KGDB: This is the simple KGDB over Ethernet I/O driver that NET_POLL

@@ -231,6 +231,7 @@ obj-$(CONFIG_ETRAX_ETHERNET) += cris/
 obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
 
 obj-$(CONFIG_NETCONSOLE) += netconsole.o
+obj-$(CONFIG_KGDBOE) += kgdboe.o
 
 obj-$(CONFIG_FS_ENET) += fs_enet/
 

@@ -65,8 +65,30 @@ config KGDB_8250_NOMODULE
 	  Uses generic serial port (8250) to communicate with the host
 	  GDB.  This is independent of the normal (SERIAL_8250) driver
 	  for this chipset.
+
+config KGDBOE_NOMODULE
+	bool "KGDB: On ethernet - in kernel"
+	depends on NET
+	select KGDBOE
+	help
+	  Uses the NETPOLL API to communicate with the host GDB via UDP.
+	  In order for this to work, the ethernet interface specified must
+	  support the NETPOLL API, and this must be initialized at boot.
+	  See the documentation for syntax.
 endchoice
 
+config KGDBOE
+	tristate "KGDB: On ethernet" if !KGDBOE_NOMODULE
+	depends on m && KGDB && NET
+	select NETPOLL
+	select NETPOLL_TRAP
+	select NET_POLL_CONTROLLER
+	help
+	  Uses the NETPOLL API to communicate with the host GDB via UDP.
+	  In order for this to work, the ethernet interface specified must
+	  support the NETPOLL API, and this must be initialized at boot.
+	  See the documentation for syntax.
+
 config KGDB_8250
 	tristate "KGDB: On generic serial port (8250)" if !KGDB_8250_NOMODULE
 	depends on m && KGDB_ONLY_MODULES

@@ -780,6 +780,13 @@ and is between 256 and 4096 characters. 
 	ips=		[HW,SCSI] Adaptec / IBM ServeRAID controller
 			See header of drivers/scsi/ips.c.
 
+	kgdboe=		[HW] Setup the local ip information and host ip
+			information when the network driver supports
+			NETPOLL and kgdboe is configured as a built in.
+			Options are:
+			[src-port]@<src-ip>/[dev],[tgt-port]@<tgt-ip>/<tgt-mac>
+			IE: [email protected]/,@10.0.0.1.3/
+
 	ports=		[IP_VS_FTP] IPVS ftp helper module
 			Default is 21.
 			Up to 8 (IP_VS_APP_MAX_PORTS) ports