Make it possible to use a builtin OF tree.
PATCH 1/1 Make it possible to use a builtin OF tree.
--- common/cmd_bootm.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-)
common/cmd_bootm.c +4 -1
@@ -507,6 +507,9 @@ fixup_silent_linux ()#endif /* CONFIG_SILENT_CONSOLE */ #ifdef CONFIG_PPC +#ifndef DEFAULT_OF_TREE +#define DEFAULT_OF_TREE NULL +#endif static void __attribute__((noinline)) do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
@@ -527,7 +530,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag,void (*kernel)(bd_t *,ulong ,ulong ,ulong ,ulong );image_header_t *hdr = &header;#if defined(CONFIG_OF_FLAT_TREE ) || defined(CONFIG_OF_LIBFDT ) -char *of_flat_tree =NULL ; +char *of_flat_tree =DEFAULT_OF_TREE ;ulong of_data =0 ;#endif
Signature · 1 line
1.5.3.6
PATCH 1/1 Make it possible to use a builtin OF tree.
Quoted 20 lines · Joakim Tjernlund
Signed-off-by Joakim Tjernlund <[email protected]>--- common/cmd_bootm.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-)common/cmd_bootm.c +3
-0@@ -507,6 +507,9 @@ fixup_silent_linux ()#endif /* CONFIG_SILENT_CONSOLE */ #ifdef CONFIG_PPC +#ifndef DEFAULT_OF_TREE +#define DEFAULT_OF_TREE NULL +#endif static void __attribute__((noinline)) do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
common/cmd_bootm.c do_bootm_linux (cmd_tbl_t *cmdtp, int flag, · line 535
Quoted 7 lines
common/cmd_bootm.c +1
-1@@ -527,7 +530,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag,void (*kernel)(bd_t *,ulong ,ulong ,ulong ,ulong );image_header_t *hdr = &header;#if defined(CONFIG_OF_FLAT_TREE ) || defined(CONFIG_OF_LIBFDT ) -char *of_flat_tree =NULL ; +char *of_flat_tree =DEFAULT_OF_TREE ;ulong of_data =0 ;#endif
The loss was most likely my error/misunderstanding way back at the start of LIBFDT. Your change seems reasonable, I'll add it to my list of patches to look into and add.
Thanks,
gvb
PATCH 1/1 Make it possible to use a builtin OF tree.
Quoted 33 lines · Jerry Van Baren
Quoted 20 lines · Joakim Tjernlund
Signed-off-by Joakim Tjernlund <[email protected]>--- common/cmd_bootm.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-)common/cmd_bootm.c +3
-0@@ -507,6 +507,9 @@ fixup_silent_linux ()#endif /* CONFIG_SILENT_CONSOLE */ #ifdef CONFIG_PPC +#ifndef DEFAULT_OF_TREE +#define DEFAULT_OF_TREE NULL +#endif static void __attribute__((noinline)) do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],common/cmd_bootm.c do_bootm_linux (cmd_tbl_t *cmdtp, int flag, · line 535
Quoted 7 lines
common/cmd_bootm.c +1
-1@@ -527,7 +530,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag,void (*kernel)(bd_t *,ulong ,ulong ,ulong ,ulong );image_header_t *hdr = &header;#if defined(CONFIG_OF_FLAT_TREE ) || defined(CONFIG_OF_LIBFDT ) -char *of_flat_tree =NULL ; +char *of_flat_tree =DEFAULT_OF_TREE ;ulong of_data =0 ;#endif The loss was most likely my error/misunderstanding way back at the start of LIBFDT. Your change seems reasonable, I'll add it to my list of patches to look into and add.
Quoted 2 lines
Thanks,
gvb
Hi Joakim,
I looked for the definition of DEFAULT_OF_TREE and it doesn't exist in the current u-boot. I used the gitweb "pickaxe" to look for DEFAULT_OF_TREE and didn't find it that way either. Can you identify when we lost the definition?
The problem with your patch is that, if DEFAULT_OF_TREE isn't defined by somebody, the builds will break. Since it is undefined at the moment, that means *all* of the OF_FLAT_TREE and OF_LIBFDT builds would break. :-(
Thanks,
gvb
PATCH 1/1 Make it possible to use a builtin OF tree.
Quoted 37 lines · gvb.uboot
Quoted 33 lines · Jerry Van Baren
Quoted 20 lines · Joakim Tjernlund
Signed-off-by Joakim Tjernlund <[email protected]>--- common/cmd_bootm.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-)common/cmd_bootm.c +3
-0@@ -507,6 +507,9 @@ fixup_silent_linux ()#endif /* CONFIG_SILENT_CONSOLE */ #ifdef CONFIG_PPC +#ifndef DEFAULT_OF_TREE +#define DEFAULT_OF_TREE NULL +#endif static void __attribute__((noinline)) do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],common/cmd_bootm.c do_bootm_linux (cmd_tbl_t *cmdtp, int flag, · line 535
Quoted 7 lines
common/cmd_bootm.c +1
-1@@ -527,7 +530,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag,void (*kernel)(bd_t *,ulong ,ulong ,ulong ,ulong );image_header_t *hdr = &header;#if defined(CONFIG_OF_FLAT_TREE ) || defined(CONFIG_OF_LIBFDT ) -char *of_flat_tree =NULL ; +char *of_flat_tree =DEFAULT_OF_TREE ;ulong of_data =0 ;#endif The loss was most likely my error/misunderstanding way back at the start of LIBFDT. Your change seems reasonable, I'll add it to my list of patches to look into and add.
Quoted 2 lines
Thanks,
gvb
Quoted 6 lines
Hi Joakim,
I looked for the definition of
DEFAULT_OF_TREEand it doesn't exist in the current u-boot. I used the gitweb "pickaxe" to look forDEFAULT_OF_TREEand didn't find it that way either. Can you identify when we lost the definition?
Not really, it was possible in u-boot 1.1.4 and now it is not.
Quoted 4 lines
The problem with your patch is that, if
DEFAULT_OF_TREEisn't defined by somebody, the builds will break. Since it is undefined at the moment, that means *all* of theOF_FLAT_TREEandOF_LIBFDTbuilds would break. :-(
ehh, doesn't the
#ifndef DEFAULT_OF_TREE
#define DEFAULT_OF_TREE NULL
#endif
take care of that?
Jocke
PATCH 1/1 Make it possible to use a builtin OF tree.
Quoted 10 lines
Quoted 10 lines
Quoted 7 lines
The loss was most likely my error/misunderstanding way back at the start
of LIBFDT. Your change seems reasonable, I'll add it to my list of patches to look into and add.Thanks,
gvbHi Joakim,
Quoted 7 lines
Quoted 5 lines
I looked for the definition of
DEFAULT_OF_TREEand it doesn't exist in
the current u-boot. I used the gitweb "pickaxe" to look forDEFAULT_OF_TREEand didn't find it that way either. Can you identify when we lost the definition?Not really, it was possible in u-boot 1.1.4 and now it is not.
This was dropped because Wolfgang was exist embedding device tree's in the u-boot source tree.
- k
PATCH 1/1 Make it possible to use a builtin OF tree.
Quoted 16 lines · Kumar Gala
Quoted 16 lines
Quoted 15 lines
Quoted 7 lines
The loss was most likely my error/misunderstanding way back at the start
of LIBFDT. Your change seems reasonable, I'll add it to my list of patches to look into and add.Thanks,
gvbHi Joakim,
I looked for the definition of
DEFAULT_OF_TREEand it doesn't exist in
the current u-boot. I used the gitweb "pickaxe" to look forDEFAULT_OF_TREEand didn't find it that way either. Can you identify when we lost the definition?
Quoted 4 lines
Quoted 1 line
Not really, it was possible in u-boot 1.1.4 and now it is not.
This was dropped because Wolfgang was exist embedding device tree's in the u-boot source tree.
hmm, I got a vague memory about that too. As I recall Wolfgang didn't motivate why that did make sense to me. Wolfgang, can you recap.?
Jocke
PATCH 1/1 Make it possible to use a builtin OF tree.
In reply to Joakim TjernlundQuoted 11 lines · Joakim Tjernlund
Signed-off-by Joakim Tjernlund <[email protected]>--- common/cmd_bootm.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-)common/cmd_bootm.c +0
-0
common/cmd_bootm.c fixup_silent_linux () · line 512
Quoted 6 lines
common/cmd_bootm.c +3
-0@@ -507,6 +507,9 @@ fixup_silent_linux ()#endif /* CONFIG_SILENT_CONSOLE */ #ifdef CONFIG_PPC +#ifndef DEFAULT_OF_TREE +#define DEFAULT_OF_TREE NULL +#endif
Where is DEFAULT_OF_TREE intended to be defined? I don't want to get into defining it in any of the include/configs/*.h files since the goal is to move over to a Kconfig system and eliminate the per-board config files entirely.
It might be better to do this with two linker symbols around a .dtb section. If the two symbols are identical, then no dtb was provided. Otherwise, go ahead and use the section as the default dtb.
Cheers,
g.
Signature · 4 lines
Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. grant.likely at secretlab.ca (403) 399-0195
PATCH 1/1 Make it possible to use a builtin OF tree.
Quoted 14 lines · Grant Likely
Quoted 13 lines · Joakim Tjernlund
Signed-off-by Joakim Tjernlund <[email protected]>--- common/cmd_bootm.c | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-)common/cmd_bootm.c +0
-0@@ -507,6 +507,9 @@ fixup_silent_linux ()#endif /* CONFIG_SILENT_CONSOLE */
Quoted 9 lines
common/cmd_bootm.c fixup_silent_linux () · line 512
Quoted 4 lines
common/cmd_bootm.c +3
-0#ifdef CONFIG_PPC +#ifndef DEFAULT_OF_TREE +#define DEFAULT_OF_TREE NULL +#endif Where is
DEFAULT_OF_TREEintended to be defined? I don't want to get into defining it in any of theinclude/configs/*.hfiles since the goal is to move over to aKconfigsystem and eliminate the per-board config files entirely.
You define it to whatever you like in your board config file. Can be a char array or a function returning a char ptr, sorry :(
Quoted 4 lines
It might be better to do this with two linker symbols around a .dtb section. If the two symbols are identical, then no dtb was provided. Otherwise, go ahead and use the section as the default dtb.
I feel my current way is more flexible as it allows you build/modify the tree in a function.
Jocke