Skip to contentSkip to conversation

sk98lin, jumbo frames, and memory fragmentation

DISCUSSION Chris Friesen 4 participants 7 messages Oct 1, 2007

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi all,

We're considering some hardware that uses the sk98lin network hardware, and we'll be using jumbo frames. Looking at the driver, when using a 9KB MTU it seems like it would end up trying to atomically allocate a 16KB buffer.

Has anyone heard of this been a problem? It would seem like trying to atomically allocate four physically contiguous pages could become tricky after the system has been running for a while.

The reason I ask is that we ran into this with the e1000. Before they added the new jumbo frame code it was trying to atomically allocate 32KB buffers and we would start getting allocation failures after a month or so of uptime.

Any information anyone can provide would be appreciated.

Thanks,

Chris

#1 lore raw

Yes it has this problem. I've observed it in practice on a busy firewall.

-John

Quoted 19 lines · Chris Friesen

Hi all,

We're considering some hardware that uses the sk98lin network hardware, and we'll be using jumbo frames. Looking at the driver, when using a 9KB MTU it seems like it would end up trying to atomically allocate a 16KB buffer.

Has anyone heard of this been a problem? It would seem like trying to atomically allocate four physically contiguous pages could become tricky after the system has been running for a while.

The reason I ask is that we ran into this with the e1000. Before they added the new jumbo frame code it was trying to atomically allocate 32KB buffers and we would start getting allocation failures after a month or so of uptime.

Any information anyone can provide would be appreciated.

Thanks,

Chris
-
To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#2 lore raw
In reply to Chris Friesen
Quoted 1 line · Chris Friesen

We're considering some hardware that uses the sk98lin network hardware, and we'll be using jumbo frames. Looking at the driver, when using a 9KB MTU it seems like it would end up trying to atomically allocate a 16KB buffer.

The sk98lin driver is going away, please don't use it.

It's unmaintained and full of known bugs.

Jeff

#3 lore raw
Quoted 3 lines · Jeff Garzik

The sk98lin driver is going away, please don't use it.

It's unmaintained and full of known bugs.

Okay...so it looks like the proper driver for the Marvell Yukon 88E8062 is the sky2 driver, and this one does avoid order>0 allocations. Am I on track?

Chris

#4 lore raw
In reply to Chris Friesen
Quoted 12 lines · On Mon, 01 Oct 2007 14:35:48 -0600 "Chris Friesen" <[email protected]> wrote:

Hi all,

We're considering some hardware that uses the sk98lin network hardware, and we'll be using jumbo frames. Looking at the driver, when using a 9KB MTU it seems like it would end up trying to atomically allocate a 16KB buffer.

Has anyone heard of this been a problem? It would seem like trying to atomically allocate four physically contiguous pages could become tricky after the system has been running for a while.

Quoted 6 lines

The reason I ask is that we ran into this with the e1000. Before they added the new jumbo frame code it was trying to atomically allocate 32KB buffers and we would start getting allocation failures after a month or so of uptime.

Any information anyone can provide would be appreciated.

Adding fragmentation support to skge driver is on my list of possible extensions. sky2 driver already supports it (yet one more feature that the vendor sk98lin driver doesn't do).

Signature · 1 line
Stephen Hemminger <[email protected]>
#5 lore raw
Quoted 3 lines · Stephen Hemminger

Adding fragmentation support to skge driver is on my list of possible extensions. sky2 driver already supports it (yet one more feature that the vendor sk98lin driver doesn't do).

Thanks for speaking up. As I mentioned in my email to Jeff it looks like the sky2 driver is what I need (Marvel Yukon 88E8062). However, I'm on 2.6.14 and it doesn't exist there...do you anticipate any issues if I were to backport it?

Thanks,

Chris

#6 lore raw
Quoted 10 lines · On Mon, 01 Oct 2007 15:15:59 -0600 "Chris Friesen" <[email protected]> wrote:
Quoted 3 lines · Stephen Hemminger

Adding fragmentation support to skge driver is on my list of possible extensions. sky2 driver already supports it (yet one more feature that the vendor sk98lin driver doesn't do).

Thanks for speaking up. As I mentioned in my email to Jeff it looks like the sky2 driver is what I need (Marvel Yukon 88E8062). However, I'm on 2.6.14 and it doesn't exist there...do you anticipate any issues if I were to backport it?

Nothing but usual annoying kernel API changes..

Signature · 1 line
Stephen Hemminger <[email protected]>