does this partially.
Could anyone please shed some light on suspend/resume design?
Thank you,
Oleksandr
Quoted 50 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot be cleanly done as the backend still holds those (it was not told to free the resources)
- it is not possible to resume driver operation as all the communication means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Fix this by not destroying communication channels/rings on driver resume.
Signed-off-by Oleksandr Andrushchenko <[email protected]>--- drivers/net/xen-netfront.c | 17 ----------------- 1 file changed, 17 deletions(-)drivers/net/xen-netfront.c +0
-16@@ -1422,22 +1422,6 @@ static void xennet_disconnect_backend(struct netfront_info *info) } } -/** -* We are reconnecting to the backend, due to a suspend/resume, or a backend -* driver restart. We tear down our netif structure and recreate it, but -* leave the device-layer structures intact so that this is transparent to the -* rest of the kernel. -*/ -static int netfront_resume (struct xenbus_device *dev) -{ -struct netfront_info *info =dev_get_drvdata (&dev->dev); - -dev_dbg (&dev->dev,"%s\n" , dev->nodename); - -xennet_disconnect_backend (info); -return 0 ; -} -static int xen_net_read_mac (struct xenbus_device *dev,u8 mac[]) {char *s, *e, *macstr;
drivers/net/xen-netfront.c static struct xenbus_driver netfront_driver = { · line 2174
Quoted 7 lines
drivers/net/xen-netfront.c +0
-1@@ -2185,7 +2169,6 @@ static struct xenbus_driver netfront_driver = { .ids = netfront_ids, .probe = netfront_probe, .remove = xennet_remove, - .resume = netfront_resume, .otherend_changed = netback_changed, };
[1] https://elixir.bootlin.com/linux/v5.0.2/source/drivers/block/xen-blkfront.c#L2072
Quoted 13 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot be cleanly done as the backend still holds those (it was not told to free the resources)
- it is not possible to resume driver operation as all the communication means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.
What do you mean? Are you saying that after resume you lose connectivity?
-boris
Quoted 37 lines
Fix this by not destroying communication channels/rings on driver resume.
Signed-off-by Oleksandr Andrushchenko <[email protected]>--- drivers/net/xen-netfront.c | 17 ----------------- 1 file changed, 17 deletions(-)drivers/net/xen-netfront.c +0
-16@@ -1422,22 +1422,6 @@ static void xennet_disconnect_backend(struct netfront_info *info) } } -/** -* We are reconnecting to the backend, due to a suspend/resume, or a backend -* driver restart. We tear down our netif structure and recreate it, but -* leave the device-layer structures intact so that this is transparent to the -* rest of the kernel. -*/ -static int netfront_resume (struct xenbus_device *dev) -{ -struct netfront_info *info =dev_get_drvdata (&dev->dev); - -dev_dbg (&dev->dev,"%s\n" , dev->nodename); - -xennet_disconnect_backend (info); -return 0 ; -} -static int xen_net_read_mac (struct xenbus_device *dev,u8 mac[]) {char *s, *e, *macstr;
drivers/net/xen-netfront.c static struct xenbus_driver netfront_driver = { · line 2174
Quoted 7 lines
drivers/net/xen-netfront.c +0
-1@@ -2185,7 +2169,6 @@ static struct xenbus_driver netfront_driver = { .ids = netfront_ids, .probe = netfront_probe, .remove = xennet_remove, - .resume = netfront_resume, .otherend_changed = netback_changed, };
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 13 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot be cleanly done as the backend still holds those (it was not told to free the resources)
- it is not possible to resume driver operation as all the communication means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.
What do you mean? Are you saying that after resume you lose connectivity?
-boris
Quoted 44 lines
Fix this by not destroying communication channels/rings on driver resume.
Signed-off-by Oleksandr Andrushchenko <[email protected]>--- drivers/net/xen-netfront.c | 17 ----------------- 1 file changed, 17 deletions(-)drivers/net/xen-netfront.c +0
-17@@ -1422,22 +1422,6 @@ static void xennet_disconnect_backend(struct netfront_info *info) } } -/** -* We are reconnecting to the backend, due to a suspend/resume, or a backend -* driver restart. We tear down our netif structure and recreate it, but -* leave the device-layer structures intact so that this is transparent to the -* rest of the kernel. -*/ -static int netfront_resume (struct xenbus_device *dev) -{ -struct netfront_info *info =dev_get_drvdata (&dev->dev); - -dev_dbg (&dev->dev,"%s\n" , dev->nodename); - -xennet_disconnect_backend (info); -return 0 ; -} -static int xen_net_read_mac (struct xenbus_device *dev,u8 mac[]) {char *s, *e, *macstr;@@ -2185,7 +2169,6 @@ static struct xenbus_driver netfront_driver = { .ids = netfront_ids, .probe = netfront_probe, .remove = xennet_remove, - .resume = netfront_resume, .otherend_changed = netback_changed, };
Quoted 15 lines · Boris Ostrovsky
Quoted 13 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot be cleanly done as the backend still holds those (it was not told to free the resources)
- it is not possible to resume driver operation as all the communication means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.
Quoted 1 line
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is no way its state machine can help recovering.
Quoted 39 lines
-boris
Quoted 35 lines
Fix this by not destroying communication channels/rings on driver resume.
Signed-off-by Oleksandr Andrushchenko <[email protected]>--- drivers/net/xen-netfront.c | 17 ----------------- 1 file changed, 17 deletions(-)drivers/net/xen-netfront.c +0
-16@@ -1422,22 +1422,6 @@ static void xennet_disconnect_backend(struct netfront_info *info) } } -/** -* We are reconnecting to the backend, due to a suspend/resume, or a backend -* driver restart. We tear down our netif structure and recreate it, but -* leave the device-layer structures intact so that this is transparent to the -* rest of the kernel. -*/ -static int netfront_resume (struct xenbus_device *dev) -{ -struct netfront_info *info =dev_get_drvdata (&dev->dev); - -dev_dbg (&dev->dev,"%s\n" , dev->nodename); - -xennet_disconnect_backend (info); -return 0 ; -} -static int xen_net_read_mac (struct xenbus_device *dev,u8 mac[]) {char *s, *e, *macstr;
Quoted 8 lines
drivers/net/xen-netfront.c static struct xenbus_driver netfront_driver = { · line 2174
Quoted 8 lines
drivers/net/xen-netfront.c +0
-1@@ -2185,7 +2169,6 @@ static struct xenbus_driver netfront_driver = { .ids = netfront_ids, .probe = netfront_probe, .remove = xennet_remove, - .resume = netfront_resume, .otherend_changed = netback_changed, };
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 15 lines · Boris Ostrovsky
Quoted 13 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot be cleanly done as the backend still holds those (it was not told to free the resources)
- it is not possible to resume driver operation as all the communication means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.
Quoted 1 line
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is no way its state machine can help recovering.
Quoted 47 lines
-boris
Quoted 43 lines
Fix this by not destroying communication channels/rings on driver resume.
Signed-off-by Oleksandr Andrushchenko <[email protected]>--- drivers/net/xen-netfront.c | 17 ----------------- 1 file changed, 17 deletions(-)drivers/net/xen-netfront.c +0
-17@@ -1422,22 +1422,6 @@ static void xennet_disconnect_backend(struct netfront_info *info) } } -/** -* We are reconnecting to the backend, due to a suspend/resume, or a backend -* driver restart. We tear down our netif structure and recreate it, but -* leave the device-layer structures intact so that this is transparent to the -* rest of the kernel. -*/ -static int netfront_resume (struct xenbus_device *dev) -{ -struct netfront_info *info =dev_get_drvdata (&dev->dev); - -dev_dbg (&dev->dev,"%s\n" , dev->nodename); - -xennet_disconnect_backend (info); -return 0 ; -} -static int xen_net_read_mac (struct xenbus_device *dev,u8 mac[]) {char *s, *e, *macstr;@@ -2185,7 +2169,6 @@ static struct xenbus_driver netfront_driver = { .ids = netfront_ids, .probe = netfront_probe, .remove = xennet_remove, - .resume = netfront_resume, .otherend_changed = netback_changed, };
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 15 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not told to free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.
Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes xennet_connect().
-boris
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 15 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not told to free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.
Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes xennet_connect().
-boris
Quoted 27 lines · Boris Ostrovsky
Quoted 17 lines · Oleksandr Andrushchenko
Quoted 16 lines · Boris Ostrovsky
Quoted 15 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not told to free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.
Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().
Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem > /sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?
I can see no way backend may want enter XenbusStateInitWait in my use-case as it simply doesn't know we want him to.
Quoted 4 lines
-boris
Thank you,
Oleksandr
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 27 lines · Boris Ostrovsky
Quoted 17 lines · Oleksandr Andrushchenko
Quoted 16 lines · Boris Ostrovsky
Quoted 15 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not told to free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.
Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().
Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem > /sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?
I can see no way backend may want enter XenbusStateInitWait in my use-case as it simply doesn't know we want him to.
Quoted 4 lines
-boris
Thank you,
Oleksandr
Quoted 32 lines · Oleksandr Andrushchenko
Quoted 28 lines · Boris Ostrovsky
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not told to
free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().
Quoted 7 lines
Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?
xl save / xl restore
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.
Yours looks like ACPI path, I don't know how well it was tested TBH.
-boris
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 32 lines · Oleksandr Andrushchenko
Quoted 28 lines · Boris Ostrovsky
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not told to
free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().
Quoted 7 lines
Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?
xl save / xl restore
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.
Yours looks like ACPI path, I don't know how well it was tested TBH.
-boris
Quoted 40 lines · Boris Ostrovsky
Quoted 31 lines · Oleksandr Andrushchenko
Quoted 27 lines · Boris Ostrovsky
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not
told to
free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().Quoted 7 lines
Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?
Quoted 7 lines
xl save / xl restore
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
Hm, so it does work for your use-case, but doesn't for mine.
What would be the best way forward?
1. Implement .resume properly as, for example, block front does [1]
2. Remove .resume completely: this does work as long as backend doesn't change anything
I am still a bit unsure if we really need to re-initialize rings, re-read front's config from
Xenstore etc - what changes on backend side are expected when we resume the front driver?
Quoted 3 lines
-boris
Thank you,
Oleksandr
[1] https://elixir.bootlin.com/linux/v5.0.2/source/drivers/block/xen-blkfront.c#L2072
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 40 lines · Boris Ostrovsky
Quoted 31 lines · Oleksandr Andrushchenko
Quoted 27 lines · Boris Ostrovsky
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not
told to
free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().Quoted 7 lines
Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?
Quoted 7 lines
xl save / xl restore
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
Hm, so it does work for your use-case, but doesn't for mine.
What would be the best way forward?
1. Implement .resume properly as, for example, block front does [1]
2. Remove .resume completely: this does work as long as backend doesn't change anything
I am still a bit unsure if we really need to re-initialize rings, re-read front's config from
Xenstore etc - what changes on backend side are expected when we resume the front driver?
Quoted 3 lines
-boris
Thank you,
Oleksandr
[1] https://elixir.bootlin.com/linux/v5.0.2/source/drivers/block/xen-blkfront.c#L2072
Quoted 52 lines · Oleksandr Andrushchenko
Quoted 43 lines · Boris Ostrovsky
Quoted 33 lines · Oleksandr Andrushchenko
Quoted 28 lines · Boris Ostrovsky
Quoted 20 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not told to
free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Quoted 7 lines
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend
of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 4 lines
My tree is about a month old so perhaps there is some sort of regression
but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causesxennet_connect().Quoted 8 lines
Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend
and what you do to resume it?Quoted 7 lines
xl save / xl restore
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
Quoted 8 lines
Hm, so it does work for your use-case, but doesn't for mine.
What would be the best way forward?
1. Implement .resume properly as, for example, block front does [1]
2. Remove .resume completely: this does work as long as backend doesn't change anything
For save/restore (migration) there is no guarantee that the new backend has the same set of features.
Quoted 6 lines
I am still a bit unsure if we really need to re-initialize rings, re-read front's config from
Xenstore etc - what changes on backend side are expected when we resume the front driver?
Number of queues, for example. Or things in xennet_fix_features().
-boris
Quoted 5 lines
Quoted 4 lines
-boris
Quoted 8 lines
Thank you,
Oleksandr
[1]
https://elixir.bootlin.com/linux/v5.0.2/source/drivers/block/xen-blkfront.c#L2072
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 52 lines · Oleksandr Andrushchenko
Quoted 43 lines · Boris Ostrovsky
Quoted 33 lines · Oleksandr Andrushchenko
Quoted 28 lines · Boris Ostrovsky
Quoted 20 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not told to
free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Quoted 7 lines
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend
of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 4 lines
My tree is about a month old so perhaps there is some sort of regression
but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causesxennet_connect().Quoted 8 lines
Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend
and what you do to resume it?Quoted 7 lines
xl save / xl restore
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
Quoted 8 lines
Hm, so it does work for your use-case, but doesn't for mine.
What would be the best way forward?
1. Implement .resume properly as, for example, block front does [1]
2. Remove .resume completely: this does work as long as backend doesn't change anything
For save/restore (migration) there is no guarantee that the new backend has the same set of features.
Quoted 6 lines
I am still a bit unsure if we really need to re-initialize rings, re-read front's config from
Xenstore etc - what changes on backend side are expected when we resume the front driver?
Number of queues, for example. Or things in xennet_fix_features().
-boris
Quoted 13 lines
Quoted 4 lines
-boris
Thank you,
Oleksandr
[1]
https://elixir.bootlin.com/linux/v5.0.2/source/drivers/block/xen-blkfront.c#L2072
Quoted 61 lines · Boris Ostrovsky
Quoted 49 lines · Oleksandr Andrushchenko
Quoted 42 lines · Boris Ostrovsky
Quoted 33 lines · Oleksandr Andrushchenko
Quoted 28 lines · Boris Ostrovsky
Quoted 20 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not
told to
free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Quoted 7 lines
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend
of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 4 lines
My tree is about a month old so perhaps there is some sort of regression
but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causesxennet_connect().Quoted 8 lines
Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend
and what you do to resume it?Quoted 6 lines
xl save / xl restore
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
Quoted 8 lines
Hm, so it does work for your use-case, but doesn't for mine.
What would be the best way forward?
1. Implement .resume properly as, for example, block front does [1]
2. Remove .resume completely: this does work as long as backend doesn't change anything
For save/restore (migration) there is no guarantee that the new backend has the same set of features.
Quoted 7 lines
Quoted 5 lines
I am still a bit unsure if we really need to re-initialize rings, re-read front's config from
Xenstore etc - what changes on backend side are expected when we resume the front driver?
Number of queues, for example. Or things in
xennet_fix_features().
Ok, so it seems I have no choice, but implement proper .resume then )
Quoted 2 lines
-boris
Thank you!
Quoted 10 lines
Quoted 10 lines
Quoted 2 lines
-boris
Thank you,
Oleksandr
[1]
https://elixir.bootlin.com/linux/v5.0.2/source/drivers/block/xen-blkfront.c#L2072
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 61 lines · Boris Ostrovsky
Quoted 49 lines · Oleksandr Andrushchenko
Quoted 42 lines · Boris Ostrovsky
Quoted 33 lines · Oleksandr Andrushchenko
Quoted 28 lines · Boris Ostrovsky
Quoted 20 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not
told to
free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Quoted 7 lines
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend
of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 4 lines
My tree is about a month old so perhaps there is some sort of regression
but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causesxennet_connect().Quoted 8 lines
Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend
and what you do to resume it?Quoted 6 lines
xl save / xl restore
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
Quoted 8 lines
Hm, so it does work for your use-case, but doesn't for mine.
What would be the best way forward?
1. Implement .resume properly as, for example, block front does [1]
2. Remove .resume completely: this does work as long as backend doesn't change anything
For save/restore (migration) there is no guarantee that the new backend has the same set of features.
Quoted 7 lines
Quoted 5 lines
I am still a bit unsure if we really need to re-initialize rings, re-read front's config from
Xenstore etc - what changes on backend side are expected when we resume the front driver?
Number of queues, for example. Or things in
xennet_fix_features().
Ok, so it seems I have no choice, but implement proper .resume then )
Quoted 2 lines
-boris
Thank you!
Quoted 10 lines
Quoted 10 lines
Quoted 2 lines
-boris
Thank you,
Oleksandr
[1]
https://elixir.bootlin.com/linux/v5.0.2/source/drivers/block/xen-blkfront.c#L2072
Hi,
Quoted 42 lines · Boris Ostrovsky
Quoted 32 lines · Oleksandr Andrushchenko
Quoted 28 lines · Boris Ostrovsky
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not
told to
free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().Quoted 7 lines
Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?
Quoted 8 lines
xl save / xl restore
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
I remember a series from amazon [1] that plays around suspend and hibernation. The patch [2] leads me to think that guest triggered suspend/resume does not work properly. It looks like the series has never been fully reviewed. Not sure why...
Anyway, from my understanding this series may solve Oleksandr issue. However, this would only address the common code side. AFAIK Oleksandr is targeting Arm platform. If so, I think this would require more work than this series. Arm code still miss few bits properly suspend/resume arch specific code (see [2]).
I have a branch on my git to track the series. However, they never have been resent after Ian Campbell left Citrix. I would be happy to review them if someone wants to pick them up and repost them.
Cheers,
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00823.html
Quoted 9 lines
-boris
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Signature · 6 lines
Julien Grall _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Hi,
Quoted 42 lines · Boris Ostrovsky
Quoted 32 lines · Oleksandr Andrushchenko
Quoted 28 lines · Boris Ostrovsky
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not
told to
free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().Quoted 7 lines
Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?
Quoted 8 lines
xl save / xl restore
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
I remember a series from amazon [1] that plays around suspend and hibernation. The patch [2] leads me to think that guest triggered suspend/resume does not work properly. It looks like the series has never been fully reviewed. Not sure why...
Anyway, from my understanding this series may solve Oleksandr issue. However, this would only address the common code side. AFAIK Oleksandr is targeting Arm platform. If so, I think this would require more work than this series. Arm code still miss few bits properly suspend/resume arch specific code (see [2]).
I have a branch on my git to track the series. However, they never have been resent after Ian Campbell left Citrix. I would be happy to review them if someone wants to pick them up and repost them.
Cheers,
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00823.html
Quoted 9 lines
-boris
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Signature · 1 line
Julien Grall
+Amazon
pls see inline
Quoted 47 lines · Julien Grall
Hi,
Quoted 44 lines · Boris Ostrovsky
Quoted 32 lines · Oleksandr Andrushchenko
Quoted 28 lines · Boris Ostrovsky
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not told to
free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().Quoted 7 lines
Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?xl save / xl restore
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
I remember a series from amazon [1] that plays around suspend and hibernation. The patch [2] leads me to think that guest triggered suspend/resume does not work properly. It looks like the series has never been fully reviewed. Not sure why...
Julien, thanks a lot for bringing these patches to our attention which we obviously missed.
Quoted 5 lines
Anyway, from my understanding this series may solve Oleksandr issue. However, this would only address the common code side. AFAIK Oleksandr is targeting Arm platform. If so, I think this would require more work than this series. Arm code still miss few bits properly suspend/resume arch specific code (see [2]).
I have a branch on my git to track the series. However, they never have been resent after Ian Campbell left Citrix. I would be happy to review them if someone wants to pick them up and repost them.
First of all, let me make it clear that we are interested in hibernation long term, so it would be desirable to re-use as much work form resume/suspend as we can. But, we see it as a step by step work, e.g. first S2RAM and later on hibernation.
Let me clarify the immediate use-case that we have, so it is easier to understand what we want and what we don't at the moment. We are about to continue work started by Mirela/Xilinx on Suspend-to-RAM for ARM [3] and we made number of assumptions:
1. We are talking about *system* suspend, e.g. the goal is to suspend all the components of the system and Xen itself at once. Think about this as fast-boot and/or energy saving feature if you will.
2. With suspend/resume there is no intention to migrate VMs to any other host.
3. Most probably configuration of the back/front won't change between suspend/resume. But long term we are also thinking for supporting suspend/resume in its broader meaning, e.g. what is probably what you mean by suspend/resume.
Given that, we think that we don't need Xen support to save grants, page tables and other VM's context on suspend at least at the first stage as we are implementing not a fully blown suspend/resume, but only S2RAM part of it which is much more simpler than a generic suspend implementation. We only need changes to Linux kernel frontend drivers from [1] - the piece that we miss is suspend/resume implementation in the netfront driver. What is more, as we are not changing back/front configuration, we can even live with empty .resume/.suspend frontend's callbacks because event channels, rings etc. are "statically" allocated in our use-case at the first system start (cold boot). And indeed, tests show that waking domains in the right order do allow that.
So, frankly, from [3] we are immediately interested in implementing .resume/.suspend, not even freeze/thaw/restore callbacks: if Amazon has will and capacity to continue working on [3] then once that gets into the upstream it also solves our S2RAM use-case, but if not then we can probably re-work netfront patch and only provide .resume/.suspend callbacks which we need for now (remember our very specific use-case which can survive suspend without callbacks implemented).
IMO, patches at [2] seem to be useful while implementing generic suspend/resume and can be postponed for S2RAM.
Julien/Juergen/Boris/Amazon - could you please express your view on the above? Is it acceptable that for now we only take re-worked netfront patch from [3] with full implementation in mind for later (we reuse code for .resume/.suspend)?
Quoted 6 lines
Cheers,
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00823.html
[3] https://lists.xenproject.org/archives/html/xen-devel/2018-11/msg01093.html
Quoted 10 lines
Quoted 9 lines
-boris
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Thank you,
Oleksandr
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
+Amazon
pls see inline
Quoted 47 lines · Julien Grall
Hi,
Quoted 44 lines · Boris Ostrovsky
Quoted 32 lines · Oleksandr Andrushchenko
Quoted 28 lines · Boris Ostrovsky
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not told to
free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().Quoted 7 lines
Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?xl save / xl restore
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
I remember a series from amazon [1] that plays around suspend and hibernation. The patch [2] leads me to think that guest triggered suspend/resume does not work properly. It looks like the series has never been fully reviewed. Not sure why...
Julien, thanks a lot for bringing these patches to our attention which we obviously missed.
Quoted 5 lines
Anyway, from my understanding this series may solve Oleksandr issue. However, this would only address the common code side. AFAIK Oleksandr is targeting Arm platform. If so, I think this would require more work than this series. Arm code still miss few bits properly suspend/resume arch specific code (see [2]).
I have a branch on my git to track the series. However, they never have been resent after Ian Campbell left Citrix. I would be happy to review them if someone wants to pick them up and repost them.
First of all, let me make it clear that we are interested in hibernation long term, so it would be desirable to re-use as much work form resume/suspend as we can. But, we see it as a step by step work, e.g. first S2RAM and later on hibernation.
Let me clarify the immediate use-case that we have, so it is easier to understand what we want and what we don't at the moment. We are about to continue work started by Mirela/Xilinx on Suspend-to-RAM for ARM [3] and we made number of assumptions:
1. We are talking about *system* suspend, e.g. the goal is to suspend all the components of the system and Xen itself at once. Think about this as fast-boot and/or energy saving feature if you will.
2. With suspend/resume there is no intention to migrate VMs to any other host.
3. Most probably configuration of the back/front won't change between suspend/resume. But long term we are also thinking for supporting suspend/resume in its broader meaning, e.g. what is probably what you mean by suspend/resume.
Given that, we think that we don't need Xen support to save grants, page tables and other VM's context on suspend at least at the first stage as we are implementing not a fully blown suspend/resume, but only S2RAM part of it which is much more simpler than a generic suspend implementation. We only need changes to Linux kernel frontend drivers from [1] - the piece that we miss is suspend/resume implementation in the netfront driver. What is more, as we are not changing back/front configuration, we can even live with empty .resume/.suspend frontend's callbacks because event channels, rings etc. are "statically" allocated in our use-case at the first system start (cold boot). And indeed, tests show that waking domains in the right order do allow that.
So, frankly, from [3] we are immediately interested in implementing .resume/.suspend, not even freeze/thaw/restore callbacks: if Amazon has will and capacity to continue working on [3] then once that gets into the upstream it also solves our S2RAM use-case, but if not then we can probably re-work netfront patch and only provide .resume/.suspend callbacks which we need for now (remember our very specific use-case which can survive suspend without callbacks implemented).
IMO, patches at [2] seem to be useful while implementing generic suspend/resume and can be postponed for S2RAM.
Julien/Juergen/Boris/Amazon - could you please express your view on the above? Is it acceptable that for now we only take re-worked netfront patch from [3] with full implementation in mind for later (we reuse code for .resume/.suspend)?
Quoted 6 lines
Cheers,
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00823.html
[3] https://lists.xenproject.org/archives/html/xen-devel/2018-11/msg01093.html
Quoted 10 lines
Quoted 9 lines
-boris
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Thank you,
Oleksandr
Quoted 2 lines · Oleksandr Andrushchenko
+Amazon
pls see inline
Hi Oleksandr,
Let me add some comments as the original author of the series.
Quoted 63 lines · Julien Grall
Quoted 47 lines
Hi,
Quoted 44 lines · Boris Ostrovsky
Quoted 32 lines · Oleksandr Andrushchenko
Quoted 28 lines · Boris Ostrovsky
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not told to
free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().Quoted 7 lines
Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?xl save / xl restore
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
I remember a series from amazon [1] that plays around suspend and hibernation. The patch [2] leads me to think that guest triggered suspend/resume does not work properly. It looks like the series has never been fully reviewed. Not sure why...
Julien, thanks a lot for bringing these patches to our attention which we obviously missed.
Quoted 5 lines
Anyway, from my understanding this series may solve Oleksandr issue. However, this would only address the common code side. AFAIK Oleksandr is targeting Arm platform. If so, I think this would require more work than this series. Arm code still miss few bits properly suspend/resume arch specific code (see [2]).
I have a branch on my git to track the series. However, they never have been resent after Ian Campbell left Citrix. I would be happy to review them if someone wants to pick them up and repost them.
Quoted 13 lines
First of all, let me make it clear that we are interested in hibernation long term, so it would be desirable to re-use as much work form resume/suspend as we can. But, we see it as a step by step work, e.g. first S2RAM and later on hibernation.
Let me clarify the immediate use-case that we have, so it is easier to understand what we want and what we don't at the moment. We are about to continue work started by Mirela/Xilinx on Suspend-to-RAM for ARM [3] and we made number of assumptions:
1. We are talking about *system* suspend, e.g. the goal is to suspend all the components of the system and Xen itself at once. Think about this as fast-boot and/or energy saving feature if you will.
2. With suspend/resume there is no intention to migrate VMs to any other host.
3. Most probably configuration of the back/front won't change between suspend/resume. But long term we are also thinking for supporting suspend/resume in its broader meaning, e.g. what is probably what you mean by suspend/resume.
AFAIK .suspend and .resume callbacks in frontend drivers are specifically for xl save/restore case rather than the normal "system" suspend. i.e. The former is Boris' case and something I called "Xen suspend" in the patch series, the latter should be your interest and called "ACPI path" here, and I referred to as "PM suspend". They are very different code paths, see drivers/xen/manage.c for details of Xen suspend.
Quoted 10 lines
Given that, we think that we don't need Xen support to save grants, page tables and other VM's context on suspend at least at the first stage as we are implementing not a fully blown suspend/resume, but only S2RAM part of it which is much more simpler than a generic suspend implementation. We only need changes to Linux kernel frontend drivers from [1] - the piece that we miss is suspend/resume implementation in the netfront driver. What is more, as we are not changing back/front configuration, we can even live with empty .resume/.suspend frontend's callbacks because event channels, rings etc. are "statically" allocated in our use-case at the first system start (cold boot). And indeed, tests show that waking domains in the right order do allow that.
So, frankly, from [3] we are immediately interested in implementing .resume/.suspend, not
If you just (re)implement .suspend and .resume so without taking care of Xen suspend, you can easily break the existing functionality. The patch series introduced .freeze and .restore callbacks for both PM suspend and hibernation, and kept .suspend (not implemented in most frontend though) and .resume with no changes for Xen suspend.
Note that xenbus has mapped freeze/thaw/restore events to suspend, resume and cancel callbacks to handle "checkpoint" case[4]. This was a bit tricky and led me to the design to have the separate set of callbacks at each frontend driver level[5]. You might need to consider a similar approach even if your immediate interest at the moment is PM suspend.
Quoted 11 lines
even freeze/thaw/restore callbacks: if Amazon has will and capacity to continue working on [3] then once that gets into the upstream it also solves our S2RAM use-case, but if not then we can probably re-work netfront patch and only provide .resume/.suspend callbacks which we need for now (remember our very specific use-case which can survive suspend without callbacks implemented).
IMO, patches at [2] seem to be useful while implementing generic suspend/resume and can be postponed for S2RAM.Julien/Juergen/Boris/Amazon - could you please express your view on the above? Is it acceptable that for now we only take re-worked netfront patch from [3] with full implementation in mind for later (we reuse code for .resume/.suspend)?
In fact, Anchal has taken over my initial work and she may want to chime in here.
That said, I'd be very happy to review patches if you come up with your own ones, so feel free to add me in that case.
Quoted 7 lines
Quoted 6 lines
Cheers,
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00823.html
[3] https://lists.xenproject.org/archives/html/xen-devel/2018-11/msg01093.html
[4] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b3e96c0c756211e805c6941d4a6e5f6e1995cb6b
[5] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00825.html
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
-boris
Quoted 8 lines
Quoted 6 lines
Quoted 5 lines
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-develThank you,
Oleksandr
Thanks,
Munehisa
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 2 lines · Oleksandr Andrushchenko
+Amazon
pls see inline
Hi Oleksandr,
Let me add some comments as the original author of the series.
Quoted 63 lines · Julien Grall
Quoted 47 lines
Hi,
Quoted 44 lines · Boris Ostrovsky
Quoted 32 lines · Oleksandr Andrushchenko
Quoted 28 lines · Boris Ostrovsky
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not told to
free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().Quoted 7 lines
Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?xl save / xl restore
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
I remember a series from amazon [1] that plays around suspend and hibernation. The patch [2] leads me to think that guest triggered suspend/resume does not work properly. It looks like the series has never been fully reviewed. Not sure why...
Julien, thanks a lot for bringing these patches to our attention which we obviously missed.
Quoted 5 lines
Anyway, from my understanding this series may solve Oleksandr issue. However, this would only address the common code side. AFAIK Oleksandr is targeting Arm platform. If so, I think this would require more work than this series. Arm code still miss few bits properly suspend/resume arch specific code (see [2]).
I have a branch on my git to track the series. However, they never have been resent after Ian Campbell left Citrix. I would be happy to review them if someone wants to pick them up and repost them.
Quoted 13 lines
First of all, let me make it clear that we are interested in hibernation long term, so it would be desirable to re-use as much work form resume/suspend as we can. But, we see it as a step by step work, e.g. first S2RAM and later on hibernation.
Let me clarify the immediate use-case that we have, so it is easier to understand what we want and what we don't at the moment. We are about to continue work started by Mirela/Xilinx on Suspend-to-RAM for ARM [3] and we made number of assumptions:
1. We are talking about *system* suspend, e.g. the goal is to suspend all the components of the system and Xen itself at once. Think about this as fast-boot and/or energy saving feature if you will.
2. With suspend/resume there is no intention to migrate VMs to any other host.
3. Most probably configuration of the back/front won't change between suspend/resume. But long term we are also thinking for supporting suspend/resume in its broader meaning, e.g. what is probably what you mean by suspend/resume.
AFAIK .suspend and .resume callbacks in frontend drivers are specifically for xl save/restore case rather than the normal "system" suspend. i.e. The former is Boris' case and something I called "Xen suspend" in the patch series, the latter should be your interest and called "ACPI path" here, and I referred to as "PM suspend". They are very different code paths, see drivers/xen/manage.c for details of Xen suspend.
Quoted 10 lines
Given that, we think that we don't need Xen support to save grants, page tables and other VM's context on suspend at least at the first stage as we are implementing not a fully blown suspend/resume, but only S2RAM part of it which is much more simpler than a generic suspend implementation. We only need changes to Linux kernel frontend drivers from [1] - the piece that we miss is suspend/resume implementation in the netfront driver. What is more, as we are not changing back/front configuration, we can even live with empty .resume/.suspend frontend's callbacks because event channels, rings etc. are "statically" allocated in our use-case at the first system start (cold boot). And indeed, tests show that waking domains in the right order do allow that.
So, frankly, from [3] we are immediately interested in implementing .resume/.suspend, not
If you just (re)implement .suspend and .resume so without taking care of Xen suspend, you can easily break the existing functionality. The patch series introduced .freeze and .restore callbacks for both PM suspend and hibernation, and kept .suspend (not implemented in most frontend though) and .resume with no changes for Xen suspend.
Note that xenbus has mapped freeze/thaw/restore events to suspend, resume and cancel callbacks to handle "checkpoint" case[4]. This was a bit tricky and led me to the design to have the separate set of callbacks at each frontend driver level[5]. You might need to consider a similar approach even if your immediate interest at the moment is PM suspend.
Quoted 11 lines
even freeze/thaw/restore callbacks: if Amazon has will and capacity to continue working on [3] then once that gets into the upstream it also solves our S2RAM use-case, but if not then we can probably re-work netfront patch and only provide .resume/.suspend callbacks which we need for now (remember our very specific use-case which can survive suspend without callbacks implemented).
IMO, patches at [2] seem to be useful while implementing generic suspend/resume and can be postponed for S2RAM.Julien/Juergen/Boris/Amazon - could you please express your view on the above? Is it acceptable that for now we only take re-worked netfront patch from [3] with full implementation in mind for later (we reuse code for .resume/.suspend)?
In fact, Anchal has taken over my initial work and she may want to chime in here.
That said, I'd be very happy to review patches if you come up with your own ones, so feel free to add me in that case.
Quoted 7 lines
Quoted 6 lines
Cheers,
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00823.html
[3] https://lists.xenproject.org/archives/html/xen-devel/2018-11/msg01093.html
[4] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b3e96c0c756211e805c6941d4a6e5f6e1995cb6b
[5] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00825.html
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
-boris
Quoted 8 lines
Quoted 6 lines
Quoted 5 lines
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-develThank you,
Oleksandr
Thanks,
Munehisa
Quoted 122 lines · Munehisa Kamata
Quoted 2 lines · Oleksandr Andrushchenko
+Amazon
pls see inlineHi Oleksandr,
Let me add some comments as the original author of the series.
Quoted 63 lines · Julien Grall
Quoted 47 lines
Hi,
Quoted 44 lines · Boris Ostrovsky
Quoted 32 lines · Oleksandr Andrushchenko
Quoted 28 lines · Boris Ostrovsky
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
???????? be cleanly done as the backend still holds those (it was not told to
???????? free the resources)
- it is not possible to resume driver operation as all the communication
???????? means with the backned were destroyed by the frontend, thus ???????? making the frontend appear to the guest OS as functional, but ???????? not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().Quoted 7 lines
Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?xl save / xl restore
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
I remember a series from amazon [1] that plays around suspend and hibernation. The patch [2] leads me to think that guest triggered suspend/resume does not work properly. It looks like the series has never been fully reviewed. Not sure why...
Julien, thanks a lot for bringing these patches to our attention which we obviously missed.
Quoted 5 lines
Anyway, from my understanding this series may solve Oleksandr issue. However, this would only address the common code side. AFAIK Oleksandr is targeting Arm platform. If so, I think this would require more work than this series. Arm code still miss few bits properly suspend/resume arch specific code (see [2]).
I have a branch on my git to track the series. However, they never have been resent after Ian Campbell left Citrix. I would be happy to review them if someone wants to pick them up and repost them.
Quoted 13 lines
First of all, let me make it clear that we are interested in hibernation long term, so it would be desirable to re-use as much work form resume/suspend as we can. But, we see it as a step by step work, e.g. first S2RAM and later on hibernation.
Let me clarify the immediate use-case that we have, so it is easier to understand what we want and what we don't at the moment. We are about to continue work started by Mirela/Xilinx on Suspend-to-RAM for ARM [3] and we made number of assumptions:
1. We are talking about *system* suspend, e.g. the goal is to suspend all the components of the system and Xen itself at once. Think about this as fast-boot and/or energy saving feature if you will.
2. With suspend/resume there is no intention to migrate VMs to any other host.
3. Most probably configuration of the back/front won't change between suspend/resume. But long term we are also thinking for supporting suspend/resume in its broader meaning, e.g. what is probably what you mean by suspend/resume.AFAIK .suspend and .resume callbacks in frontend drivers are specifically for xl save/restore case rather than the normal "system" suspend. i.e. The former is Boris' case and something I called "Xen suspend" in the patch series, the latter should be your interest and called "ACPI path" here, and I referred to as "PM suspend". They are very different code paths, see
drivers/xen/manage.cfor details of Xen suspend.Quoted 10 lines
Given that, we think that we don't need Xen support to save grants, page tables and other VM's context on suspend at least at the first stage as we are implementing not a fully blown suspend/resume, but only S2RAM part of it which is much more simpler than a generic suspend implementation. We only need changes to Linux kernel frontend drivers from [1] - the piece that we miss is suspend/resume implementation in the netfront driver. What is more, as we are not changing back/front configuration, we can even live with empty .resume/.suspend frontend's callbacks because event channels, rings etc. are "statically" allocated in our use-case at the first system start (cold boot). And indeed, tests show that waking domains in the right order do allow that.
So, frankly, from [3] we are immediately interested in implementing .resume/.suspend, notIf you just (re)implement .suspend and .resume so without taking care of Xen suspend, you can easily break the existing functionality. The patch series introduced .freeze and .restore callbacks for both PM suspend and hibernation, and kept .suspend (not implemented in most frontend though) and .resume with no changes for Xen suspend.
Note that xenbus has mapped freeze/thaw/restore events to suspend, resume and cancel callbacks to handle "checkpoint" case[4]. This was a bit tricky and led me to the design to have the separate set of callbacks at each frontend driver level[5]. You might need to consider a similar approach even if your immediate interest at the moment is PM suspend.
Quoted 8 lines
even freeze/thaw/restore callbacks: if Amazon has will and capacity to continue working on [3] then once that gets into the upstream it also solves our S2RAM use-case, but if not then we can probably re-work netfront patch and only provide .resume/.suspend callbacks which we need for now (remember our very specific use-case which can survive suspend without callbacks implemented).
IMO, patches at [2] seem to be useful while implementing generic suspend/resume and can be postponed for S2RAM.
Quoted 8 lines
Quoted 3 lines
Julien/Juergen/Boris/Amazon - could you please express your view on the above? Is it acceptable that for now we only take re-worked netfront patch from [3] with full implementation in mind for later (we reuse code for .resume/.suspend)?
In fact, Anchal has taken over my initial work and she may want to chime in here.
That said, I'd be very happy to review patches if you come up with your own ones, so feel free to add me in that case.
Yes I am working on those patches and plan to re-post them in an effort to upstream the the patches. I agree with Munehisa here on considering the patches that are already out there as I plan to keep the same model to distinguish PM SUSPEND and PM HIBERNATION separate from xen suspend and resume.
Quoted 22 lines
Quoted 8 lines
Quoted 7 lines
Cheers,
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00823.html
[3] https://lists.xenproject.org/archives/html/xen-devel/2018-11/msg01093.html
[4] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b3e96c0c756211e805c6941d4a6e5f6e1995cb6b
[5] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00825.htmlQuoted 10 lines
Quoted 10 lines
Quoted 9 lines
-boris
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 5 lines
Quoted 2 lines
Thank you,
OleksandrThanks,
Munehisa
Thanks,
Anchal
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 6 lines · Munehisa Kamata
Quoted 2 lines · Oleksandr Andrushchenko
+Amazon
pls see inlineHi Oleksandr,
Let me add some comments as the original author of the series.
Thank you for your work!
Quoted 71 lines
Quoted 58 lines · Julien Grall
Quoted 43 lines
Hi,
Quoted 40 lines · Boris Ostrovsky
Quoted 38 lines · Oleksandr Andrushchenko
Quoted 27 lines · Boris Ostrovsky
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not
told to
free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?Quoted 8 lines
Quoted 7 lines
xl save / xl restore
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
I remember a series from amazon [1] that plays around suspend and hibernation. The patch [2] leads me to think that guest triggered suspend/resume does not work properly. It looks like the series has never been fully reviewed. Not sure why...
Julien, thanks a lot for bringing these patches to our attention which we obviously missed.
Quoted 4 lines
Anyway, from my understanding this series may solve Oleksandr issue. However, this would only address the common code side. AFAIK Oleksandr is targeting Arm platform. If so, I think this would require more work than this series. Arm code still miss few bits properly suspend/resume arch specific code (see [2]).
I have a branch on my git to track the series. However, they never have been resent after Ian Campbell left Citrix. I would be happy to review them if someone wants to pick them up and repost them.
Quoted 13 lines
First of all, let me make it clear that we are interested in hibernation long term, so it would be desirable to re-use as much work form resume/suspend as we can. But, we see it as a step by step work, e.g. first S2RAM and later on hibernation.
Let me clarify the immediate use-case that we have, so it is easier to understand what we want and what we don't at the moment. We are about to continue work started by Mirela/Xilinx on Suspend-to-RAM for ARM [3] and we made number of assumptions:
1. We are talking about *system* suspend, e.g. the goal is to suspend all the components of the system and Xen itself at once. Think about this as fast-boot and/or energy saving feature if you will.
2. With suspend/resume there is no intention to migrate VMs to any other host.
3. Most probably configuration of the back/front won't change between suspend/resume. But long term we are also thinking for supporting suspend/resume in its broader meaning, e.g. what is probably what you mean by suspend/resume.
Quoted 7 lines
AFAIK .suspend and .resume callbacks in frontend drivers are specifically for xl save/restore case rather than the normal "system" suspend. i.e. The former is Boris' case and something I called "Xen suspend" in the patch series, the latter should be your interest and called "ACPI path" here, and I referred to as "PM suspend". They are very different code paths, see
drivers/xen/manage.cfor details of Xen suspend.
Yes, I saw that code, thank you
Quoted 17 lines
Quoted 11 lines
Given that, we think that we don't need Xen support to save grants, page tables and other VM's context on suspend at least at the first stage as we are implementing not a fully blown suspend/resume, but only S2RAM part of it which is much more simpler than a generic suspend implementation. We only need changes to Linux kernel frontend drivers from [1] - the piece that we miss is suspend/resume implementation in the netfront driver. What is more, as we are not changing back/front configuration, we can even live with empty .resume/.suspend frontend's callbacks because event channels, rings etc. are "statically" allocated in our use-case at the first system start (cold boot). And indeed, tests show that waking domains in the right order do allow that.
So, frankly, from [3] we are immediately interested in implementing .resume/.suspend, notIf you just (re)implement .suspend and .resume so without taking care of Xen suspend, you can easily break the existing functionality. The patch series introduced .freeze and .restore callbacks for both PM suspend and hibernation, and kept .suspend (not implemented in most frontend though) and .resume with no changes for Xen suspend.
Quoted 6 lines
Note that xenbus has mapped freeze/thaw/restore events to suspend, resume and cancel callbacks to handle "checkpoint" case[4]. This was a bit tricky and led me to the design to have the separate set of callbacks at each frontend driver level[5]. You might need to consider a similar approach even if your immediate interest at the moment is PM suspend.
For the immediate task we have at the moment we think we can re-use your work and implement .suspend/.resume based on it (we are targeting S2RAM as the first stage).
But long term - we do support the idea of fully implemented suspend and *hibernate* functionality as you describe it. So, yes, we are also thinking about that.
Quoted 9 lines
Quoted 9 lines
even freeze/thaw/restore callbacks: if Amazon has will and capacity to continue working on [3] then once that gets into the upstream it also solves our S2RAM use-case, but if not then we can probably re-work netfront patch and only provide .resume/.suspend callbacks which we need for now (remember our very specific use-case which can survive suspend without callbacks implemented).
IMO, patches at [2] seem to be useful while implementing generic suspend/resume and can be postponed for S2RAM.
Quoted 5 lines
Quoted 3 lines
Julien/Juergen/Boris/Amazon - could you please express your view on the above? Is it acceptable that for now we only take re-worked netfront patch from [3] with full implementation in mind for later (we reuse code for .resume/.suspend)?
In fact, Anchal has taken over my initial work and she may want to chime in here.
Great, could you please let us know what is the progress and further plans on that, so we do not work on the same code and can coordinate our efforts somehow? Anchal, could you please shed some light on this?
Quoted 3 lines
That said, I'd be very happy to review patches if you come up with your own ones, so feel free to add me in that case.
Sure, thank you!
Quoted 19 lines
Quoted 8 lines
Quoted 7 lines
Cheers,
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00823.html
[3] https://lists.xenproject.org/archives/html/xen-devel/2018-11/msg01093.html
[4] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b3e96c0c756211e805c6941d4a6e5f6e1995cb6b
[5] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00825.htmlQuoted 8 lines
Quoted 8 lines
Quoted 8 lines
-boris
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 4 lines
Quoted 2 lines
Thank you,
OleksandrThanks,
Munehisa
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 6 lines · Munehisa Kamata
Quoted 2 lines · Oleksandr Andrushchenko
+Amazon
pls see inlineHi Oleksandr,
Let me add some comments as the original author of the series.
Thank you for your work!
Quoted 71 lines
Quoted 58 lines · Julien Grall
Quoted 43 lines
Hi,
Quoted 40 lines · Boris Ostrovsky
Quoted 38 lines · Oleksandr Andrushchenko
Quoted 27 lines · Boris Ostrovsky
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
be cleanly done as the backend still holds those (it was not
told to
free the resources)
- it is not possible to resume driver operation as all the communication
means with the backned were destroyed by the frontend, thus making the frontend appear to the guest OS as functional, but not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?Quoted 8 lines
Quoted 7 lines
xl save / xl restore
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
I remember a series from amazon [1] that plays around suspend and hibernation. The patch [2] leads me to think that guest triggered suspend/resume does not work properly. It looks like the series has never been fully reviewed. Not sure why...
Julien, thanks a lot for bringing these patches to our attention which we obviously missed.
Quoted 4 lines
Anyway, from my understanding this series may solve Oleksandr issue. However, this would only address the common code side. AFAIK Oleksandr is targeting Arm platform. If so, I think this would require more work than this series. Arm code still miss few bits properly suspend/resume arch specific code (see [2]).
I have a branch on my git to track the series. However, they never have been resent after Ian Campbell left Citrix. I would be happy to review them if someone wants to pick them up and repost them.
Quoted 13 lines
First of all, let me make it clear that we are interested in hibernation long term, so it would be desirable to re-use as much work form resume/suspend as we can. But, we see it as a step by step work, e.g. first S2RAM and later on hibernation.
Let me clarify the immediate use-case that we have, so it is easier to understand what we want and what we don't at the moment. We are about to continue work started by Mirela/Xilinx on Suspend-to-RAM for ARM [3] and we made number of assumptions:
1. We are talking about *system* suspend, e.g. the goal is to suspend all the components of the system and Xen itself at once. Think about this as fast-boot and/or energy saving feature if you will.
2. With suspend/resume there is no intention to migrate VMs to any other host.
3. Most probably configuration of the back/front won't change between suspend/resume. But long term we are also thinking for supporting suspend/resume in its broader meaning, e.g. what is probably what you mean by suspend/resume.
Quoted 7 lines
AFAIK .suspend and .resume callbacks in frontend drivers are specifically for xl save/restore case rather than the normal "system" suspend. i.e. The former is Boris' case and something I called "Xen suspend" in the patch series, the latter should be your interest and called "ACPI path" here, and I referred to as "PM suspend". They are very different code paths, see
drivers/xen/manage.cfor details of Xen suspend.
Yes, I saw that code, thank you
Quoted 17 lines
Quoted 11 lines
Given that, we think that we don't need Xen support to save grants, page tables and other VM's context on suspend at least at the first stage as we are implementing not a fully blown suspend/resume, but only S2RAM part of it which is much more simpler than a generic suspend implementation. We only need changes to Linux kernel frontend drivers from [1] - the piece that we miss is suspend/resume implementation in the netfront driver. What is more, as we are not changing back/front configuration, we can even live with empty .resume/.suspend frontend's callbacks because event channels, rings etc. are "statically" allocated in our use-case at the first system start (cold boot). And indeed, tests show that waking domains in the right order do allow that.
So, frankly, from [3] we are immediately interested in implementing .resume/.suspend, notIf you just (re)implement .suspend and .resume so without taking care of Xen suspend, you can easily break the existing functionality. The patch series introduced .freeze and .restore callbacks for both PM suspend and hibernation, and kept .suspend (not implemented in most frontend though) and .resume with no changes for Xen suspend.
Quoted 6 lines
Note that xenbus has mapped freeze/thaw/restore events to suspend, resume and cancel callbacks to handle "checkpoint" case[4]. This was a bit tricky and led me to the design to have the separate set of callbacks at each frontend driver level[5]. You might need to consider a similar approach even if your immediate interest at the moment is PM suspend.
For the immediate task we have at the moment we think we can re-use your work and implement .suspend/.resume based on it (we are targeting S2RAM as the first stage).
But long term - we do support the idea of fully implemented suspend and *hibernate* functionality as you describe it. So, yes, we are also thinking about that.
Quoted 9 lines
Quoted 9 lines
even freeze/thaw/restore callbacks: if Amazon has will and capacity to continue working on [3] then once that gets into the upstream it also solves our S2RAM use-case, but if not then we can probably re-work netfront patch and only provide .resume/.suspend callbacks which we need for now (remember our very specific use-case which can survive suspend without callbacks implemented).
IMO, patches at [2] seem to be useful while implementing generic suspend/resume and can be postponed for S2RAM.
Quoted 5 lines
Quoted 3 lines
Julien/Juergen/Boris/Amazon - could you please express your view on the above? Is it acceptable that for now we only take re-worked netfront patch from [3] with full implementation in mind for later (we reuse code for .resume/.suspend)?
In fact, Anchal has taken over my initial work and she may want to chime in here.
Great, could you please let us know what is the progress and further plans on that, so we do not work on the same code and can coordinate our efforts somehow? Anchal, could you please shed some light on this?
Quoted 3 lines
That said, I'd be very happy to review patches if you come up with your own ones, so feel free to add me in that case.
Sure, thank you!
Quoted 23 lines
Quoted 8 lines
Quoted 7 lines
Cheers,
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00823.html
[3] https://lists.xenproject.org/archives/html/xen-devel/2018-11/msg01093.html
[4] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b3e96c0c756211e805c6941d4a6e5f6e1995cb6b
[5] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00825.htmlQuoted 10 lines
Quoted 8 lines
Quoted 8 lines
-boris
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-develThank you,
OleksandrThanks,
Munehisa
Quoted 9 lines · Oleksandr Andrushchenko
Quoted 6 lines · Munehisa Kamata
Quoted 2 lines · Oleksandr Andrushchenko
+Amazon
pls see inlineHi Oleksandr,
Let me add some comments as the original author of the series.
Thank you for your work!
Hi Oleksandr,
Quoted 117 lines
Quoted 71 lines
Quoted 58 lines · Julien Grall
Quoted 43 lines
Hi,
Quoted 40 lines · Boris Ostrovsky
Quoted 38 lines · Oleksandr Andrushchenko
Quoted 27 lines · Boris Ostrovsky
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
???????? be cleanly done as the backend still holds those (it was not
told to
???????? free the resources)
- it is not possible to resume driver operation as all the communication
???????? means with the backned were destroyed by the frontend, thus ???????? making the frontend appear to the guest OS as functional, but ???????? not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?Quoted 8 lines
Quoted 7 lines
xl save / xl restore
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
I remember a series from amazon [1] that plays around suspend and hibernation. The patch [2] leads me to think that guest triggered suspend/resume does not work properly. It looks like the series has never been fully reviewed. Not sure why...
Julien, thanks a lot for bringing these patches to our attention which we obviously missed.
Quoted 4 lines
Anyway, from my understanding this series may solve Oleksandr issue. However, this would only address the common code side. AFAIK Oleksandr is targeting Arm platform. If so, I think this would require more work than this series. Arm code still miss few bits properly suspend/resume arch specific code (see [2]).
I have a branch on my git to track the series. However, they never have been resent after Ian Campbell left Citrix. I would be happy to review them if someone wants to pick them up and repost them.
Quoted 13 lines
First of all, let me make it clear that we are interested in hibernation long term, so it would be desirable to re-use as much work form resume/suspend as we can. But, we see it as a step by step work, e.g. first S2RAM and later on hibernation.
Let me clarify the immediate use-case that we have, so it is easier to understand what we want and what we don't at the moment. We are about to continue work started by Mirela/Xilinx on Suspend-to-RAM for ARM [3] and we made number of assumptions:
1. We are talking about *system* suspend, e.g. the goal is to suspend all the components of the system and Xen itself at once. Think about this as fast-boot and/or energy saving feature if you will.
2. With suspend/resume there is no intention to migrate VMs to any other host.
3. Most probably configuration of the back/front won't change between suspend/resume. But long term we are also thinking for supporting suspend/resume in its broader meaning, e.g. what is probably what you mean by suspend/resume.Quoted 7 lines
AFAIK .suspend and .resume callbacks in frontend drivers are specifically for xl save/restore case rather than the normal "system" suspend. i.e. The former is Boris' case and something I called "Xen suspend" in the patch series, the latter should be your interest and called "ACPI path" here, and I referred to as "PM suspend". They are very different code paths, see
drivers/xen/manage.cfor details of Xen suspend.Yes, I saw that code, thank you
Quoted 17 lines
Quoted 11 lines
Given that, we think that we don't need Xen support to save grants, page tables and other VM's context on suspend at least at the first stage as we are implementing not a fully blown suspend/resume, but only S2RAM part of it which is much more simpler than a generic suspend implementation. We only need changes to Linux kernel frontend drivers from [1] - the piece that we miss is suspend/resume implementation in the netfront driver. What is more, as we are not changing back/front configuration, we can even live with empty .resume/.suspend frontend's callbacks because event channels, rings etc. are "statically" allocated in our use-case at the first system start (cold boot). And indeed, tests show that waking domains in the right order do allow that.
So, frankly, from [3] we are immediately interested in implementing .resume/.suspend, notIf you just (re)implement .suspend and .resume so without taking care of Xen suspend, you can easily break the existing functionality. The patch series introduced .freeze and .restore callbacks for both PM suspend and hibernation, and kept .suspend (not implemented in most frontend though) and .resume with no changes for Xen suspend.
Quoted 6 lines
Note that xenbus has mapped freeze/thaw/restore events to suspend, resume and cancel callbacks to handle "checkpoint" case[4]. This was a bit tricky and led me to the design to have the separate set of callbacks at each frontend driver level[5]. You might need to consider a similar approach even if your immediate interest at the moment is PM suspend.
For the immediate task we have at the moment we think we can re-use your work and implement .suspend/.resume based on it (we are targeting S2RAM as the first stage).
But long term - we do support the idea of fully implemented suspend and *hibernate* functionality as you describe it. So, yes, we are also thinking about that.Quoted 9 lines
Quoted 9 lines
even freeze/thaw/restore callbacks: if Amazon has will and capacity to continue working on [3] then once that gets into the upstream it also solves our S2RAM use-case, but if not then we can probably re-work netfront patch and only provide .resume/.suspend callbacks which we need for now (remember our very specific use-case which can survive suspend without callbacks implemented).
IMO, patches at [2] seem to be useful while implementing generic suspend/resume and can be postponed for S2RAM.
Quoted 9 lines
Quoted 5 lines
Quoted 3 lines
Julien/Juergen/Boris/Amazon - could you please express your view on the above? Is it acceptable that for now we only take re-worked netfront patch from [3] with full implementation in mind for later (we reuse code for .resume/.suspend)?
In fact, Anchal has taken over my initial work and she may want to chime in here.
Great, could you please let us know what is the progress and further plans on that, so we do not work on the same code and can coordinate our efforts somehow? Anchal, could you please shed some light on this?
Quoted 1 line
Looks like my previous email did not make it to mailing list. May be some issues with my email server settings. Giving it another shot.
Yes, I am working on those patches and plan to re-post them in an effort to upstream. I agree with Munehisa here on considering the patches that are already out there as I plan to keep the same model to distinguish PM SUSPEND and PM HIBERNATION from xen suspend and resume. There may be minor fixes here and there however, the overall idea will still remain the same. As the previous patches there will be support for only xen-blkfront and xen-netfront in the initial patchset.
Quoted 26 lines
Quoted 2 lines
That said, I'd be very happy to review patches if you come up with your own ones, so feel free to add me in that case.
Sure, thank you!
Quoted 23 lines
Quoted 8 lines
Quoted 7 lines
Cheers,
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00823.html
[3] https://lists.xenproject.org/archives/html/xen-devel/2018-11/msg01093.html
[4] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b3e96c0c756211e805c6941d4a6e5f6e1995cb6b
[5] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00825.htmlQuoted 10 lines
Quoted 8 lines
Quoted 8 lines
-boris
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-develThank you,
OleksandrThanks,
Munehisa
Thanks,
Anchal
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 125 lines · Anchal Agarwal
Quoted 8 lines · Oleksandr Andrushchenko
Quoted 6 lines · Munehisa Kamata
Quoted 2 lines · Oleksandr Andrushchenko
+Amazon
pls see inlineHi Oleksandr,
Let me add some comments as the original author of the series.
Thank you for your work!
Hi Oleksandr,
Quoted 115 lines
Quoted 68 lines
Quoted 55 lines · Julien Grall
Quoted 42 lines
Hi,
Quoted 39 lines · Boris Ostrovsky
Quoted 38 lines · Oleksandr Andrushchenko
Quoted 27 lines · Boris Ostrovsky
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
???????? be cleanly done as the backend still holds those (it was not
told to
???????? free the resources)
- it is not possible to resume driver operation as all the communication
???????? means with the backned were destroyed by the frontend, thus ???????? making the frontend appear to the guest OS as functional, but ???????? not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?Quoted 7 lines
Quoted 6 lines
xl save / xl restore
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
I remember a series from amazon [1] that plays around suspend and hibernation. The patch [2] leads me to think that guest triggered suspend/resume does not work properly. It looks like the series has never been fully reviewed. Not sure why...
Julien, thanks a lot for bringing these patches to our attention which we obviously missed.
Quoted 4 lines
Anyway, from my understanding this series may solve Oleksandr issue. However, this would only address the common code side. AFAIK Oleksandr is targeting Arm platform. If so, I think this would require more work than this series. Arm code still miss few bits properly suspend/resume arch specific code (see [2]).
I have a branch on my git to track the series. However, they never have been resent after Ian Campbell left Citrix. I would be happy to review them if someone wants to pick them up and repost them.
Quoted 13 lines
First of all, let me make it clear that we are interested in hibernation long term, so it would be desirable to re-use as much work form resume/suspend as we can. But, we see it as a step by step work, e.g. first S2RAM and later on hibernation.
Let me clarify the immediate use-case that we have, so it is easier to understand what we want and what we don't at the moment. We are about to continue work started by Mirela/Xilinx on Suspend-to-RAM for ARM [3] and we made number of assumptions:
1. We are talking about *system* suspend, e.g. the goal is to suspend all the components of the system and Xen itself at once. Think about this as fast-boot and/or energy saving feature if you will.
2. With suspend/resume there is no intention to migrate VMs to any other host.
3. Most probably configuration of the back/front won't change between suspend/resume. But long term we are also thinking for supporting suspend/resume in its broader meaning, e.g. what is probably what you mean by suspend/resume.Quoted 7 lines
AFAIK .suspend and .resume callbacks in frontend drivers are specifically for xl save/restore case rather than the normal "system" suspend. i.e. The former is Boris' case and something I called "Xen suspend" in the patch series, the latter should be your interest and called "ACPI path" here, and I referred to as "PM suspend". They are very different code paths, see
drivers/xen/manage.cfor details of Xen suspend.Yes, I saw that code, thank you
Quoted 16 lines
Quoted 10 lines
Given that, we think that we don't need Xen support to save grants, page tables and other VM's context on suspend at least at the first stage as we are implementing not a fully blown suspend/resume, but only S2RAM part of it which is much more simpler than a generic suspend implementation. We only need changes to Linux kernel frontend drivers from [1] - the piece that we miss is suspend/resume implementation in the netfront driver. What is more, as we are not changing back/front configuration, we can even live with empty .resume/.suspend frontend's callbacks because event channels, rings etc. are "statically" allocated in our use-case at the first system start (cold boot). And indeed, tests show that waking domains in the right order do allow that.
So, frankly, from [3] we are immediately interested in implementing .resume/.suspend, notIf you just (re)implement .suspend and .resume so without taking care of Xen suspend, you can easily break the existing functionality. The patch series introduced .freeze and .restore callbacks for both PM suspend and hibernation, and kept .suspend (not implemented in most frontend though) and .resume with no changes for Xen suspend.
Quoted 6 lines
Note that xenbus has mapped freeze/thaw/restore events to suspend, resume and cancel callbacks to handle "checkpoint" case[4]. This was a bit tricky and led me to the design to have the separate set of callbacks at each frontend driver level[5]. You might need to consider a similar approach even if your immediate interest at the moment is PM suspend.
For the immediate task we have at the moment we think we can re-use your work and implement .suspend/.resume based on it (we are targeting S2RAM as the first stage).
But long term - we do support the idea of fully implemented suspend and *hibernate* functionality as you describe it. So, yes, we are also thinking about that.Quoted 11 lines
Quoted 11 lines
even freeze/thaw/restore callbacks: if Amazon has will and capacity to continue working on [3] then once that gets into the upstream it also solves our S2RAM use-case, but if not then we can probably re-work netfront patch and only provide .resume/.suspend callbacks which we need for now (remember our very specific use-case which can survive suspend without callbacks implemented).
IMO, patches at [2] seem to be useful while implementing generic suspend/resume and can be postponed for S2RAM.Julien/Juergen/Boris/Amazon - could you please express your view on the above? Is it acceptable that for now we only take re-worked netfront patch from [3] with full implementation in mind for later (we reuse code for .resume/.suspend)?
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
In fact, Anchal has taken over my initial work and she may want to chime in here.
Great, could you please let us know what is the progress and further plans on that, so we do not work on the same code and can coordinate our efforts somehow? Anchal, could you please shed some light on this?
Looks like my previous email did not make it to mailing list. May be some issues with my email server settings. Giving it another shot.
Yes, I am working on those patches and plan to re-post them in an effort to upstream.
This is really great, looking forward to it: any date in your mind when this can happen?
Quoted 4 lines
I agree with Munehisa here on considering the patches that are already out there as I plan to keep the same model to distinguish PM SUSPEND and PM HIBERNATION from xen suspend and resume. There may be minor fixes here and there however, the overall idea will still remain the same.
Ok, so I'll plan my efforts accordingly
Quoted 22 lines
As the previous patches there will be support for
only xen-blkfront and xen-netfront in the initial patchset.Quoted 20 lines
Quoted 2 lines
That said, I'd be very happy to review patches if you come up with your own ones, so feel free to add me in that case.
Sure, thank you!
Quoted 17 lines
Quoted 7 lines
Quoted 6 lines
Cheers,
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00823.html
[3] https://lists.xenproject.org/archives/html/xen-devel/2018-11/msg01093.html
[4] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b3e96c0c756211e805c6941d4a6e5f6e1995cb6b
[5] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00825.htmlQuoted 7 lines
Quoted 7 lines
Quoted 7 lines
-boris
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 6 lines
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
Thank you,
OleksandrThanks,
MunehisaThanks,
Anchal
Thank you,
Oleksandr
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 125 lines · Anchal Agarwal
Quoted 8 lines · Oleksandr Andrushchenko
Quoted 6 lines · Munehisa Kamata
Quoted 2 lines · Oleksandr Andrushchenko
+Amazon
pls see inlineHi Oleksandr,
Let me add some comments as the original author of the series.
Thank you for your work!
Hi Oleksandr,
Quoted 115 lines
Quoted 68 lines
Quoted 55 lines · Julien Grall
Quoted 42 lines
Hi,
Quoted 39 lines · Boris Ostrovsky
Quoted 38 lines · Oleksandr Andrushchenko
Quoted 27 lines · Boris Ostrovsky
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
???????? be cleanly done as the backend still holds those (it was not
told to
???????? free the resources)
- it is not possible to resume driver operation as all the communication
???????? means with the backned were destroyed by the frontend, thus ???????? making the frontend appear to the guest OS as functional, but ???????? not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?Quoted 7 lines
Quoted 6 lines
xl save / xl restore
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
I remember a series from amazon [1] that plays around suspend and hibernation. The patch [2] leads me to think that guest triggered suspend/resume does not work properly. It looks like the series has never been fully reviewed. Not sure why...
Julien, thanks a lot for bringing these patches to our attention which we obviously missed.
Quoted 4 lines
Anyway, from my understanding this series may solve Oleksandr issue. However, this would only address the common code side. AFAIK Oleksandr is targeting Arm platform. If so, I think this would require more work than this series. Arm code still miss few bits properly suspend/resume arch specific code (see [2]).
I have a branch on my git to track the series. However, they never have been resent after Ian Campbell left Citrix. I would be happy to review them if someone wants to pick them up and repost them.
Quoted 13 lines
First of all, let me make it clear that we are interested in hibernation long term, so it would be desirable to re-use as much work form resume/suspend as we can. But, we see it as a step by step work, e.g. first S2RAM and later on hibernation.
Let me clarify the immediate use-case that we have, so it is easier to understand what we want and what we don't at the moment. We are about to continue work started by Mirela/Xilinx on Suspend-to-RAM for ARM [3] and we made number of assumptions:
1. We are talking about *system* suspend, e.g. the goal is to suspend all the components of the system and Xen itself at once. Think about this as fast-boot and/or energy saving feature if you will.
2. With suspend/resume there is no intention to migrate VMs to any other host.
3. Most probably configuration of the back/front won't change between suspend/resume. But long term we are also thinking for supporting suspend/resume in its broader meaning, e.g. what is probably what you mean by suspend/resume.Quoted 7 lines
AFAIK .suspend and .resume callbacks in frontend drivers are specifically for xl save/restore case rather than the normal "system" suspend. i.e. The former is Boris' case and something I called "Xen suspend" in the patch series, the latter should be your interest and called "ACPI path" here, and I referred to as "PM suspend". They are very different code paths, see
drivers/xen/manage.cfor details of Xen suspend.Yes, I saw that code, thank you
Quoted 16 lines
Quoted 10 lines
Given that, we think that we don't need Xen support to save grants, page tables and other VM's context on suspend at least at the first stage as we are implementing not a fully blown suspend/resume, but only S2RAM part of it which is much more simpler than a generic suspend implementation. We only need changes to Linux kernel frontend drivers from [1] - the piece that we miss is suspend/resume implementation in the netfront driver. What is more, as we are not changing back/front configuration, we can even live with empty .resume/.suspend frontend's callbacks because event channels, rings etc. are "statically" allocated in our use-case at the first system start (cold boot). And indeed, tests show that waking domains in the right order do allow that.
So, frankly, from [3] we are immediately interested in implementing .resume/.suspend, notIf you just (re)implement .suspend and .resume so without taking care of Xen suspend, you can easily break the existing functionality. The patch series introduced .freeze and .restore callbacks for both PM suspend and hibernation, and kept .suspend (not implemented in most frontend though) and .resume with no changes for Xen suspend.
Quoted 6 lines
Note that xenbus has mapped freeze/thaw/restore events to suspend, resume and cancel callbacks to handle "checkpoint" case[4]. This was a bit tricky and led me to the design to have the separate set of callbacks at each frontend driver level[5]. You might need to consider a similar approach even if your immediate interest at the moment is PM suspend.
For the immediate task we have at the moment we think we can re-use your work and implement .suspend/.resume based on it (we are targeting S2RAM as the first stage).
But long term - we do support the idea of fully implemented suspend and *hibernate* functionality as you describe it. So, yes, we are also thinking about that.Quoted 11 lines
Quoted 11 lines
even freeze/thaw/restore callbacks: if Amazon has will and capacity to continue working on [3] then once that gets into the upstream it also solves our S2RAM use-case, but if not then we can probably re-work netfront patch and only provide .resume/.suspend callbacks which we need for now (remember our very specific use-case which can survive suspend without callbacks implemented).
IMO, patches at [2] seem to be useful while implementing generic suspend/resume and can be postponed for S2RAM.Julien/Juergen/Boris/Amazon - could you please express your view on the above? Is it acceptable that for now we only take re-worked netfront patch from [3] with full implementation in mind for later (we reuse code for .resume/.suspend)?
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
In fact, Anchal has taken over my initial work and she may want to chime in here.
Great, could you please let us know what is the progress and further plans on that, so we do not work on the same code and can coordinate our efforts somehow? Anchal, could you please shed some light on this?
Looks like my previous email did not make it to mailing list. May be some issues with my email server settings. Giving it another shot.
Yes, I am working on those patches and plan to re-post them in an effort to upstream.
This is really great, looking forward to it: any date in your mind when this can happen?
Quoted 4 lines
I agree with Munehisa here on considering the patches that are already out there as I plan to keep the same model to distinguish PM SUSPEND and PM HIBERNATION from xen suspend and resume. There may be minor fixes here and there however, the overall idea will still remain the same.
Ok, so I'll plan my efforts accordingly
Quoted 22 lines
As the previous patches there will be support for
only xen-blkfront and xen-netfront in the initial patchset.Quoted 20 lines
Quoted 2 lines
That said, I'd be very happy to review patches if you come up with your own ones, so feel free to add me in that case.
Sure, thank you!
Quoted 17 lines
Quoted 7 lines
Quoted 6 lines
Cheers,
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00823.html
[3] https://lists.xenproject.org/archives/html/xen-devel/2018-11/msg01093.html
[4] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b3e96c0c756211e805c6941d4a6e5f6e1995cb6b
[5] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00825.htmlQuoted 7 lines
Quoted 7 lines
Quoted 7 lines
-boris
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 6 lines
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
Thank you,
OleksandrThanks,
MunehisaThanks,
Anchal
Thank you,
Oleksandr
Quoted 128 lines · Oleksandr Andrushchenko
Quoted 127 lines · Anchal Agarwal
Quoted 8 lines · Oleksandr Andrushchenko
Quoted 6 lines · Munehisa Kamata
Quoted 2 lines · Oleksandr Andrushchenko
+Amazon
pls see inlineHi Oleksandr,
Let me add some comments as the original author of the series.
Thank you for your work!
Hi Oleksandr,
Quoted 117 lines
Quoted 68 lines
Quoted 55 lines · Julien Grall
Quoted 42 lines
Hi,
Quoted 39 lines · Boris Ostrovsky
Quoted 38 lines · Oleksandr Andrushchenko
Quoted 27 lines · Boris Ostrovsky
Quoted 18 lines · Oleksandr Andrushchenko
Quoted 17 lines · Boris Ostrovsky
Quoted 16 lines · Oleksandr Andrushchenko
From: Oleksandr Andrushchenko <[email protected]>
Currently on driver resume we remove all the network queues and destroy shared Tx/Rx rings leaving the driver in its current state and never signaling the backend of this frontend's state change. This leads to the number of consequences:
- when frontend withdraws granted references to the rings etc. it cannot
???????? be cleanly done as the backend still holds those (it was not
told to
???????? free the resources)
- it is not possible to resume driver operation as all the communication
???????? means with the backned were destroyed by the frontend, thus ???????? making the frontend appear to the guest OS as functional, but ???????? not really.Quoted 8 lines
Quoted 2 lines
What do you mean? Are you saying that after resume you lose connectivity?
Exactly, if you take a look at the .resume callback as it is now what it does it destroys the rings etc. and never notifies the backend of that, e.g. it stays in, say, connected state with communication channels destroyed. It never goes into any other Xen bus state, so there is
no way its state machine can help recovering.Quoted 3 lines
My tree is about a month old so perhaps there is some sort of regression but this certainly works for me. After resume netfront gets XenbusStateInitWait from backend which causes
xennet_connect().Ah, the difference can be of the way we get the guest enter the suspend state. I am making my guest to suspend with:
echo mem >/sys/power/state
And then I use an interrupt to the guest (this is a test code) to wake it up.
Could you please share your exact use-case when the guest enters suspend and what you do to resume it?Quoted 7 lines
Quoted 6 lines
xl save / xl restore
Quoted 3 lines
I can see no way backend may want enter XenbusStateInitWait in my use-case
as it simply doesn't know we want him to.Yours looks like ACPI path, I don't know how well it was tested TBH.
I remember a series from amazon [1] that plays around suspend and hibernation. The patch [2] leads me to think that guest triggered suspend/resume does not work properly. It looks like the series has never been fully reviewed. Not sure why...
Julien, thanks a lot for bringing these patches to our attention which we obviously missed.
Quoted 4 lines
Anyway, from my understanding this series may solve Oleksandr issue. However, this would only address the common code side. AFAIK Oleksandr is targeting Arm platform. If so, I think this would require more work than this series. Arm code still miss few bits properly suspend/resume arch specific code (see [2]).
I have a branch on my git to track the series. However, they never have been resent after Ian Campbell left Citrix. I would be happy to review them if someone wants to pick them up and repost them.
Quoted 13 lines
First of all, let me make it clear that we are interested in hibernation long term, so it would be desirable to re-use as much work form resume/suspend as we can. But, we see it as a step by step work, e.g. first S2RAM and later on hibernation.
Let me clarify the immediate use-case that we have, so it is easier to understand what we want and what we don't at the moment. We are about to continue work started by Mirela/Xilinx on Suspend-to-RAM for ARM [3] and we made number of assumptions:
1. We are talking about *system* suspend, e.g. the goal is to suspend all the components of the system and Xen itself at once. Think about this as fast-boot and/or energy saving feature if you will.
2. With suspend/resume there is no intention to migrate VMs to any other host.
3. Most probably configuration of the back/front won't change between suspend/resume. But long term we are also thinking for supporting suspend/resume in its broader meaning, e.g. what is probably what you mean by suspend/resume.Quoted 7 lines
AFAIK .suspend and .resume callbacks in frontend drivers are specifically for xl save/restore case rather than the normal "system" suspend. i.e. The former is Boris' case and something I called "Xen suspend" in the patch series, the latter should be your interest and called "ACPI path" here, and I referred to as "PM suspend". They are very different code paths, see
drivers/xen/manage.cfor details of Xen suspend.Yes, I saw that code, thank you
Quoted 16 lines
Quoted 10 lines
Given that, we think that we don't need Xen support to save grants, page tables and other VM's context on suspend at least at the first stage as we are implementing not a fully blown suspend/resume, but only S2RAM part of it which is much more simpler than a generic suspend implementation. We only need changes to Linux kernel frontend drivers from [1] - the piece that we miss is suspend/resume implementation in the netfront driver. What is more, as we are not changing back/front configuration, we can even live with empty .resume/.suspend frontend's callbacks because event channels, rings etc. are "statically" allocated in our use-case at the first system start (cold boot). And indeed, tests show that waking domains in the right order do allow that.
So, frankly, from [3] we are immediately interested in implementing .resume/.suspend, notIf you just (re)implement .suspend and .resume so without taking care of Xen suspend, you can easily break the existing functionality. The patch series introduced .freeze and .restore callbacks for both PM suspend and hibernation, and kept .suspend (not implemented in most frontend though) and .resume with no changes for Xen suspend.
Quoted 6 lines
Note that xenbus has mapped freeze/thaw/restore events to suspend, resume and cancel callbacks to handle "checkpoint" case[4]. This was a bit tricky and led me to the design to have the separate set of callbacks at each frontend driver level[5]. You might need to consider a similar approach even if your immediate interest at the moment is PM suspend.
For the immediate task we have at the moment we think we can re-use your work and implement .suspend/.resume based on it (we are targeting S2RAM as the first stage).
But long term - we do support the idea of fully implemented suspend and *hibernate* functionality as you describe it. So, yes, we are also thinking about that.Quoted 13 lines
Quoted 11 lines
even freeze/thaw/restore callbacks: if Amazon has will and capacity to continue working on [3] then once that gets into the upstream it also solves our S2RAM use-case, but if not then we can probably re-work netfront patch and only provide .resume/.suspend callbacks which we need for now (remember our very specific use-case which can survive suspend without callbacks implemented).
IMO, patches at [2] seem to be useful while implementing generic suspend/resume and can be postponed for S2RAM.Julien/Juergen/Boris/Amazon - could you please express your view on the above? Is it acceptable that for now we only take re-worked netfront patch from [3] with full implementation in mind for later (we reuse code for .resume/.suspend)?
In fact, Anchal has taken over my initial work and she may want to chime in here.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Great, could you please let us know what is the progress and further plans on that, so we do not work on the same code and can coordinate our efforts somehow? Anchal, could you please shed some light on this?
Looks like my previous email did not make it to mailing list. May be some issues with my email server settings. Giving it another shot.
Yes, I am working on those patches and plan to re-post them in an effort to upstream.This is really great, looking forward to it: any date in your mind when this can happen?
Not a specific date but may be in few weeks. I am currently swamped at work.
Quoted 27 lines
Quoted 4 lines
I agree with Munehisa here on considering the patches that are already out there as I plan to keep the same model to distinguish PM SUSPEND and PM HIBERNATION from xen suspend and resume. There may be minor fixes here and there however, the overall idea will still remain the same.
Ok, so I'll plan my efforts accordingly
Quoted 22 lines
As the previous patches there will be support for
only xen-blkfront and xen-netfront in the initial patchset.Quoted 20 lines
Quoted 2 lines
That said, I'd be very happy to review patches if you come up with your own ones, so feel free to add me in that case.
Sure, thank you!
Quoted 17 lines
Quoted 7 lines
Quoted 6 lines
Cheers,
[1] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00823.html
[3] https://lists.xenproject.org/archives/html/xen-devel/2018-11/msg01093.html
[4] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b3e96c0c756211e805c6941d4a6e5f6e1995cb6b
[5] https://lists.xenproject.org/archives/html/xen-devel/2018-06/msg00825.htmlQuoted 7 lines
Quoted 7 lines
Quoted 7 lines
-boris
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
Thank you,
OleksandrThanks,
MunehisaThanks,
AnchalThank you,
Oleksandr
Thanks,
Anchal
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Hello, Anchal!
On 3/29/19 1:19 AM, Anchal Agarwal wrote:
[snip]
Quoted 10 lines
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Great, could you please let us know what is the progress and further plans on that, so we do not work on the same code and can coordinate our efforts somehow? Anchal, could you please shed some light on this?
Looks like my previous email did not make it to mailing list. May be some issues with my email server settings. Giving it another shot.
Yes, I am working on those patches and plan to re-post them in an effort to upstream.This is really great, looking forward to it: any date in your mind when this can happen?
Not a specific date but may be in few weeks. I am currently swamped at work.
Any progress on this?
Thank you,
Oleksandr
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Hello, Anchal!
On 3/29/19 1:19 AM, Anchal Agarwal wrote:
[snip]
Quoted 10 lines
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Great, could you please let us know what is the progress and further plans on that, so we do not work on the same code and can coordinate our efforts somehow? Anchal, could you please shed some light on this?
Looks like my previous email did not make it to mailing list. May be some issues with my email server settings. Giving it another shot.
Yes, I am working on those patches and plan to re-post them in an effort to upstream.This is really great, looking forward to it: any date in your mind when this can happen?
Not a specific date but may be in few weeks. I am currently swamped at work.
Any progress on this?
Thank you,
Oleksandr
Hi Oleksandr,
Hello, Anchal!
On 3/29/19 1:19 AM, Anchal Agarwal wrote:
[snip]
>>>> Great, could you please let us know what is the progress and further plans >>>> on that, so we do not work on the same code and can coordinate our
>>>> efforts somehow? Anchal, could you please shed some light on this?
>>> Looks like my previous email did not make it to mailing list. May be some issues with my >>> email server settings. Giving it another shot.
>>> Yes, I am working on those patches and plan to re-post them in an effort to upstream. >> This is really great, looking forward to it: any date in your mind
>> when this can happen?
> Not a specific date but may be in few weeks. I am currently swamped at work. >
Any progress on this?
Yes, but at a snail's pace.
Thank you,
Oleksandr
Thanks,
Anchal
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Hi Oleksandr,
Hello, Anchal!
On 3/29/19 1:19 AM, Anchal Agarwal wrote:
[snip]
>>>> Great, could you please let us know what is the progress and further plans >>>> on that, so we do not work on the same code and can coordinate our
>>>> efforts somehow? Anchal, could you please shed some light on this?
>>> Looks like my previous email did not make it to mailing list. May be some issues with my >>> email server settings. Giving it another shot.
>>> Yes, I am working on those patches and plan to re-post them in an effort to upstream. >> This is really great, looking forward to it: any date in your mind
>> when this can happen?
> Not a specific date but may be in few weeks. I am currently swamped at work. >
Any progress on this?
Yes, but at a snail's pace.
Thank you,
Oleksandr
Thanks,
Anchal