fix oops on corrupted ext4 mount

When mounting an ext4 filesystem with corrupted s_first_data_block, things can go very wrong and oops.

Because blocks_count in ext4_fill_super is a u64, and we must use do_div, the calculation of db_count is done differently than on ext4. If first_data_block is corrupted such that it is larger than ext4_blocks_count, for example, then the intermediate blocks_count value may go negative, but sign-extend to a very large value:

        blocks_count = (ext4_blocks_count(es) -
                        le32_to_cpu(es->s_first_data_block) +
                        EXT4_BLOCKS_PER_GROUP(sb) - 1);

This is then assigned to s_groups_count which is an unsigned long:

        sbi->s_groups_count = blocks_count;

This may result in a value of 0xFFFFFFFF which is then used to compute db_count:

        db_count = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) - 1) /
                   EXT4_DESC_PER_BLOCK(sb);

and in this case db_count will wind up as 0 because the addition overflows 32 bits. This in turn causes the kmalloc for group_desc to be of 0 size:

        sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *),
                                    GFP_KERNEL);

and eventually in ext4_check_descriptors, dereferencing sbi->s_group_desc[desc_block] will result in a NULL pointer dereference.

The simplest test seems to be to sanity check s_first_data_block, EXT4_BLOCKS_PER_GROUP, and ext4_blocks_count values to be sure their combination won't result in a bad intermediate value for blocks_count. We could just check for db_count == 0, but catching it at the root cause seems like it provides more info.

---

Index: linux-2.6.24-rc1/fs/ext4/super.c
===================================================================
@@ -2047,6 +2047,17 @@ static int ext4_fill_super (struct super
 
 	if (EXT4_BLOCKS_PER_GROUP(sb) == 0)
 		goto cantfind_ext4;
+
+	/* ensure blocks_count calculation below doesn't sign-extend */
+	if (ext4_blocks_count(es) + EXT4_BLOCKS_PER_GROUP(sb) <
+	    le32_to_cpu(es->s_first_data_block) + 1) {
+		printk(KERN_WARNING "EXT4-fs: bad geometry: block count %llu, "
+		       "first data block %u, blocks per group %lu\n",
+			ext4_blocks_count(es),
+			le32_to_cpu(es->s_first_data_block),
+			EXT4_BLOCKS_PER_GROUP(sb));
+		goto failed_mount;
+	}
 	blocks_count = (ext4_blocks_count(es) -
 			le32_to_cpu(es->s_first_data_block) +
 			EXT4_BLOCKS_PER_GROUP(sb) - 1);

Urgh... "than on ext3"

-Eric