libata: port and host should be stopped before hardware resources are released
PATCH 1/1 libata: port and host should be stopped before hardware resources are released
Port / host stop calls used to be made from ata_host_release() which is called after all hardware resources acquired after host allocation are released. This is wrong as port and host stop routines often access the hardware.
Add separate devres for port / host stop which is invoked right after IRQ is released but with all other hardware resources intact. The devres is added iff ->host_stop and/or ->port_stop exist.
This problem has been spotted by Mark Lord.
---
Jeff, this really needs to get into 2.6.24. Although it hasn't caused any real problem (yet), ahci is one of the affected drivers and it's poking released iomems in its port_ops.
drivers/ata/libata-core.c | 52 ++++++++++++++++++++++++++++++++++------------ 1 file changed, 39 insertions(+), 13 deletions(-)
drivers/ata/libata-core.c +39 -13
@@ -6821,19 +6821,6 @@ static void ata_host_release(struct device *gendev, void *res)if (!ap)continue ; -if ((host->flags &ATA_HOST_STARTED ) && ap->ops->port_stop) - ap->ops->port_stop (ap); - } - -if ((host->flags &ATA_HOST_STARTED ) && host->ops->host_stop) - host->ops->host_stop (host); - -for (i =0 ; i < host->n_ports; i++) { -struct ata_port *ap = host->ports[i]; - -if (!ap) -continue ; -if (ap->scsi_host)scsi_host_put (ap->scsi_host);
@@ -6960,6 +6947,24 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev,return host; } +static void ata_host_stop (struct device *gendev,void *res) +{ +struct ata_host *host =dev_get_drvdata (gendev); +int i; + +WARN_ON (!(host->flags &ATA_HOST_STARTED )); + +for (i =0 ; i < host->n_ports; i++) { +struct ata_port *ap = host->ports[i]; + +if (ap->ops->port_stop) + ap->ops->port_stop (ap); + } + +if (host->ops->host_stop) + host->ops->host_stop (host); +} +/** * ata_host_start - start and freeze ports of an ATA host * @host: ATA host to start ports for
@@ -6978,6 +6983,8 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev,*/ int ata_host_start (struct ata_host *host) { +int have_stop =0 ; +void *start_dr =NULL ;int i, rc;if (host->flags &ATA_HOST_STARTED )
@@ -6989,6 +6996,22 @@ int ata_host_start(struct ata_host *host)if (!host->ops && !ata_port_is_dummy (ap)) host->ops = ap->ops; +if (ap->ops->port_stop) + have_stop =1 ; + } + +if (host->ops->host_stop) + have_stop =1 ; + +if (have_stop) { + start_dr =devres_alloc (ata_host_stop,0 ,GFP_KERNEL ); +if (!start_dr) +return -ENOMEM ; + } + +for (i =0 ; i < host->n_ports; i++) { +struct ata_port *ap = host->ports[i]; +if (ap->ops->port_start) { rc = ap->ops->port_start (ap);if (rc) {
@@ -7001,6 +7024,8 @@ int ata_host_start(struct ata_host *host)ata_eh_freeze_port (ap); } +if (start_dr) +devres_add (host->dev, start_dr); host->flags |=ATA_HOST_STARTED ;return 0 ;
@@ -7011,6 +7036,7 @@ int ata_host_start(struct ata_host *host)if (ap->ops->port_stop) ap->ops->port_stop (ap); } +devres_free (start_dr);return rc; }
Jeff Garzik
AppliedQuoted 9 lines · Tejun Heo
Port / host stop calls used to be made from
ata_host_release()which is called after all hardware resources acquired after host allocation are released. This is wrong as port and host stop routines often access the hardware.Add separate devres for port / host stop which is invoked right after IRQ is released but with all other hardware resources intact. The devres is added iff ->host_stop and/or ->port_stop exist.
Quoted 8 lines
This problem has been spotted by Mark Lord.
Signed-off-by Tejun Heo <[email protected]>Cc Mark Lord <[email protected]>---
Jeff, this really needs to get into 2.6.24. Although it hasn't caused any real problem (yet), ahci is one of the affected drivers and it's poking released iomems in itsport_ops.
applied