How to use rate limit with marks set on packets with own
Hi
After several days testing and studing howtos and docu again ...
I want to limit all tcp trafic with the limit module to say one connection per second except some known trafic.
(This is because of using p2p progs gets mi crazy which gets my adsl modem down
and I share my net with some users and because of encryption of stream l7 does not work ...)
As I understand the limit module does work only on queues i.e. INPUT,FORWARD, OUTPUT or user defiend.
My idea now: create a user defined queue and limit this queue to 2 connections per minute (only to test).
Now my question
How can I select that trafic with a mark set do not go to this queue? What I do now is the following:
( I have some queues to priorize traffic with the marks ...)
So I mark some trafic.
...
tc filter add dev $DEV parent 1:0 protocol ip prio 1 handle 1 fw
classid 1:10
iptables -t mangle -A PREROUTING -p icmp -j MARK --set-mark 0x1 iptables -t mangle -A PREROUTING -p tcp -m tcp --dport 80 -j MARK
--set-mark 0x1
iptables -t mangle -A PREROUTING -p tcp -m tcp --dport 80 -j RETURN iptables -t mangle -A PREROUTING -p tcp -m tcp --sport 80 -j MARK
--set-mark 0x1
iptables -t mangle -A PREROUTING -p tcp -m tcp --sport 80 -j RETURN
I create a new queue test which all trafic should go EXPECT the marked ones:
iptables -N test
### WHAT DO I HAVE TO PUT THAT ALL MARKED or say MARK 0x1 go on not to test ...
iptables -A FORWARD -p TCP -j test
iptables -A test -p tcp -m state --state NEW -m recent --set iptables -A test -p tcp -m state --state NEW -m recent --update --seconds 60 --hitcount 2 -j LOG
iptables -A test -p tcp -m state --state NEW -m recent --update --seconds 60 --hitcount 2 -j DROP
Or is there a much better way to do this???
Thanks a lot for any hints!!!
Beat
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc