2.6.23: does it supposed to work on an i486?
I tried to upgrade one of our ooooold machines (used as print servers and similar tasks) today from 2.6.22 to 2.6.23[.9]. The same config (with minor tweaks for new options), i486 base arch, X86_GENERIC=y.
The result is immediately machine reboot right after bootloader (etherboot) passes control to the kernel -- BEFORE "Uncompressing linux" message.
2.6.22 worked just fine.
So I wonder if it's supposed to work in the first place. The thing is that this machine(s) are very slow to boot, so trying to figure out which change is at question will require quite some time...
Thanks.
/mjt
H. Peter Anvin
reviewerQuoted 11 lines · Michael Tokarev
I tried to upgrade one of our ooooold machines (used as print servers and similar tasks) today from 2.6.22 to 2.6.23[.9]. The same config (with minor tweaks for new options), i486 base arch, X86_GENERIC=y.
The result is immediately machine reboot right after bootloader (etherboot) passes control to the kernel -- BEFORE "Uncompressing linux" message.
Quoted 6 lines
2.6.22 worked just fine.
So I wonder if it's supposed to work in the first place. The thing is that this machine(s) are very slow to boot, so trying to figure out which change is at question will require quite some time...
It looks like 2.6.23.9 is missing checkin 7ed192906a2144ebc8ca2925a85d27b9c5355668 from Linus' tree (attached), which is necessary to work on 386 and 486.
-hpa
Quoted 1 line
From
7ed192906a2144ebc8ca2925a85d27b9c5355668Mon Sep 17 00:00:00 2001
From: H. Peter Anvin <[email protected]>
Date: Sun, 4 Nov 2007 17:50:12 -0800
Subject: [PATCH] x86 setup: add a near jump to serialize %cr0 on 386/486
The 386 and 486 needs a jump immediately after setting %cr0 in order to serialize the pipeline.
--- arch/x86/boot/pmjump.S | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
arch/x86/boot/pmjump.S +2 -2
@@ -31,14 +31,14 @@ protected_mode_jump: xorl %ebx, %ebx # Flag to indicate this is a boot movl %edx, %esi # Pointer to boot_params table movl %eax, 2f # Patch ljmpl instruction - jmp 1f # Short jump to flush instruction q. -1: movw $__BOOT_DS, %cx movl %cr0, %edx orb $1, %dl # Protected mode (PE) bit movl %edx, %cr0 + jmp 1f # Short jump to serialize on 386/486 +1: movw %cx, %ds movw %cx, %es
Signature · 1 line
1.5.3.4
Quoted 1 line · H. Peter Anvin
Michael Tokarev wrote:
[2.6.23 on an i486 machine]
Quoted 6 lines
Quoted 6 lines
The result is immediately machine reboot right
after bootloader (etherboot) passes control to
the kernel -- BEFORE "Uncompressing linux"
message.2.6.22 worked just fine.
[]
Quoted 3 lines
It looks like 2.6.23.9 is missing checkin
7ed192906a2144ebc8ca2925a85d27b9c5355668from Linus' tree (attached), which is necessary to work on 386 and 486.
Well, I applied the patch (in 2.6.23 it's
arch/i386/boot/pmjump.S,
not
arch/x86/boot/pmjump.S,
but that's minor) - still the same behavior, it still reboots instantly right when bootloader gave control to the kernel. So it must be something else.. ;)
I'll try other kernels tomorrow, given some time (I already spent almost the whole day today with this "machine"). This whole story prompted me to just throw those machines away and replace them with tiny devices (a small print server in this case). There are still several 486-class machines out there...
By the way, this very machine I'm experimenting with is a strange beast by itself. For example, etherboot does not work on it properly, anything since version 5.1.0 just freezes right after displaying the "greeting" message. 5.0.11 works. However till now, linux worked on it just fine, -- unlike etherboot.
Thanks!
/mjt
H. Peter Anvin
reviewerQuoted 11 lines · Michael Tokarev
Quoted 3 lines
It looks like 2.6.23.9 is missing checkin
7ed192906a2144ebc8ca2925a85d27b9c5355668from Linus' tree (attached), which is necessary to work on 386 and 486.Well, I applied the patch (in 2.6.23 it's
arch/i386/boot/pmjump.S,
not
arch/x86/boot/pmjump.S,
but that's minor) - still the same behavior, it still reboots instantly right when bootloader gave control to the kernel. So it must be something else.. ;)
Well, it's a good bet it's croaking somewhere in the setup code (arch/{i386,x86}/boot). Putting debugging statements there might help.
-hpa
Quoted 7 lines
Well, I applied the patch (in 2.6.23 it's
arch/i386/boot/pmjump.S,
not
arch/x86/boot/pmjump.S,
but that's minor) - still the same behavior, it still reboots instantly right when bootloader gave control to the kernel. So it must be something else.. ;)
It should be x86, they merged the i386 and x86_64 code into one arch
called x86. Try it again and see if it works
Thanks,
- Jerry