Skip to contentSkip to conversation

Ethernet on i.MX8MM with mainline U-Boot

U-Boot Schrempf Frieder 2 participants 2 messages Sep 17, 2019 – Sep 18, 2019

lore
Share & tools
lore
#0 lore raw

Hi Peng,

I tried to get Ethernet running on i.MX8MM with mainline U-Boot and your latest patches for SoC-support.
I added the missing clocks, but something still seems to be wrong. It seems like the clock parents are not set correctly.

If I run "dm tree", I see that the enet_axi is a child of clock-osc-24m, but I would expect it to be under sys_pll1_266m as specified in the devicetree.

Do you have an idea what could be wrong or some working code to look at?

Thanks for your help!

Regards,
Frieder

#1 lore raw

Hi Frider,

Quoted 14 lines

-----Original Message-----
From: Schrempf Frieder <[email protected]>
Sent: 2019年9月17日 21:49
To: Peng Fan <[email protected]>
Cc: u-boot at lists.denx.de
Subject: Ethernet on i.MX8MM with mainline U-Boot

Hi Peng,

I tried to get Ethernet running on i.MX8MM with mainline U-Boot and your latest patches for SoC-support.
I added the missing clocks, but something still seems to be wrong. It seems like the clock parents are not set correctly.

Quoted 4 lines

If I run "dm tree", I see that the enet_axi is a child of clock-osc-24m, but I would expect it to be under sys_pll1_266m as specified in the devicetree.

Do you have an idea what could be wrong or some working code to look at?

I think it might be clk_set_defaults not work for U-Boot proper. I have not tried enet. Will give a look.

Regards,
Peng.

Quoted 5 lines

Thanks for your help!

Regards,
Frieder