Skip to contentSkip to conversation

prevent sending wrong signals to a traced process whose tracer gets killed

PATCH In review Petr Tesarik 1 participant 2 messages Dec 4, 2007 – Dec 5, 2007 ptrace support

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 prevent sending wrong signals to a traced process whose tracer gets killed

Hi,

I experienced troubles when tracing a process with strace. Sometimes, when I killed the strace process (SIGKILL), the traced process was also killed. I found out that it was getting SIGTRAP and, indeed, when the traced process set up a signal handler for SIGTRAP, it no longer died.

I noticed that normally, when the traced process is continued (via PTRACE_CONT or similar), the signal to be sent to it is stored in current->exit_code, which is then examined by the arch-specific code and usually leads to something like:

                send_sig(current->exit_code, current, 1);

The exit_code is set in ptrace_stop(), but the tracing process may go away while the traced process waits for it, and in that case exit_code is left as-is. I think we must set it to zero in ptrace_untrace().

 ptrace.c |    1 +
 1 file changed, 1 insertion(+)
kernel/ptrace.c +1 -0
diff -pru a/kernel/ptrace.c b/kernel/ptrace.c
@@ -52,6 +52,7 @@ void ptrace_untrace(struct task_struct *
 {
 	spin_lock(&child->sighand->siglock);
 	if (child->state == TASK_TRACED) {
+		child->exit_code = 0;
 		if (child->signal->flags & SIGNAL_STOP_STOPPED) {
 			child->state = TASK_STOPPED;
 		} else {
#1 lore raw
Quoted 12 lines · Petr Tesarik

Hi,

I experienced troubles when tracing a process with strace. Sometimes, when I killed the strace process (SIGKILL), the traced process was also killed. I found out that it was getting SIGTRAP and, indeed, when the traced process set up a signal handler for SIGTRAP, it no longer died.

I noticed that normally, when the traced process is continued (via PTRACE_CONT or similar), the signal to be sent to it is stored in current->exit_code, which is then examined by the arch-specific code and usually leads to something like:

Quoted 5 lines
                send_sig(current->exit_code, current, 1);

The exit_code is set in ptrace_stop(), but the tracing process may go away while the traced process waits for it, and in that case exit_code is left as-is. I think we must set it to zero in ptrace_untrace().

My patch was very wrong, but at least I produced a test case. It fails on all systems I could test. The only correct solution (TM) could be achieved if we could tell the tracee in ptrace_stop() that the tracer actually died and it should use nostop_code instead of exit_code. Possibly a new flag?

Regards,
Petr Tesarik

/*
* Author: Petr Tesarik <[email protected]>
*
* This program tests what happens when the tracer goes away while
* the tracee is waiting for it.
*
* A successful run should produce output like this:
*
* Started child 4206
* Attached process 4206
*
* OK
* Parent terminated with exit code 0
*
* A failed run looks like this:
*
* Started child 4318
* Attached process 4318
* Parent terminated with exit code 0
* Child died unexpectedly
*
* The exit status is:

 *   0 (TEST_OK)	success
 *   1 (TEST_FAILED)	the test failed
 *   2 (TEST_ABORTED)	unexpected failure prevented the test

* to be performed
*/

#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <unistd.h>
#include <sys/time.h>
#include <time.h>
#include <signal.h>
#include <sys/ptrace.h>

#define TEST_OK 0
#define TEST_FAILED 1
#define TEST_ABORTED 2

int run_child()

{
	struct timeval tv;

	if (ptrace(PTRACE_TRACEME, 0, 0, 0)) {
		perror("PTRACE_TRACEME");
		return TEST_ABORTED;
	}
	raise(SIGSTOP);

	gettimeofday(&tv, NULL);

	puts("\nOK");
	return TEST_OK;
}

int ptrace_wait(pid_t pid, char *who)

{
	int status;

	if (waitpid(pid, &status, WUNTRACED) == -1) {
		perror("waitpid for ptrace");
		return TEST_ABORTED;
	}

	if (WIFEXITED(status)) {
		printf("%s terminated with code %d\n",
		       who, WEXITSTATUS(status));
		return WEXITSTATUS(status);
	} else if (WIFSIGNALED(status)) {
		printf("%s got signal %d\n", who, WTERMSIG(status));
		return TEST_ABORTED;
	} else if (!WIFSTOPPED(status)) {
		printf("%s died with status %d\n", who, status);
		return TEST_ABORTED;
	}

	return TEST_OK;
}

int run_parent()

{
	pid_t childpid;
	int ret;

	if (!(childpid = fork()))
		return run_child();

	printf("Started child %d\n", childpid);

	if ((ret = ptrace_wait(childpid, "Child")))
		return ret;

	printf("Attached process %d\n", childpid);

	if (ptrace(PTRACE_SYSCALL, childpid, 0, SIGCONT)) {
		perror("PTRACE_SYSCALL child");
		return TEST_ABORTED;
	}

	/* The rest of this function is artificial, but I
	 * could achieve similar effects by sending a SIGKILL
	 * to strace of a heavily multithreaded application.
	 */

	/* Give the child some time to get into TASK_TRACED */
	sleep(1);
	/* do not detach from child and exit */
	return TEST_OK;
}

#define BUFSIZE 512

int copy_stdout(int fd)

{
	FILE *f;
	static char line[BUFSIZE];
	int ret = TEST_FAILED;

	if (! (f = fdopen(fd, "r"))) {
		perror("fdopen");
		return TEST_ABORTED;
	}

	while (fgets(line, BUFSIZE, f)) {
		if (!strcmp(line, "OK\n"))
			ret = TEST_OK;
		fputs(line, stdout);
	}

	return ret;
}

int run_checker(pid_t pid, int fd)

{
	int status;
	int ret;

	ret = copy_stdout(fd);

	/* Wait for the parent process to terminate */
	if (waitpid(pid, &status, 0) == -1) {
		perror("waitpid parent");
		return TEST_ABORTED;
	}

	if (WIFEXITED(status)) {
		int exitcode = WEXITSTATUS(status);

		printf("Parent terminated with exit code %d\n", exitcode);
		if (exitcode == TEST_OK && ret == TEST_FAILED)
			printf("Child died unexpectedly\n");
		if (ret < exitcode)
			ret = exitcode;
	} else {
		if (WIFSIGNALED(status))
			printf("Parent got signal %d\n", WTERMSIG(status));
		else
			printf("Parent died with status %d\n", status);
		if (ret < TEST_ABORTED)
			ret = TEST_ABORTED;
	}

	return ret;
}

int main()

{
	pid_t pid;
	int fds[2];

	if (pipe(fds)) {
		perror("pipe");
		return TEST_ABORTED;
	}

	if ((pid = fork())) {
		/* If closing the write side of the pipe fails,
		 * copy_stdout() will never reach EOF, so this
		 * is fairly important.
		 */
		if (close(fds[1])) {
			perror("close");
			return TEST_ABORTED;
		}

		return run_checker(pid, fds[0]);
	} else {
		if (dup2(fds[1], 1) == -1) {
			perror("dup2");
			return TEST_ABORTED;
		}
		setlinebuf(stdout);

		/* I don't care if these closes fail... */
		close(fds[0]);
		close(fds[1]);

		return run_parent();
	}
}