Skip to contentSkip to conversation

ethtool: Add e1000e reg dump support (using e1000 decode function)

PATCH Applied Auke Kok 2 participants 2 messages Oct 4, 2007 – Oct 5, 2007

Subsystems (2)
Networking Network drivers
lore
Share & tools
lore

Auke Kok

author
#0 lore raw

PATCH 1/1 ethtool: Add e1000e reg dump support (using e1000 decode function)

The e1000 register dump code can print out e1000e register dump information as well, so enable it for e1000e devices.

Signed-off-by Auke Kok <[email protected]>

---

 ethtool.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
ethtool.c +1 -0
index 651529e..6c7a2e3 100644
@@ -1003,6 +1003,7 @@ static struct {
 	{ "r8169", realtek_dump_regs },
 	{ "de2104x", de2104x_dump_regs },
 	{ "e1000", e1000_dump_regs },
+	{ "e1000e", e1000_dump_regs },
 	{ "igb", igb_dump_regs },
 	{ "ixgb", ixgb_dump_regs },
 	{ "ixgbe", ixgbe_dump_regs },
Applied
#1 lore raw
Quoted 4 lines · Auke Kok

The e1000 register dump code can print out e1000e register dump information as well, so enable it for e1000e devices.

Signed-off-by Auke Kok <[email protected]>

applied