clk: zynqmp: Fix stack-out-of-bounds in strncpy`
Subsystems (18)
Sasha Levin
maintainerPATCH 1/47 clk: zynqmp: Fix stack-out-of-bounds in strncpy`
From: Ian Nam <[email protected]>
[ Upstream commit dd80fb2dbf1cd8751efbe4e53e54056f56a9b115 ]
"BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68"
Linux-ATF interface is using 16 bytes of SMC payload. In case clock name is longer than 15 bytes, string terminated NULL character will not be received by Linux. Add explicit NULL character at last byte to fix issues when clock name is longer.
This fixes below bug reported by KASAN:
==================================================================
BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68 Read of size 1 at addr ffff0008c89a7410 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.0-00396-g81ef9e7-dirty #3 Hardware name: Xilinx Versal vck190 Eval board revA (QSPI) (DT) Call trace: dump_backtrace+0x0/0x1e8 show_stack+0x14/0x20 dump_stack+0xd4/0x108 print_address_description.isra.0+0xbc/0x37c __kasan_report+0x144/0x198 kasan_report+0xc/0x18 __asan_load1+0x5c/0x68 strncpy+0x30/0x68 zynqmp_clock_probe+0x238/0x7b8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 __device_attach_driver+0xc4/0xe8 bus_for_each_drv+0xec/0x150 __device_attach+0x160/0x1d8 device_initial_probe+0x10/0x18 bus_probe_device+0xe0/0xf0 device_add+0x528/0x950 of_device_add+0x5c/0x80 of_platform_device_create_pdata+0x120/0x168 of_platform_bus_create+0x244/0x4e0 of_platform_populate+0x50/0xe8 zynqmp_firmware_probe+0x370/0x3a8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 device_driver_attach+0x94/0xa0 __driver_attach+0x70/0x108 bus_for_each_dev+0xe4/0x158 driver_attach+0x30/0x40 bus_add_driver+0x21c/0x2b8 driver_register+0xbc/0x1d0 __platform_driver_register+0x7c/0x88 zynqmp_firmware_driver_init+0x1c/0x24 do_one_initcall+0xa4/0x234 kernel_init_freeable+0x1b0/0x24c kernel_init+0x10/0x110 ret_from_fork+0x10/0x18 The buggy address belongs to the page: page:ffff0008f9be1c88 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 raw: 0008d00000000000 ffff0008f9be1c90 ffff0008f9be1c90 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff page dumped because: kasan: bad access detected
addr ffff0008c89a7410 is located in stack of task swapper/0/1 at offset 112 in frame:
zynqmp_clock_probe+0x0/0x7b8
this frame has 3 objects:
[32, 44) 'response'
[64, 80) 'ret_payload'
[96, 112) 'name'
Memory state around the buggy address:
ffff0008c89a7300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff0008c89a7380: 00 00 00 00 f1 f1 f1 f1 00 04 f2 f2 00 00 f2 f2
>ffff0008c89a7400: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
^
ffff0008c89a7480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff0008c89a7500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================--- drivers/clk/zynqmp/clkc.c | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/clk/zynqmp/clkc.c +7 -0
@@ -710,6 +710,13 @@ static void zynqmp_get_clock_info(void)FIELD_PREP (CLK_ATTR_NODE_INDEX , i);zynqmp_pm_clock_get_name (clock[i].clk_id, &name); + +/* +* Terminate with NULL character in case name provided by firmware +* is longer and truncated due to size limit. +*/ + name.name[sizeof (name.name) -1 ] ='\0' ; +if (!strcmp (name.name,RESERVED_CLK_NAME ))continue ;strncpy (clock[i].clk_name, name.name,MAX_NAME_LEN );
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 2/47 media: cx88: Fix a null-ptr-deref bug in buffer_prepare()
From: Zheyu Ma <[email protected]>
[ Upstream commit 2b064d91440b33fba5b452f2d1b31f13ae911d71 ]
When the driver calls cx88_risc_buffer() to prepare the buffer, the function call may fail, resulting in a empty buffer and null-ptr-deref later in buffer_queue().
The following log can reveal it:
[ 41.822762] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI [ 41.824488] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 41.828027] RIP: 0010:buffer_queue+0xc2/0x500 [ 41.836311] Call Trace: [ 41.836945] __enqueue_in_driver+0x141/0x360 [ 41.837262] vb2_start_streaming+0x62/0x4a0 [ 41.838216] vb2_core_streamon+0x1da/0x2c0 [ 41.838516] __vb2_init_fileio+0x981/0xbc0 [ 41.839141] __vb2_perform_fileio+0xbf9/0x1120 [ 41.840072] vb2_fop_read+0x20e/0x400 [ 41.840346] v4l2_read+0x215/0x290 [ 41.840603] vfs_read+0x162/0x4c0
Fix this by checking the return value of cx88_risc_buffer()
[hverkuil: fix coding style issues]
--- drivers/media/pci/cx88/cx88-vbi.c | 9 +++--- drivers/media/pci/cx88/cx88-video.c | 43 +++++++++++++++-------------- 2 files changed, 26 insertions(+), 26 deletions(-)
drivers/media/pci/cx88/cx88-vbi.c +4 -5
@@ -144,11 +144,10 @@ static int buffer_prepare(struct vb2_buffer *vb)return -EINVAL ;vb2_set_plane_payload (vb,0 , size); -cx88_risc_buffer (dev->pci, &buf->risc, sgt->sgl, -0 ,VBI_LINE_LENGTH * lines, -VBI_LINE_LENGTH ,0 , - lines); -return 0 ; +return cx88_risc_buffer (dev->pci, &buf->risc, sgt->sgl, +0 ,VBI_LINE_LENGTH * lines, +VBI_LINE_LENGTH ,0 , + lines); }static void buffer_finish (struct vb2_buffer *vb)
drivers/media/pci/cx88/cx88-video.c +22 -21
70 lines not on this page · raw message
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 3/47 media: platform: fix some double free in meson-ge2d and mtk-jpeg and s5p-mfc
In reply to Sasha LevinFrom: Hangyu Hua <[email protected]>
[ Upstream commit c65c3f3a2cbf21ed429d9b9c725bdb5dc6abf4cf ]
video_unregister_device will release device internally. There is no need to call video_device_release after video_unregister_device.
--- drivers/media/platform/meson/ge2d/ge2d.c | 1 - drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 1 - drivers/media/platform/s5p-mfc/s5p_mfc.c | 3 +-- 3 files changed, 1 insertion(+), 4 deletions(-)
drivers/media/platform/meson/ge2d/ge2d.c +0 -1
@@ -1032,7 +1032,6 @@ static int ge2d_remove(struct platform_device *pdev)video_unregister_device (ge2d->vfd);v4l2_m2m_release (ge2d->m2m_dev); -video_device_release (ge2d->vfd);v4l2_device_unregister (&ge2d->v4l2_dev);clk_disable_unprepare (ge2d->clk);
drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c +0 -1
@@ -1457,7 +1457,6 @@ static int mtk_jpeg_remove(struct platform_device *pdev)pm_runtime_disable (&pdev->dev);video_unregister_device (jpeg->vdev); -video_device_release (jpeg->vdev);v4l2_m2m_release (jpeg->m2m_dev);v4l2_device_unregister (&jpeg->v4l2_dev);mtk_jpeg_clk_release (jpeg);
drivers/media/platform/s5p-mfc/s5p_mfc.c +1 -2
@@ -1406,6 +1406,7 @@ static int s5p_mfc_probe(struct platform_device *pdev)/* Deinit MFC if probe had failed */ err_enc_reg:video_unregister_device (dev->vfd_dec); + dev->vfd_dec =NULL ; err_dec_reg:video_device_release (dev->vfd_enc); err_enc_alloc:
@@ -1451,8 +1452,6 @@ static int s5p_mfc_remove(struct platform_device *pdev)video_unregister_device (dev->vfd_enc);video_unregister_device (dev->vfd_dec); -video_device_release (dev->vfd_enc); -video_device_release (dev->vfd_dec);v4l2_device_unregister (&dev->v4l2_dev);s5p_mfc_unconfigure_dma_memory (dev);
Signature · 7 lines
2.35.1 _______________________________________________ linux-amlogic mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-amlogic
Sasha Levin
maintainerPATCH 4/47 clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rate
In reply to Sasha LevinFrom: Quanyang Wang <[email protected]>
[ Upstream commit 30eaf02149ecc3c5815e45d27187bf09e925071d ]
The function zynqmp_pll_round_rate is used to find a most appropriate PLL frequency which the hardware can generate according to the desired frequency. For example, if the desired frequency is 297MHz, considering the limited range from PS_PLL_VCO_MIN (1.5GHz) to PS_PLL_VCO_MAX (3.0GHz) of PLL, zynqmp_pll_round_rate should return 1.872GHz (297MHz * 5).
There are two problems with the current code of zynqmp_pll_round_rate:
1) When the rate is below PS_PLL_VCO_MIN, it can't find a correct rate when the parameter "rate" is an integer multiple of *prate, in other words, if "f" is zero, zynqmp_pll_round_rate won't return a valid frequency which is from PS_PLL_VCO_MIN to PS_PLL_VCO_MAX. For example, *prate is 33MHz and the rate is 660MHz, zynqmp_pll_round_rate will not boost up rate and just return 660MHz, and this will cause clk_calc_new_rates failure since zynqmp_pll_round_rate returns an invalid rate out of its boundaries.
2) Even if the rate is higher than PS_PLL_VCO_MIN, there is still a risk that zynqmp_pll_round_rate returns an invalid rate because the function DIV_ROUND_CLOSEST makes some loss in the fractional part. If the parent clock *prate is 33333333Hz and we want to set the PLL rate to 1.5GHz, this function will return 1499999985Hz by using the formula below:
value = *prate * DIV_ROUND_CLOSEST(rate, *prate)).
This value is also invalid since it's slightly smaller than PS_PLL_VCO_MIN. because DIV_ROUND_CLOSEST makes some loss in the fractional part.
--- drivers/clk/zynqmp/pll.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-)
drivers/clk/zynqmp/pll.c +15 -16
@@ -102,26 +102,25 @@ static long zynqmp_pll_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) {u32 fbdiv; -long rate_div, f; +u32 mult, div; -/* Enable the fractional mode if needed */ - rate_div = (rate *FRAC_DIV ) / *prate; - f = rate_div %FRAC_DIV ; -if (f) { -if (rate >PS_PLL_VCO_MAX ) { - fbdiv = rate /PS_PLL_VCO_MAX ; - rate = rate / (fbdiv +1 ); - } -if (rate <PS_PLL_VCO_MIN ) { - fbdiv =DIV_ROUND_UP (PS_PLL_VCO_MIN , rate); - rate = rate * fbdiv; - } -return rate; +/* Let rate fall inside the range PS_PLL_VCO_MIN ~ PS_PLL_VCO_MAX */ +if (rate >PS_PLL_VCO_MAX ) { + div =DIV_ROUND_UP (rate,PS_PLL_VCO_MAX ); + rate = rate / div; + } +if (rate <PS_PLL_VCO_MIN ) { + mult =DIV_ROUND_UP (PS_PLL_VCO_MIN , rate); + rate = rate * mult; } fbdiv =DIV_ROUND_CLOSEST (rate, *prate); - fbdiv =clamp_t (u32, fbdiv,PLL_FBDIV_MIN ,PLL_FBDIV_MAX ); -return *prate * fbdiv; +if (fbdiv <PLL_FBDIV_MIN || fbdiv >PLL_FBDIV_MAX ) { + fbdiv =clamp_t (u32, fbdiv,PLL_FBDIV_MIN ,PLL_FBDIV_MAX ); + rate = *prate * fbdiv; + } + +return rate; }/**
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 5/47 usb: host: xhci-plat: suspend and resume clocks
In reply to Sasha LevinFrom: Justin Chen <[email protected]>
[ Upstream commit 8bd954c56197caf5e3a804d989094bc3fe6329aa ]
Introduce XHCI_SUSPEND_RESUME_CLKS quirk as a means to suspend and resume clocks if the hardware is capable of doing so. We assume that clocks will be needed if the device may wake.
--- drivers/usb/host/xhci-plat.c | 16 +++++++++++++++- drivers/usb/host/xhci.h | 1 + 2 files changed, 16 insertions(+), 1 deletion(-)
drivers/usb/host/xhci-plat.c +15 -1
@@ -447,7 +447,16 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev)* xhci_suspend() needs `do_wakeup` to know whether host is allowed * to do wakeup during suspend. */ -return xhci_suspend (xhci,device_may_wakeup (dev)); + ret =xhci_suspend (xhci,device_may_wakeup (dev)); +if (ret) +return ret; + +if (!device_may_wakeup (dev) && (xhci->quirks &XHCI_SUSPEND_RESUME_CLKS )) { +clk_disable_unprepare (xhci->clk); +clk_disable_unprepare (xhci->reg_clk); + } + +return 0 ; }static int __maybe_unused xhci_plat_resume (struct device *dev)
@@ -456,6 +465,11 @@ static int __maybe_unused xhci_plat_resume(struct device *dev)struct xhci_hcd *xhci =hcd_to_xhci (hcd);int ret; +if (!device_may_wakeup (dev) && (xhci->quirks &XHCI_SUSPEND_RESUME_CLKS )) { +clk_prepare_enable (xhci->clk); +clk_prepare_enable (xhci->reg_clk); + } + ret =xhci_priv_resume_quirk (hcd);if (ret)return ret;
drivers/usb/host/xhci.h +1 -0
@@ -1903,6 +1903,7 @@ struct xhci_hcd {#define XHCI_NO_SOFT_RETRY BIT_ULL(40)#define XHCI_BROKEN_D3COLD BIT_ULL(41)#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42) +#define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43)unsigned int num_active_eps;unsigned int limit_active_eps;
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 6/47 usb: host: xhci-plat: suspend/resume clks for brcm
In reply to Sasha LevinFrom: Justin Chen <[email protected]>
[ Upstream commit c69400b09e471a3f1167adead55a808f0da6534a ]
The xhci_plat_brcm xhci block can enter suspend with clock disabled to save power and re-enable them on resume. Make use of the XHCI_SUSPEND_RESUME_CLKS quirk to do so.
--- drivers/usb/host/xhci-plat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/host/xhci-plat.c +1 -1
@@ -134,7 +134,7 @@ static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = { };static const struct xhci_plat_priv xhci_plat_brcm = { - .quirks =XHCI_RESET_ON_RESUME , + .quirks =XHCI_RESET_ON_RESUME |XHCI_SUSPEND_RESUME_CLKS , };static const struct of_device_id usb_xhci_of_match[] = {
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 7/47 dmaengine: ti: k3-udma: Reset UDMA_CHAN_RT byte counters to prevent overflow
In reply to Sasha LevinFrom: Vaishnav Achath <[email protected]>
[ Upstream commit 7c94dcfa8fcff2dba53915f1dabfee49a3df8b88 ]
UDMA_CHAN_RT_*BCNT_REG stores the real-time channel bytecount statistics. These registers are 32-bit hardware counters and the driver uses these counters to monitor the operational progress status for a channel, when transferring more than 4GB of data it was observed that these counters overflow and completion calculation of a operation gets affected and the transfer hangs indefinitely.
This commit adds changes to decrease the byte count for every complete transaction so that these registers never overflow and the proper byte count statistics is maintained for ongoing transaction by the RT counters.
Earlier uc->bcnt used to maintain a count of the completed bytes at driver side, since the RT counters maintain the statistics of current transaction now, the maintenance of uc->bcnt is not necessary.
--- drivers/dma/ti/k3-udma.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-)
drivers/dma/ti/k3-udma.c +17 -8
@@ -300,8 +300,6 @@ struct udma_chan {struct udma_tx_drain tx_drain; -u32 bcnt;/* number of bytes completed since the start of the channel */ -/* Channel configuration parameters */ struct udma_chan_config config;
@@ -757,6 +755,20 @@ static void udma_reset_rings(struct udma_chan *uc) } } +static void udma_decrement_byte_counters (struct udma_chan *uc,u32 val) +{ +if (uc->desc->dir ==DMA_DEV_TO_MEM ) { +udma_rchanrt_write (uc,UDMA_CHAN_RT_BCNT_REG , val); +udma_rchanrt_write (uc,UDMA_CHAN_RT_SBCNT_REG , val); +udma_rchanrt_write (uc,UDMA_CHAN_RT_PEER_BCNT_REG , val); + }else { +udma_tchanrt_write (uc,UDMA_CHAN_RT_BCNT_REG , val); +udma_tchanrt_write (uc,UDMA_CHAN_RT_SBCNT_REG , val); +if (!uc->bchan) +udma_tchanrt_write (uc,UDMA_CHAN_RT_PEER_BCNT_REG , val); + } +} +static void udma_reset_counters (struct udma_chan *uc) {u32 val;
@@ -790,8 +802,6 @@ static void udma_reset_counters(struct udma_chan *uc) val =udma_rchanrt_read (uc,UDMA_CHAN_RT_PEER_BCNT_REG );udma_rchanrt_write (uc,UDMA_CHAN_RT_PEER_BCNT_REG , val); } - - uc->bcnt =0 ; }static int udma_reset_chan (struct udma_chan *uc,bool hard)
@@ -1115,7 +1125,7 @@ static void udma_check_tx_completion(struct work_struct *work)if (uc->desc) {struct udma_desc *d = uc->desc; - uc->bcnt += d->residue; +udma_decrement_byte_counters (uc, d->residue);udma_start (uc);vchan_cookie_complete (&d->vd);break ;
@@ -1168,7 +1178,7 @@ static irqreturn_t udma_ring_irq_handler(int irq, void *data)vchan_cyclic_callback (&d->vd); }else {if (udma_is_desc_really_done (uc, d)) { - uc->bcnt += d->residue; +udma_decrement_byte_counters (uc, d->residue);udma_start (uc);vchan_cookie_complete (&d->vd); }else {
@@ -1204,7 +1214,7 @@ static irqreturn_t udma_udma_irq_handler(int irq, void *data)vchan_cyclic_callback (&d->vd); }else {/* TODO: figure out the real amount of data */ - uc->bcnt += d->residue; +udma_decrement_byte_counters (uc, d->residue);udma_start (uc);vchan_cookie_complete (&d->vd); }
@@ -3811,7 +3821,6 @@ static enum dma_status udma_tx_status(struct dma_chan *chan, bcnt =udma_tchanrt_read (uc,UDMA_CHAN_RT_BCNT_REG ); } - bcnt -= uc->bcnt;if (bcnt && !(bcnt % uc->desc->residue)) residue =0 ;else
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 8/47 scsi: 3w-9xxx: Avoid disabling device if failing to enable it
In reply to Sasha LevinFrom: Letu Ren <[email protected]>
[ Upstream commit 7eff437b5ee1309b34667844361c6bbb5c97df05 ]
The original code will "goto out_disable_device" and call pci_disable_device() if pci_enable_device() fails. The kernel will generate a warning message like "3w-9xxx 0000:00:05.0: disabling already-disabled device".
We shouldn't disable a device that failed to be enabled. A simple return is fine.
--- drivers/scsi/3w-9xxx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/3w-9xxx.c +1 -1
@@ -2006,7 +2006,7 @@ static int twa_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id) retval =pci_enable_device (pdev);if (retval) {TW_PRINTK (host,TW_DRIVER ,0x34 ,"Failed to enable pci device" ); - goto out_disable_device; +return -ENODEV ; }pci_set_master (pdev);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 9/47 nbd: Fix hung when signal interrupts nbd_start_device_ioctl()
In reply to Sasha LevinFrom: Shigeru Yoshida <[email protected]>
[ Upstream commit 1de7c3cf48fc41cd95adb12bd1ea9033a917798a ]
syzbot reported hung task [1]. The following program is a simplified version of the reproducer:
int main(void)
{
int sv[2], fd;
if (socketpair(AF_UNIX, SOCK_STREAM, 0, sv) < 0)
return 1;
if ((fd = open("/dev/nbd0", 0)) < 0)
return 1;
if (ioctl(fd, NBD_SET_SIZE_BLOCKS, 0x81) < 0)
return 1;
if (ioctl(fd, NBD_SET_SOCK, sv[0]) < 0)
return 1;
if (ioctl(fd, NBD_DO_IT) < 0)
return 1;
return 0;
}When signal interrupt nbd_start_device_ioctl() waiting the condition atomic_read(&config->recv_threads) == 0, the task can hung because it waits the completion of the inflight IOs.
This patch fixes the issue by clearing queue, not just shutdown, when signal interrupt nbd_start_device_ioctl().
--- drivers/block/nbd.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/block/nbd.c +4 -2
@@ -1351,10 +1351,12 @@ static int nbd_start_device_ioctl(struct nbd_device *nbd, struct block_device *bmutex_unlock (&nbd->config_lock); ret =wait_event_interruptible (config->recv_wq,atomic_read (&config->recv_threads) ==0 ); -if (ret) +if (ret) {sock_shutdown (nbd); -flush_workqueue (nbd->recv_workq); +nbd_clear_que (nbd); + } +flush_workqueue (nbd->recv_workq);mutex_lock (&nbd->config_lock);nbd_bdev_reset (bdev);/* user requested, ignore socket errors */
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 10/47 iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to identity
In reply to Sasha LevinFrom: Yicong Yang <[email protected]>
[ Upstream commit 24b6c7798a0122012ca848ea0d25e973334266b0 ]
The DMA operations of HiSilicon PTT device can only work properly with identical mappings. So add a quirk for the device to force the domain as passthrough.
--- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c +21 -0
@@ -2832,6 +2832,26 @@ static int arm_smmu_dev_disable_feature(struct device *dev, } } +/* +* HiSilicon PCIe tune and trace device can be used to trace TLP headers on the +* PCIe link and save the data to memory by DMA. The hardware is restricted to +* use identity mapping only. +*/ +#define IS_HISI_PTT_DEVICE (pdev) ((pdev)->vendor == PCI_VENDOR_ID_HUAWEI && \ + (pdev)->device == 0xa12e) + +static int arm_smmu_def_domain_type (struct device *dev) +{ +if (dev_is_pci (dev)) { +struct pci_dev *pdev =to_pci_dev (dev); + +if (IS_HISI_PTT_DEVICE (pdev)) +return IOMMU_DOMAIN_IDENTITY ; + } + +return 0 ; +} +static struct iommu_ops arm_smmu_ops = { .capable = arm_smmu_capable, .domain_alloc = arm_smmu_domain_alloc,
@@ -2857,6 +2877,7 @@ static struct iommu_ops arm_smmu_ops = { .sva_unbind = arm_smmu_sva_unbind, .sva_get_pasid = arm_smmu_sva_get_pasid, .page_response = arm_smmu_page_response, + .def_domain_type = arm_smmu_def_domain_type, .pgsize_bitmap = -1UL, /* Restricted during device attach */ .owner = THIS_MODULE, };
Signature · 1 line
2.35.1
Re: [PATCH AUTOSEL 5.15 10/47] iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to identity
Quoted 14 lines · Sasha Levin
From: Yicong Yang<[email protected]>
[ Upstream commit
24b6c7798a0122012ca848ea0d25e973334266b0]The DMA operations of HiSilicon PTT device can only work properly with identical mappings. So add a quirk for the device to force the domain as passthrough.
Acked-by Will Deacon<[email protected]>Signed-off-by Yicong Yang<[email protected]>Reviewed-by John Garry<[email protected]>Signed-off-by Mathieu Poirier<[email protected]>Signed-off-by Sasha Levin<[email protected]>
Quoted 3 lines
--- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
I don't think that this commit should be backported to any stable tree. It's only required for a new driver.
Thanks,
John
Sasha Levin
maintainerRe: [PATCH AUTOSEL 5.15 10/47] iommu/arm-smmu-v3: Make default domain type of HiSilicon PTT device to identity
Quoted 19 lines · John Garry
Quoted 14 lines · Sasha Levin
From: Yicong Yang<[email protected]>
[ Upstream commit
24b6c7798a0122012ca848ea0d25e973334266b0]The DMA operations of HiSilicon PTT device can only work properly with identical mappings. So add a quirk for the device to force the domain as passthrough.
Acked-by Will Deacon<[email protected]>Signed-off-by Yicong Yang<[email protected]>Reviewed-by John Garry<[email protected]>Signed-off-by Mathieu Poirier<[email protected]>Signed-off-by Sasha Levin<[email protected]>Quoted 3 lines
--- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
Quoted 1 line
I don't think that this commit should be backported to any stable tree. It's only required for a new driver.
I'll drop it, thanks!
Signature · 2 lines
Thanks, Sasha
Sasha Levin
maintainerPATCH 11/47 staging: rtl8712: Fix return type for implementation of ndo_start_xmit
In reply to Sasha LevinFrom: GUO Zihua <[email protected]>
[ Upstream commit 307d343620e1fc7a6a2b7a1cdadb705532c9b6a5 ]
CFI (Control Flow Integrity) is a safety feature allowing the system to detect and react should a potential control flow hijacking occurs. In particular, the Forward-Edge CFI protects indirect function calls by ensuring the prototype of function that is actually called matches the definition of the function hook.
Since Linux now supports CFI, it will be a good idea to fix mismatched return type for implementation of hooks. Otherwise this would get cought out by CFI and cause a panic.
Use enums from netdev_tx_t as return value instead, then change return type to netdev_tx_t.
--- drivers/staging/rtl8712/xmit_linux.c | 6 +++--- drivers/staging/rtl8712/xmit_osdep.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/staging/rtl8712/xmit_linux.c +3 -3
@@ -146,7 +146,7 @@ void r8712_xmit_complete(struct _adapter *padapter, struct xmit_frame *pxframe) pxframe->pkt =NULL ; } -int r8712_xmit_entry (_pkt *pkt,struct net_device *netdev) +netdev_tx_t r8712_xmit_entry (_pkt *pkt,struct net_device *netdev) {struct xmit_frame *xmitframe =NULL ;struct _adapter *adapter =netdev_priv (netdev);
@@ -171,11 +171,11 @@ int r8712_xmit_entry(_pkt *pkt, struct net_device *netdev) } xmitpriv->tx_pkts++; xmitpriv->tx_bytes += xmitframe->attrib.last_txcmdsz; -return 0 ; +return NETDEV_TX_OK ; _xmit_entry_drop:if (xmitframe)r8712_free_xmitframe (xmitpriv, xmitframe); xmitpriv->tx_drop++;dev_kfree_skb_any (pkt); -return 0 ; +return NETDEV_TX_OK ; }
drivers/staging/rtl8712/xmit_osdep.h +1 -1
@@ -34,7 +34,7 @@ struct sta_xmit_priv;struct xmit_frame ;struct xmit_buf ; -int r8712_xmit_entry (_pkt *pkt,struct net_device *pnetdev); +netdev_tx_t r8712_xmit_entry (_pkt *pkt,struct net_device *pnetdev);void r8712_SetFilter (struct work_struct *work);int r8712_xmit_resource_alloc (struct _adapter *padapter,struct xmit_buf *pxmitbuf);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 12/47 staging: rtl8192e: Fix return type for implementation of ndo_start_xmit
In reply to Sasha LevinFrom: GUO Zihua <[email protected]>
[ Upstream commit 513d9a61156d79dd0979c4ad400c8587f52cbb9d ]
CFI (Control Flow Integrity) is a safety feature allowing the system to detect and react should a potential control flow hijacking occurs. In particular, the Forward-Edge CFI protects indirect function calls by ensuring the prototype of function that is actually called matches the definition of the function hook.
Since Linux now supports CFI, it will be a good idea to fix mismatched return type for implementation of hooks. Otherwise this would get cought out by CFI and cause a panic.
Use enums from netdev_tx_t as return value instead, then change return type to netdev_tx_t. Note that rtllib_xmit_inter() would return 1 only on allocation failure and the queue is stopped if that happens, meeting the documented requirement if NETDEV_TX_BUSY should be returned by ndo_start_xmit.
--- drivers/staging/rtl8192e/rtllib.h | 2 +- drivers/staging/rtl8192e/rtllib_tx.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
drivers/staging/rtl8192e/rtllib.h +1 -1
@@ -1938,7 +1938,7 @@ int rtllib_encrypt_fragment(struct sk_buff *frag, int hdr_len); -int rtllib_xmit (struct sk_buff *skb,struct net_device *dev); +netdev_tx_t rtllib_xmit (struct sk_buff *skb,struct net_device *dev);void rtllib_txb_free (struct rtllib_txb *txb);/* rtllib_rx.c */
drivers/staging/rtl8192e/rtllib_tx.c +2 -2
@@ -964,9 +964,9 @@ static int rtllib_xmit_inter(struct sk_buff *skb, struct net_device *dev) } -int rtllib_xmit (struct sk_buff *skb,struct net_device *dev) +netdev_tx_t rtllib_xmit (struct sk_buff *skb,struct net_device *dev) {memset (skb->cb,0 ,sizeof (skb->cb)); -return rtllib_xmit_inter (skb, dev); +return rtllib_xmit_inter (skb, dev) ?NETDEV_TX_BUSY :NETDEV_TX_OK ; }EXPORT_SYMBOL (rtllib_xmit);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 13/47 power: supply: adp5061: fix out-of-bounds read in adp5061_get_chg_type()
In reply to Sasha LevinFrom: Wei Yongjun <[email protected]>
[ Upstream commit 9d47e01b9d807808224347935562f7043a358054 ]
ADP5061_CHG_STATUS_1_CHG_STATUS is masked with 0x07, which means a length of 8, but adp5061_chg_type array size is 4, may end up reading 4 elements beyond the end of the adp5061_chg_type[] array.
--- drivers/power/supply/adp5061.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/power/supply/adp5061.c +3 -3
@@ -427,11 +427,11 @@ static int adp5061_get_chg_type(struct adp5061_state *st,if (ret <0 )return ret; - chg_type = adp5061_chg_type[ADP5061_CHG_STATUS_1_CHG_STATUS (status1)]; -if (chg_type >ADP5061_CHG_FAST_CV ) + chg_type =ADP5061_CHG_STATUS_1_CHG_STATUS (status1); +if (chg_type >=ARRAY_SIZE (adp5061_chg_type)) val->intval =POWER_SUPPLY_STATUS_UNKNOWN ;else - val->intval = chg_type; + val->intval = adp5061_chg_type[chg_type];return ret; }
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 14/47 staging: vt6655: fix potential memory leak
In reply to Sasha LevinFrom: Nam Cao <[email protected]>
[ Upstream commit c8ff91535880d41b49699b3829fb6151942de29e ]
In function device_init_td0_ring, memory is allocated for member td_info of priv->apTD0Rings[i], with i increasing from 0. In case of allocation failure, the memory is freed in reversed order, with i decreasing to 0. However, the case i=0 is left out and thus memory is leaked.
Modify the memory freeing loop to include the case i=0.
--- drivers/staging/vt6655/device_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/vt6655/device_main.c +1 -1
@@ -676,7 +676,7 @@ static int device_init_td0_ring(struct vnt_private *priv)return 0 ; err_free_desc: -while (--i) { +while (i--) { desc = &priv->apTD0Rings[i];kfree (desc->td_info); }
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 15/47 blk-throttle: prevent overflow while calculating wait time
In reply to Sasha LevinFrom: Yu Kuai <[email protected]>
[ Upstream commit 8d6bbaada2e0a65f9012ac4c2506460160e7237a ]
There is a problem found by code review in tg_with_in_bps_limit() that 'bps_limit * jiffy_elapsed_rnd' might overflow. Fix the problem by calling mul_u64_u64_div_u64() instead.
--- block/blk-throttle.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
block/blk-throttle.c +3 -5
@@ -950,7 +950,7 @@ static bool tg_with_in_bps_limit(struct throtl_grp *tg, struct bio *bio, u64 bps_limit, unsigned long *wait) { bool rw = bio_data_dir(bio); -u64 bytes_allowed, extra_bytes, tmp; +u64 bytes_allowed, extra_bytes;unsigned long jiffy_elapsed, jiffy_wait, jiffy_elapsed_rnd;unsigned int bio_size =throtl_bio_data_size (bio);
@@ -967,10 +967,8 @@ static bool tg_with_in_bps_limit(struct throtl_grp *tg, struct bio *bio, jiffy_elapsed_rnd = tg->td->throtl_slice; jiffy_elapsed_rnd =roundup (jiffy_elapsed_rnd, tg->td->throtl_slice); - - tmp = bps_limit * jiffy_elapsed_rnd; -do_div (tmp,HZ ); - bytes_allowed = tmp; + bytes_allowed =mul_u64_u64_div_u64 (bps_limit, (u64 )jiffy_elapsed_rnd, + (u64 )HZ );if (tg->bytes_disp[rw] + bio_size <= bytes_allowed) {if (wait)
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 16/47 gpiolib: of: do not ignore requested index when applying quirks
In reply to Sasha LevinFrom: Dmitry Torokhov <[email protected]>
[ Upstream commit 98c3c940ea5c3957056717e8b77a91c7d94536ad ]
We should not ignore index passed into of_find_gpio() when handling quirks. While in practice this change will not have any effect, it will allow consolidate quirk handling.
--- drivers/gpio/gpiolib-of.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-)
drivers/gpio/gpiolib-of.c +19 -13
@@ -369,7 +369,9 @@ EXPORT_SYMBOL_GPL(gpiod_get_from_of_node);* properties should be named "foo-gpios" so we have this special kludge for * them. */ -static struct gpio_desc *of_find_spi_gpio (struct device *dev,const char *con_id, +static struct gpio_desc *of_find_spi_gpio (struct device *dev, +const char *con_id, +unsigned int idx,enum of_gpio_flags *of_flags) {char prop_name[32 ];/* 32 is max size of property name */
@@ -390,7 +392,7 @@ static struct gpio_desc *of_find_spi_gpio(struct device *dev, const char *con_id/* Will be "gpio-sck", "gpio-mosi" or "gpio-miso" */ snprintf (prop_name,sizeof (prop_name),"%s-%s" ,"gpio" , con_id); - desc =of_get_named_gpiod_flags (np, prop_name,0 , of_flags); + desc =of_get_named_gpiod_flags (np, prop_name, idx, of_flags);return desc; }
@@ -431,7 +433,9 @@ static struct gpio_desc *of_find_spi_cs_gpio(struct device *dev,* properties should be named "foo-gpios" so we have this special kludge for * them. */ -static struct gpio_desc *of_find_regulator_gpio (struct device *dev,const char *con_id, +static struct gpio_desc *of_find_regulator_gpio (struct device *dev, +const char *con_id, +unsigned int idx,enum of_gpio_flags *of_flags) {/* These are the connection IDs we accept as legacy GPIO phandles */
@@ -454,12 +458,13 @@ static struct gpio_desc *of_find_regulator_gpio(struct device *dev, const char *if (i <0 )return ERR_PTR (-ENOENT ); - desc =of_get_named_gpiod_flags (np, con_id,0 , of_flags); + desc =of_get_named_gpiod_flags (np, con_id, idx, of_flags);return desc; }static struct gpio_desc *of_find_arizona_gpio (struct device *dev,const char *con_id, +unsigned int idx,enum of_gpio_flags *of_flags) {if (!IS_ENABLED (CONFIG_MFD_ARIZONA ))
@@ -468,17 +473,18 @@ static struct gpio_desc *of_find_arizona_gpio(struct device *dev,if (!con_id ||strcmp (con_id,"wlf,reset" ))return ERR_PTR (-ENOENT ); -return of_get_named_gpiod_flags (dev->of_node, con_id,0 , of_flags); +return of_get_named_gpiod_flags (dev->of_node, con_id, idx, of_flags); }static struct gpio_desc *of_find_usb_gpio (struct device *dev,const char *con_id, +unsigned int idx,enum of_gpio_flags *of_flags) {/* -* Currently this USB quirk is only for the Fairchild FUSB302 host which is using -* an undocumented DT GPIO line named "fcs,int_n" without the compulsory "-gpios" -* suffix. +* Currently this USB quirk is only for the Fairchild FUSB302 host +* which is using an undocumented DT GPIO line named "fcs,int_n" +* without the compulsory "-gpios" suffix. */ if (!IS_ENABLED (CONFIG_TYPEC_FUSB302 ))return ERR_PTR (-ENOENT );
@@ -486,7 +492,7 @@ static struct gpio_desc *of_find_usb_gpio(struct device *dev,if (!con_id ||strcmp (con_id,"fcs,int_n" ))return ERR_PTR (-ENOENT ); -return of_get_named_gpiod_flags (dev->of_node, con_id,0 , of_flags); +return of_get_named_gpiod_flags (dev->of_node, con_id, idx, of_flags); } struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
@@ -515,7 +521,7 @@ struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,if (gpiod_not_found (desc)) {/* Special handling for SPI GPIOs if used */ - desc =of_find_spi_gpio (dev, con_id, &of_flags); + desc =of_find_spi_gpio (dev, con_id, idx, &of_flags); }if (gpiod_not_found (desc)) {
@@ -527,14 +533,14 @@ struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,if (gpiod_not_found (desc)) {/* Special handling for regulator GPIOs if used */ - desc =of_find_regulator_gpio (dev, con_id, &of_flags); + desc =of_find_regulator_gpio (dev, con_id, idx, &of_flags); }if (gpiod_not_found (desc)) - desc =of_find_arizona_gpio (dev, con_id, &of_flags); + desc =of_find_arizona_gpio (dev, con_id, idx, &of_flags);if (gpiod_not_found (desc)) - desc =of_find_usb_gpio (dev, con_id, &of_flags); + desc =of_find_usb_gpio (dev, con_id, idx, &of_flags);if (IS_ERR (desc))return desc;
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 17/47 gpiolib: of: make Freescale SPI quirk similar to all others
In reply to Sasha LevinFrom: Dmitry Torokhov <[email protected]>
[ Upstream commit 984914ec4f4bfa9ee8f067b06293bc12bef20137 ]
There is no need for of_find_spi_cs_gpio() to be different from other
quirks: the only variant of property actually used in DTS is "gpios" (plural) so we can use of_get_named_gpiod_flags() instead of recursing into of_find_gpio() again.
This will allow us consolidate quirk handling down the road.
--- drivers/gpio/gpiolib-of.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-)
drivers/gpio/gpiolib-of.c +4 -8
@@ -404,7 +404,7 @@ static struct gpio_desc *of_find_spi_gpio(struct device *dev,static struct gpio_desc *of_find_spi_cs_gpio (struct device *dev,const char *con_id,unsigned int idx, -unsigned long *flags) +enum of_gpio_flags *of_flags) {const struct device_node *np = dev->of_node;
@@ -425,7 +425,7 @@ static struct gpio_desc *of_find_spi_cs_gpio(struct device *dev,* uses just "gpios" so translate to that when "cs-gpios" is * requested. */ -return of_find_gpio (dev,NULL , idx, flags); +return of_get_named_gpiod_flags (dev->of_node,"gpios" , idx, of_flags); }/*
@@ -524,12 +524,8 @@ struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id, desc =of_find_spi_gpio (dev, con_id, idx, &of_flags); } -if (gpiod_not_found (desc)) { -/* This quirk looks up flags and all */ - desc =of_find_spi_cs_gpio (dev, con_id, idx, flags); -if (!IS_ERR (desc)) -return desc; - } +if (gpiod_not_found (desc)) + desc =of_find_spi_cs_gpio (dev, con_id, idx, &of_flags);if (gpiod_not_found (desc)) {/* Special handling for regulator GPIOs if used */
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 18/47 gpiolib: rework quirk handling in of_find_gpio()
In reply to Sasha LevinFrom: Dmitry Torokhov <[email protected]>
[ Upstream commit a2b5e207cade33b4d2dfd920f783f13b1f173e78 ]
Instead of having a string of "if" statements let's put all quirks into an array and iterate over them.
--- drivers/gpio/gpiolib-of.c | 62 ++++++++++++++++----------------------- 1 file changed, 26 insertions(+), 36 deletions(-)
drivers/gpio/gpiolib-of.c +26 -36
@@ -369,14 +369,12 @@ EXPORT_SYMBOL_GPL(gpiod_get_from_of_node);* properties should be named "foo-gpios" so we have this special kludge for * them. */ -static struct gpio_desc *of_find_spi_gpio (struct device *dev, +static struct gpio_desc *of_find_spi_gpio (struct device_node *np,const char *con_id,unsigned int idx,enum of_gpio_flags *of_flags) {char prop_name[32 ];/* 32 is max size of property name */ -const struct device_node *np = dev->of_node; -struct gpio_desc *desc;/* * Hopefully the compiler stubs the rest of the function if this
@@ -392,8 +390,7 @@ static struct gpio_desc *of_find_spi_gpio(struct device *dev,/* Will be "gpio-sck", "gpio-mosi" or "gpio-miso" */ snprintf (prop_name,sizeof (prop_name),"%s-%s" ,"gpio" , con_id); - desc =of_get_named_gpiod_flags (np, prop_name, idx, of_flags); -return desc; +return of_get_named_gpiod_flags (np, prop_name, idx, of_flags); }/*
@@ -401,13 +398,11 @@ static struct gpio_desc *of_find_spi_gpio(struct device *dev,* lines rather than "cs-gpios" like all other SPI hardware. Account for this * with a special quirk. */ -static struct gpio_desc *of_find_spi_cs_gpio (struct device *dev, +static struct gpio_desc *of_find_spi_cs_gpio (struct device_node *np,const char *con_id,unsigned int idx,enum of_gpio_flags *of_flags) { -const struct device_node *np = dev->of_node; -if (!IS_ENABLED (CONFIG_SPI_MASTER ))return ERR_PTR (-ENOENT );
@@ -425,7 +420,7 @@ static struct gpio_desc *of_find_spi_cs_gpio(struct device *dev,* uses just "gpios" so translate to that when "cs-gpios" is * requested. */ -return of_get_named_gpiod_flags (dev->of_node,"gpios" , idx, of_flags); +return of_get_named_gpiod_flags (np,"gpios" , idx, of_flags); }/*
@@ -433,7 +428,7 @@ static struct gpio_desc *of_find_spi_cs_gpio(struct device *dev,* properties should be named "foo-gpios" so we have this special kludge for * them. */ -static struct gpio_desc *of_find_regulator_gpio (struct device *dev, +static struct gpio_desc *of_find_regulator_gpio (struct device_node *np,const char *con_id,unsigned int idx,enum of_gpio_flags *of_flags)
@@ -444,8 +439,6 @@ static struct gpio_desc *of_find_regulator_gpio(struct device *dev,"wlf,ldo1ena" ,/* WM8994 */ "wlf,ldo2ena", /* WM8994 */ }; -const struct device_node *np = dev->of_node; -struct gpio_desc *desc;int i;if (!IS_ENABLED (CONFIG_REGULATOR ))
@@ -458,11 +451,10 @@ static struct gpio_desc *of_find_regulator_gpio(struct device *dev,if (i <0 )return ERR_PTR (-ENOENT ); - desc =of_get_named_gpiod_flags (np, con_id, idx, of_flags); -return desc; +return of_get_named_gpiod_flags (np, con_id, idx, of_flags); } -static struct gpio_desc *of_find_arizona_gpio (struct device *dev, +static struct gpio_desc *of_find_arizona_gpio (struct device_node *np,const char *con_id,unsigned int idx,enum of_gpio_flags *of_flags)
@@ -473,10 +465,10 @@ static struct gpio_desc *of_find_arizona_gpio(struct device *dev,if (!con_id ||strcmp (con_id,"wlf,reset" ))return ERR_PTR (-ENOENT ); -return of_get_named_gpiod_flags (dev->of_node, con_id, idx, of_flags); +return of_get_named_gpiod_flags (np, con_id, idx, of_flags); } -static struct gpio_desc *of_find_usb_gpio (struct device *dev, +static struct gpio_desc *of_find_usb_gpio (struct device_node *np,const char *con_id,unsigned int idx,enum of_gpio_flags *of_flags)
@@ -492,14 +484,27 @@ static struct gpio_desc *of_find_usb_gpio(struct device *dev,if (!con_id ||strcmp (con_id,"fcs,int_n" ))return ERR_PTR (-ENOENT ); -return of_get_named_gpiod_flags (dev->of_node, con_id, idx, of_flags); +return of_get_named_gpiod_flags (np, con_id, idx, of_flags); } +typedef struct gpio_desc *(*of_find_gpio_quirk )(struct device_node *np, +const char *con_id, +unsigned int idx, +enum of_gpio_flags *of_flags); +static const of_find_gpio_quirk of_find_gpio_quirks[] = { + of_find_spi_gpio, + of_find_spi_cs_gpio, + of_find_regulator_gpio, + of_find_arizona_gpio, + of_find_usb_gpio, +}; +struct gpio_desc *of_find_gpio (struct device *dev,const char *con_id,unsigned int idx,unsigned long *flags) {char prop_name[32 ];/* 32 is max size of property name */ enum of_gpio_flags of_flags; +const of_find_gpio_quirk *q;struct gpio_desc *desc;unsigned int i;
@@ -519,24 +524,9 @@ struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,break ; } -if (gpiod_not_found (desc)) { -/* Special handling for SPI GPIOs if used */ - desc =of_find_spi_gpio (dev, con_id, idx, &of_flags); - } - -if (gpiod_not_found (desc)) - desc =of_find_spi_cs_gpio (dev, con_id, idx, &of_flags); - -if (gpiod_not_found (desc)) { -/* Special handling for regulator GPIOs if used */ - desc =of_find_regulator_gpio (dev, con_id, idx, &of_flags); - } - -if (gpiod_not_found (desc)) - desc =of_find_arizona_gpio (dev, con_id, idx, &of_flags); - -if (gpiod_not_found (desc)) - desc =of_find_usb_gpio (dev, con_id, idx, &of_flags); +/* Properly named GPIO was not found, try workarounds */ +for (q = of_find_gpio_quirks;gpiod_not_found (desc) && *q; q++) + desc = (*q)(dev->of_node, con_id, idx, &of_flags);if (IS_ERR (desc))return desc;
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 19/47 ata: libahci_platform: Sanity check the DT child nodes number
In reply to Sasha LevinFrom: Serge Semin <[email protected]>
[ Upstream commit 3c132ea6508b34956e5ed88d04936983ec230601 ]
Having greater than AHCI_MAX_PORTS (32) ports detected isn't that critical from the further AHCI-platform initialization point of view since exceeding the ports upper limit will cause allocating more resources than will be used afterwards. But detecting too many child DT-nodes doesn't seem right since it's very unlikely to have it on an ordinary platform. In accordance with the AHCI specification there can't be more than 32 ports implemented at least due to having the CAP.NP field of 5 bits wide and the PI register of dword size. Thus if such situation is found the DTB must have been corrupted and the data read from it shouldn't be reliable. Let's consider that as an erroneous situation and halt further resources allocation.
Note it's logically more correct to have the nports set only after the initialization value is checked for being sane. So while at it let's make sure nports is assigned with a correct value.
--- drivers/ata/libahci_platform.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)
drivers/ata/libahci_platform.c +12 -2
@@ -451,14 +451,24 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev, } } - hpriv->nports = child_nodes =of_get_child_count (dev->of_node); +/* +* Too many sub-nodes most likely means having something wrong with +* the firmware. +*/ + child_nodes =of_get_child_count (dev->of_node); +if (child_nodes >AHCI_MAX_PORTS ) { + rc = -EINVAL ; + goto err_out; + }/* * If no sub-node was found, we still need to set nports to * one in order to be able to use the * ahci_platform_[en|dis]able_[phys|regulators] functions. */ -if (!child_nodes) +if (child_nodes) + hpriv->nports = child_nodes; +else hpriv->nports =1 ; hpriv->phys =devm_kcalloc (dev, hpriv->nports,sizeof (*hpriv->phys),GFP_KERNEL );
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 20/47 bcache: fix set_at_max_writeback_rate() for multiple attached devices
In reply to Sasha LevinFrom: Coly Li <[email protected]>
[ Upstream commit d2d05b88035d2d51a5bb6c5afec88a0880c73df4 ]
Inside set_at_max_writeback_rate() the calculation in following if() check is wrong,
if (atomic_inc_return(&c->idle_counter) < atomic_read(&c->attached_dev_nr) * 6)
Because each attached backing device has its own writeback thread running and increasing c->idle_counter, the counter increates much faster than expected. The correct calculation should be,
(counter / dev_nr) < dev_nr * 6
which equals to,
counter < dev_nr * dev_nr * 6
This patch fixes the above mistake with correct calculation, and helper routine idle_counter_exceeded() is added to make code be more clear.
--- drivers/md/bcache/writeback.c | 73 +++++++++++++++++++++++++---------- 1 file changed, 52 insertions(+), 21 deletions(-)
drivers/md/bcache/writeback.c +52 -21
@@ -157,6 +157,53 @@ static void __update_writeback_rate(struct cached_dev *dc) dc->writeback_rate_target = target; } +static bool idle_counter_exceeded (struct cache_set *c) +{ +int counter, dev_nr; + +/* +* If c->idle_counter is overflow (idel for really long time), +* reset as 0 and not set maximum rate this time for code +* simplicity. +*/ + counter =atomic_inc_return (&c->idle_counter); +if (counter <=0 ) { +atomic_set (&c->idle_counter,0 ); +return false; + } + + dev_nr =atomic_read (&c->attached_dev_nr); +if (dev_nr ==0 ) +return false; + +/* +* c->idle_counter is increased by writeback thread of all +* attached backing devices, in order to represent a rough +* time period, counter should be divided by dev_nr. +* Otherwise the idle time cannot be larger with more backing +* device attached. +* The following calculation equals to checking +* (counter / dev_nr) < (dev_nr * 6) +*/ +if (counter < (dev_nr * dev_nr *6 )) +return false; + +return true; +} + +/* +* Idle_counter is increased every time when update_writeback_rate() is +* called. If all backing devices attached to the same cache set have +* identical dc->writeback_rate_update_seconds values, it is about 6 +* rounds of update_writeback_rate() on each backing device before +* c->at_max_writeback_rate is set to 1, and then max wrteback rate set +* to each dc->writeback_rate.rate. +* In order to avoid extra locking cost for counting exact dirty cached +* devices number, c->attached_dev_nr is used to calculate the idle +* throushold. It might be bigger if not all cached device are in write- +* back mode, but it still works well with limited extra rounds of +* update_writeback_rate(). +*/ static bool set_at_max_writeback_rate (struct cache_set *c,struct cached_dev *dc) {
@@ -167,21 +214,8 @@ static bool set_at_max_writeback_rate(struct cache_set *c,/* Don't set max writeback rate if gc is running */ if (!c->gc_mark_valid)return false; -/* -* Idle_counter is increased everytime when update_writeback_rate() is -* called. If all backing devices attached to the same cache set have -* identical dc->writeback_rate_update_seconds values, it is about 6 -* rounds of update_writeback_rate() on each backing device before -* c->at_max_writeback_rate is set to 1, and then max wrteback rate set -* to each dc->writeback_rate.rate. -* In order to avoid extra locking cost for counting exact dirty cached -* devices number, c->attached_dev_nr is used to calculate the idle -* throushold. It might be bigger if not all cached device are in write- -* back mode, but it still works well with limited extra rounds of -* update_writeback_rate(). -*/ -if (atomic_inc_return (&c->idle_counter) < -atomic_read (&c->attached_dev_nr) *6 ) + +if (!idle_counter_exceeded (c))return false;if (atomic_read (&c->at_max_writeback_rate) !=1 )
@@ -195,13 +229,10 @@ static bool set_at_max_writeback_rate(struct cache_set *c, dc->writeback_rate_change =0 ;/* -* Check c->idle_counter and c->at_max_writeback_rate agagain in case -* new I/O arrives during before set_at_max_writeback_rate() returns. -* Then the writeback rate is set to 1, and its new value should be -* decided via __update_writeback_rate(). +* In case new I/O arrives during before +* set_at_max_writeback_rate() returns. */ -if ((atomic_read (&c->idle_counter) < -atomic_read (&c->attached_dev_nr) *6 ) || +if (!idle_counter_exceeded (c) || !atomic_read (&c->at_max_writeback_rate))return false;
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 21/47 soundwire: cadence: Don't overwrite msg->buf during write commands
In reply to Sasha LevinFrom: Richard Fitzgerald <[email protected]>
[ Upstream commit ba05b39d265bdd16913f7684600d9d41e2796745 ]
The buf passed in struct sdw_msg must only be written for a READ, in that case the RDATA part of the response is the data value of the register.
For a write command there is no RDATA, and buf should be assumed to be const and unmodifable. The original caller should not expect its data buffer to be corrupted by an sdw_nwrite().
--- drivers/soundwire/cadence_master.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/soundwire/cadence_master.c +6 -3
@@ -545,9 +545,12 @@ cdns_fill_msg_resp(struct sdw_cdns *cdns,return SDW_CMD_IGNORED ; } -/* fill response */ -for (i =0 ; i < count; i++) - msg->buf[i + offset] =FIELD_GET (CDNS_MCP_RESP_RDATA , cdns->response_buf[i]); +if (msg->flags ==SDW_MSG_FLAG_READ ) { +/* fill response */ +for (i =0 ; i < count; i++) + msg->buf[i + offset] =FIELD_GET (CDNS_MCP_RESP_RDATA , + cdns->response_buf[i]); + }return SDW_CMD_OK ; }
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 22/47 soundwire: intel: fix error handling on dai registration issues
In reply to Sasha LevinFrom: Pierre-Louis Bossart <[email protected]>
[ Upstream commit c6867cda906aadbce5e71efde9c78a26108b2bad ]
The call to intel_register_dai() may fail because of memory allocation issues or problems reported by the ASoC core. In all cases, when a error is thrown the component is not registered, it's invalid to unregister it.
--- drivers/soundwire/intel.c | 1 - 1 file changed, 1 deletion(-)
drivers/soundwire/intel.c +0 -1
@@ -1407,7 +1407,6 @@ int intel_link_startup(struct auxiliary_device *auxdev) ret =intel_register_dai (sdw);if (ret) {dev_err (dev,"DAI registration failed: %d\n" , ret); -snd_soc_unregister_component (dev); goto err_interrupt; }
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 23/47 hid: topre: Add driver fixing report descriptor
In reply to Sasha LevinFrom: Harry Stern <[email protected]>
[ Upstream commit a109d5c45b3d6728b9430716b915afbe16eef27c ]
The Topre REALFORCE R2 firmware incorrectly reports that interface descriptor number 1, input report descriptor 2's events are array events rather than variable events. That particular report descriptor is used to report keypresses when there are more than 6 keys held at a time. This bug prevents events from this interface from being registered properly, so only 6 keypresses (from a different interface) can be registered at once, rather than full n-key rollover.
This commit fixes the bug by setting the correct value in a report_fixup function.
The original bug report can be found here:
Thanks to Benjamin Tissoires for diagnosing the issue with the report descriptor.
--- drivers/hid/Kconfig | 6 +++++ drivers/hid/Makefile | 1 + drivers/hid/hid-ids.h | 3 +++ drivers/hid/hid-topre.c | 49 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 59 insertions(+) create mode 100644 drivers/hid/hid-topre.c
drivers/hid/Kconfig +6 -0
@@ -1057,6 +1057,12 @@ config HID_TOPSEED Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic CLLRCMCE remote control. +config HID_TOPRE + tristate "Topre REALFORCE keyboards" + depends on HID + help + Say Y for N-key rollover support on Topre REALFORCE R2 108 key keyboards. + config HID_THINGM tristate "ThingM blink(1) USB RGB LED" depends on HID
drivers/hid/Makefile +1 -0
@@ -117,6 +117,7 @@ obj-$(CONFIG_HID_GREENASIA) += hid-gaff.o obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o hid-thrustmaster.o obj-$(CONFIG_HID_TIVO) += hid-tivo.o obj-$(CONFIG_HID_TOPSEED) += hid-topseed.o +obj-$(CONFIG_HID_TOPRE) += hid-topre.o obj-$(CONFIG_HID_TWINHAN) += hid-twinhan.o obj-$(CONFIG_HID_U2FZERO) += hid-u2fzero.o hid-uclogic-objs := hid-uclogic-core.o \
drivers/hid/hid-ids.h +3 -0
@@ -1198,6 +1198,9 @@#define USB_DEVICE_ID_TIVO_SLIDE 0x1201#define USB_DEVICE_ID_TIVO_SLIDE_PRO 0x1203 +#define USB_VENDOR_ID_TOPRE 0x0853 +#define USB_DEVICE_ID_TOPRE_REALFORCE_R2_108 0x0148 +#define USB_VENDOR_ID_TOPSEED 0x0766#define USB_DEVICE_ID_TOPSEED_CYBERLINK 0x0204
drivers/hid/hid-topre.c new file +49 -0
49 lines not on this page · raw message
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 24/47 habanalabs: remove some f/w descriptor validations
In reply to Sasha LevinFrom: farah kassabri <[email protected]>
[ Upstream commit 6b9b9e244fdd0d6c5ee21b7b9d74282d9e43733a ]
To be forward-backward compatible with the firmware in the initial communication during preboot, we need to remove the validation of the header size. This will allow us to add more fields to the lkd_fw_comms_desc structure.
Instead of the validation of the header size, we just print warning when some mismatch in descriptor has been revealed, and we calculate the CRC base on descriptor size reported by the firmware instead of calculating it ourselves.
--- drivers/misc/habanalabs/common/firmware_if.c | 43 +++++++------------- 1 file changed, 14 insertions(+), 29 deletions(-)
drivers/misc/habanalabs/common/firmware_if.c +14 -29
@@ -1638,50 +1638,36 @@ static int hl_fw_dynamic_validate_descriptor(struct hl_device *hdev,u64 addr;int rc; -if (le32_to_cpu (fw_desc->header.magic) !=HL_COMMS_DESC_MAGIC ) { -dev_err (hdev->dev,"Invalid magic for dynamic FW descriptor (%x)\n" , +if (le32_to_cpu (fw_desc->header.magic) !=HL_COMMS_DESC_MAGIC ) +dev_warn (hdev->dev,"Invalid magic for dynamic FW descriptor (%x)\n" , fw_desc->header.magic); -return -EIO ; - } -if (fw_desc->header.version !=HL_COMMS_DESC_VER ) { -dev_err (hdev->dev,"Invalid version for dynamic FW descriptor (%x)\n" , +if (fw_desc->header.version !=HL_COMMS_DESC_VER ) +dev_warn (hdev->dev,"Invalid version for dynamic FW descriptor (%x)\n" , fw_desc->header.version); -return -EIO ; - }/* -* calc CRC32 of data without header. +* Calc CRC32 of data without header. use the size of the descriptor +* reported by firmware, without calculating it ourself, to allow adding +* more fields to the lkd_fw_comms_desc structure. * note that no alignment/stride address issues here as all structures -* are 64 bit padded +* are 64 bit padded. */ - data_size =sizeof (struct lkd_fw_comms_desc ) - -sizeof (struct comms_desc_header ); data_ptr = (u8 *)fw_desc +sizeof (struct comms_desc_header ); - -if (le16_to_cpu (fw_desc->header.size) != data_size) { -dev_err (hdev->dev, -"Invalid descriptor size 0x%x, expected size 0x%zx\n" , -le16_to_cpu (fw_desc->header.size), data_size); -return -EIO ; - } + data_size =le16_to_cpu (fw_desc->header.size); data_crc32 =hl_fw_compat_crc32 (data_ptr, data_size); -if (data_crc32 !=le32_to_cpu (fw_desc->header.crc32)) { -dev_err (hdev->dev, -"CRC32 mismatch for dynamic FW descriptor (%x:%x)\n" , - data_crc32, fw_desc->header.crc32); +dev_err (hdev->dev,"CRC32 mismatch for dynamic FW descriptor (%x:%x)\n" , + data_crc32, fw_desc->header.crc32);return -EIO ; }/* find memory region to which to copy the image */ addr =le64_to_cpu (fw_desc->img_addr); region_id =hl_get_pci_memory_region (hdev, addr); -if ((region_id !=PCI_REGION_SRAM ) && - ((region_id !=PCI_REGION_DRAM ))) { -dev_err (hdev->dev, -"Invalid region to copy FW image address=%llx\n" , addr); +if ((region_id !=PCI_REGION_SRAM ) && ((region_id !=PCI_REGION_DRAM ))) { +dev_err (hdev->dev,"Invalid region to copy FW image address=%llx\n" , addr);return -EIO ; }
@@ -1698,8 +1684,7 @@ static int hl_fw_dynamic_validate_descriptor(struct hl_device *hdev, fw_loader->dynamic_loader.fw_image_size, region);if (rc) { -dev_err (hdev->dev, -"invalid mem transfer request for FW image\n" ); +dev_err (hdev->dev,"invalid mem transfer request for FW image\n" );return rc; }
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 25/47 HID: roccat: Fix use-after-free in roccat_read()
In reply to Sasha LevinFrom: Hyunwoo Kim <[email protected]>
[ Upstream commit cacdb14b1c8d3804a3a7d31773bc7569837b71a4 ]
roccat_report_event() is responsible for registering roccat-related reports in struct roccat_device.
int roccat_report_event(int minor, u8 const *data)
{
struct roccat_device *device;
struct roccat_reader *reader;
struct roccat_report *report;
uint8_t *new_value;
device = devices[minor];
new_value = kmemdup(data, device->report_size, GFP_ATOMIC);
if (!new_value)
return -ENOMEM;
report = &device->cbuf[device->cbuf_end];
/* passing NULL is safe */
kfree(report->value);
...The registered report is stored in the struct roccat_device member "struct roccat_report cbuf[ROCCAT_CBUF_SIZE];".
If more reports are received than the "ROCCAT_CBUF_SIZE" value, kfree() the saved report from cbuf[0] and allocates a new reprot. Since there is no lock when this kfree() is performed, kfree() can be performed even while reading the saved report.
static ssize_t roccat_read(struct file *file, char __user *buffer,
size_t count, loff_t *ppos)
{
struct roccat_reader *reader = file->private_data;
struct roccat_device *device = reader->device;
struct roccat_report *report;
ssize_t retval = 0, len;
DECLARE_WAITQUEUE(wait, current);
mutex_lock(&device->cbuf_lock);
...
report = &device->cbuf[reader->cbuf_start];
/*
* If report is larger than requested amount of data, rest of report
* is lost!
*/
len = device->report_size > count ? count : device->report_size;
if (copy_to_user(buffer, report->value, len)) {
retval = -EFAULT;
goto exit_unlock;
}
...The roccat_read() function receives the device->cbuf report and delivers it to the user through copy_to_user().
If the N+ROCCAT_CBUF_SIZE th report is received while copying of the Nth report->value is in progress, the pointer that copy_to_user() is working on is kfree()ed and UAF read may occur. (race condition)
Since the device node of this driver does not set separate permissions, this is not a security vulnerability, but because it is used for requesting screen display of profile or dpi settings,
a user using the roccat device can apply udev to this device node or There is a possibility to use it by giving.
--- drivers/hid/hid-roccat.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/hid/hid-roccat.c +4 -0
@@ -257,6 +257,8 @@ int roccat_report_event(int minor, u8 const *data)if (!new_value)return -ENOMEM ; +mutex_lock (&device->cbuf_lock); + report = &device->cbuf[device->cbuf_end];/* passing NULL is safe */
@@ -276,6 +278,8 @@ int roccat_report_event(int minor, u8 const *data) reader->cbuf_start = (reader->cbuf_start +1 ) %ROCCAT_CBUF_SIZE ; } +mutex_unlock (&device->cbuf_lock); +wake_up_interruptible (&device->wait);return 0 ; }
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 26/47 HSI: ssi_protocol: fix potential resource leak in ssip_pn_open()
In reply to Sasha LevinFrom: Jianglei Nie <[email protected]>
[ Upstream commit b28dbcb379e6a7f80262c2732a57681b1ee548ca ]
ssip_pn_open() claims the HSI client's port with hsi_claim_port(). When hsi_register_port_event() gets some error and returns a negetive value, the HSI client's port should be released with hsi_release_port().
Fix it by calling hsi_release_port() when hsi_register_port_event() fails.
--- drivers/hsi/clients/ssi_protocol.c | 1 + 1 file changed, 1 insertion(+)
drivers/hsi/clients/ssi_protocol.c +1 -0
@@ -931,6 +931,7 @@ static int ssip_pn_open(struct net_device *dev)if (err <0 ) {dev_err (&cl->device,"Register HSI port event failed (%d)\n" , err); +hsi_release_port (cl);return err; }dev_dbg (&cl->device,"Configuring SSI port\n" );
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 27/47 eventfd: guard wake_up in eventfd fs calls as well
In reply to Sasha LevinFrom: Dylan Yudaken <[email protected]>
[ Upstream commit 9f0deaa12d832f488500a5afe9b912e9b3cfc432 ]
Guard wakeups that the user can trigger, and that may end up triggering a call back into eventfd_signal. This is in addition to the current approach that only guards in eventfd_signal.
Rename in_eventfd_signal -> in_eventfd at the same time to reflect this.
Without this there would be a deadlock in the following code using libaio:
int main()
{
struct io_context *ctx = NULL;
struct iocb iocb;
struct iocb *iocbs[] = { &iocb };
int evfd;
uint64_t val = 1;
evfd = eventfd(0, EFD_CLOEXEC);
assert(!io_setup(2, &ctx));
io_prep_poll(&iocb, evfd, POLLIN);
io_set_eventfd(&iocb, evfd);
assert(1 == io_submit(ctx, 1, iocbs));
write(evfd, &val, 8);
}--- fs/eventfd.c | 10 +++++++--- include/linux/eventfd.h | 2 +- include/linux/sched.h | 2 +- 3 files changed, 9 insertions(+), 5 deletions(-)
fs/eventfd.c +7 -3
@@ -69,17 +69,17 @@ __u64 eventfd_signal(struct eventfd_ctx *ctx, __u64 n)* it returns false, the eventfd_signal() call should be deferred to a * safe context. */ -if (WARN_ON_ONCE (current->in_eventfd_signal)) +if (WARN_ON_ONCE (current->in_eventfd))return 0 ;spin_lock_irqsave (&ctx->wqh.lock, flags); - current->in_eventfd_signal =1 ; + current->in_eventfd =1 ;if (ULLONG_MAX - ctx->count < n) n =ULLONG_MAX - ctx->count; ctx->count += n;if (waitqueue_active (&ctx->wqh))wake_up_locked_poll (&ctx->wqh,EPOLLIN ); - current->in_eventfd_signal =0 ; + current->in_eventfd =0 ;spin_unlock_irqrestore (&ctx->wqh.lock, flags);return n;
@@ -253,8 +253,10 @@ static ssize_t eventfd_read(struct kiocb *iocb, struct iov_iter *to)__set_current_state (TASK_RUNNING ); }eventfd_ctx_do_read (ctx, &ucnt); + current->in_eventfd =1 ;if (waitqueue_active (&ctx->wqh))wake_up_locked_poll (&ctx->wqh,EPOLLOUT ); + current->in_eventfd =0 ;spin_unlock_irq (&ctx->wqh.lock);if (unlikely (copy_to_iter (&ucnt,sizeof (ucnt), to) !=sizeof (ucnt)))return -EFAULT ;
@@ -301,8 +303,10 @@ static ssize_t eventfd_write(struct file *file, const char __user *buf, size_t c }if (likely (res >0 )) { ctx->count += ucnt; + current->in_eventfd =1 ;if (waitqueue_active (&ctx->wqh))wake_up_locked_poll (&ctx->wqh,EPOLLIN ); + current->in_eventfd =0 ; }spin_unlock_irq (&ctx->wqh.lock);
include/linux/eventfd.h +1 -1
@@ -46,7 +46,7 @@ void eventfd_ctx_do_read(struct eventfd_ctx *ctx, __u64 *cnt);static inline bool eventfd_signal_allowed (void ) { -return !current->in_eventfd_signal; +return !current->in_eventfd; }#else /* CONFIG_EVENTFD */
include/linux/sched.h +1 -1
@@ -933,7 +933,7 @@ struct task_struct {#endif #ifdef CONFIG_EVENTFD /* Recursion prevention for eventfd_signal() */ - unsigned in_eventfd_signal:1; + unsigned in_eventfd:1;#endif unsigned long atomic_flags;/* Flags requiring atomic access. */
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 28/47 md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d
In reply to Sasha LevinFrom: Logan Gunthorpe <[email protected]>
[ Upstream commit 5e2cf333b7bd5d3e62595a44d598a254c697cd74 ]
A complicated deadlock exists when using the journal and an elevated group_thrtead_cnt. It was found with loop devices, but its not clear whether it can be seen with real disks. The deadlock can occur simply by writing data with an fio script.
When the deadlock occurs, multiple threads will hang in different ways:
1) The group threads will hang in the blk-wbt code with bios waiting to
be submitted to the block layer:
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
__submit_bio+0xe6/0x100
submit_bio_noacct_nocheck+0x42e/0x470
submit_bio_noacct+0x4c2/0xbb0
ops_run_io+0x46b/0x1a30
handle_stripe+0xcd3/0x36b0
handle_active_stripes.constprop.0+0x6f6/0xa60
raid5_do_work+0x177/0x330
Or:
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
__submit_bio+0xe6/0x100
submit_bio_noacct_nocheck+0x42e/0x470
submit_bio_noacct+0x4c2/0xbb0
flush_deferred_bios+0x136/0x170
raid5_do_work+0x262/0x330 2) The r5l_reclaim thread will hang in the same way, submitting a
bio to the block layer:
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
__submit_bio+0xe6/0x100
submit_bio_noacct_nocheck+0x42e/0x470
submit_bio_noacct+0x4c2/0xbb0
submit_bio+0x3f/0xf0
md_super_write+0x12f/0x1b0
md_update_sb.part.0+0x7c6/0xff0
md_update_sb+0x30/0x60
r5l_do_reclaim+0x4f9/0x5e0
r5l_reclaim_thread+0x69/0x30b
However, before hanging, the MD_SB_CHANGE_PENDING flag will be
set for sb_flags in r5l_write_super_and_discard_space(). This
flag will never be cleared because the submit_bio() call never
returns. 3) Due to the MD_SB_CHANGE_PENDING flag being set, handle_stripe() will do no processing on any pending stripes and re-set STRIPE_HANDLE. This will cause the raid5d thread to enter an infinite loop, constantly trying to handle the same stripes stuck in the queue.
The raid5d thread has a blk_plug that holds a number of bios that are also stuck waiting seeing the thread is in a loop that never schedules. These bios have been accounted for by blk-wbt thus preventing the other threads above from continuing when they try to submit bios. --Deadlock.
To fix this, add the same wait_event() that is used in raid5_do_work() to raid5d() such that if MD_SB_CHANGE_PENDING is set, the thread will schedule and wait until the flag is cleared. The schedule action will flush the plug which will allow the r5l_reclaim thread to continue, thus preventing the deadlock.
However, md_check_recovery() calls can also clear MD_SB_CHANGE_PENDING from the same thread and can thus deadlock if the thread is put to sleep. So avoid waiting if md_check_recovery() is being called in the loop.
It's not clear when the deadlock was introduced, but the similar wait_event() call in raid5_do_work() was added in 2017 by this commit:
16d997b78b15 ("md/raid5: simplfy delaying of writes while metadata
is updated.")
--- drivers/md/raid5.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
drivers/md/raid5.c +12 -0
@@ -36,6 +36,7 @@*/ #include <linux/blkdev.h> +#include <linux/delay.h> #include <linux/kthread.h> #include <linux/raid/pq.h> #include <linux/async_tx.h>
@@ -6522,7 +6523,18 @@ static void raid5d(struct md_thread *thread)spin_unlock_irq (&conf->device_lock);md_check_recovery (mddev);spin_lock_irq (&conf->device_lock); + +/* +* Waiting on MD_SB_CHANGE_PENDING below may deadlock +* seeing md_check_recovery() is needed to clear +* the flag when using mdmon. +*/ +continue ; } + +wait_event_lock_irq (mddev->sb_wait, + !test_bit (MD_SB_CHANGE_PENDING , &mddev->sb_flags), + conf->device_lock); }pr_debug ("%d stripes handled\n" , handled);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 29/47 usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()
In reply to Sasha LevinFrom: Jianglei Nie <[email protected]>
[ Upstream commit 7e271f42a5cc3768cd2622b929ba66859ae21f97 ]
xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak.
We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak.
--- drivers/usb/host/xhci-mem.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/usb/host/xhci-mem.c +6 -1
@@ -642,7 +642,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, num_stream_ctxs, &stream_info->ctx_array_dma, mem_flags);if (!stream_info->stream_ctx_array) - goto cleanup_ctx; + goto cleanup_ring_array;memset (stream_info->stream_ctx_array,0 ,sizeof (struct xhci_stream_ctx )*num_stream_ctxs);
@@ -703,6 +703,11 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, }xhci_free_command (xhci, stream_info->free_streams_command); cleanup_ctx: +xhci_free_stream_ctx (xhci, + stream_info->num_stream_ctxs, + stream_info->stream_ctx_array, + stream_info->ctx_array_dma); +cleanup_ring_array:kfree (stream_info->stream_rings); cleanup_info:kfree (stream_info);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 30/47 usb: musb: Fix musb_gadget.c rxstate overflow bug
In reply to Sasha LevinFrom: Robin Guo <[email protected]>
[ Upstream commit eea4c860c3b366369eff0489d94ee4f0571d467d ]
The usb function device call musb_gadget_queue() adds the passed request to musb_ep::req_list,If the (request->length > musb_ep->packet_sz) and (is_buffer_mapped(req) return false),the rxstate() will copy all data in fifo to request->buf which may cause request->buf out of bounds.
Fix it by add the length check :
fifocnt = min_t(unsigned, request->length - request->actual, fifocnt);
--- drivers/usb/musb/musb_gadget.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/usb/musb/musb_gadget.c +3 -0
@@ -760,6 +760,9 @@ static void rxstate(struct musb *musb, struct musb_request *req)musb_writew (epio,MUSB_RXCSR , csr); buffer_aint_mapped: + fifo_count = min_t(unsigned int, + request->length - request->actual, + (unsigned int )fifo_count);musb_read_fifo (musb_ep->hw_ep, fifo_count, (u8 *) (request->buf + request->actual)); request->actual += fifo_count;
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 31/47 arm64: dts: imx8mp: Add snps,gfladj-refclk-lpm-sel quirk to USB nodes
In reply to Sasha LevinFrom: Alexander Stein <[email protected]>
[ Upstream commit 5c3d5ecf48ab06c709c012bf1e8f0c91e1fcd7ad ]
With this set the SOF/ITP counter is based on ref_clk when 2.0 ports are suspended.
snps,dis-u2-freeclk-exists-quirk can be removed as snps,gfladj-refclk-lpm-sel also clears the free running clock configuration bit.
--- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/freescale/imx8mp.dtsi +2 -2
@@ -912,7 +912,7 @@ usb_dwc3_0: usb@38100000 { interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb3_phy0>, <&usb3_phy0>; phy-names = "usb2-phy", "usb3-phy"; - snps,dis-u2-freeclk-exists-quirk; + snps,gfladj-refclk-lpm-sel-quirk; }; };
@@ -953,7 +953,7 @@ usb_dwc3_1: usb@38200000 { interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb3_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-phy"; - snps,dis-u2-freeclk-exists-quirk; + snps,gfladj-refclk-lpm-sel-quirk; }; };
Signature · 1 line
2.35.1
Re: [PATCH AUTOSEL 5.15 31/47] arm64: dts: imx8mp: Add snps, gfladj-refclk-lpm-sel quirk to USB nodes
Am Donnerstag, 13. Oktober 2022, 02:21:06 CEST schrieb Sasha Levin:
Quoted 25 lines
From: Alexander Stein <[email protected]>
[ Upstream commit
5c3d5ecf48ab06c709c012bf1e8f0c91e1fcd7ad]With this set the SOF/ITP counter is based on
ref_clkwhen 2.0 ports are suspended.
snps,dis-u2-freeclk-exists-quirk can be removed as snps,gfladj-refclk-lpm-sel also clears the free running clock configuration bit.Signed-off-by Alexander Stein <[email protected]>Link:
https://lore.kernel.org/r/[email protected]
up.com Signed-off-by: Greg Kroah-Hartman <[email protected]>Signed-off-by Sasha Levin <[email protected]>--- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)(quoted diff) +0
-0
b/arch/arm64/boot/dts/freescale/imx8mp.dtsiindex9b07b26230a1..664177ed38d3100644
arch/arm64/boot/dts/freescale/imx8mp.dtsi usb_dwc3_0: usb@38100000 { · line 912
Quoted 1 line
arch/arm64/boot/dts/freescale/imx8mp.dtsi +0
-0@@ -912,7 +912,7 @@ usb_dwc3_0: usb@38100000 { interrupts = <GIC_SPI 40
IRQ_TYPE_LEVEL_HIGH>;
arch/arm64/boot/dts/freescale/imx8mp.dtsi usb_dwc3_0: usb@38100000 { · line 914
Quoted 2 lines
arch/arm64/boot/dts/freescale/imx8mp.dtsi +0
-0phys = <&usb3_phy0>, <&usb3_phy0>; phy-names = "usb2-phy", "usb3-
phy";
arch/arm64/boot/dts/freescale/imx8mp.dtsi usb_dwc3_1: usb@38200000 { · line 953
Quoted 7 lines
arch/arm64/boot/dts/freescale/imx8mp.dtsi +1
-1- snps,dis-u2-freeclk-exists-quirk; + snps,gfladj-refclk-lpm-sel-quirk; }; };@@ -953,7 +953,7 @@ usb_dwc3_1: usb@38200000 { interrupts = <GIC_SPI 41
IRQ_TYPE_LEVEL_HIGH>;
arch/arm64/boot/dts/freescale/imx8mp.dtsi usb_dwc3_1: usb@38200000 { · line 955
Quoted 2 lines
arch/arm64/boot/dts/freescale/imx8mp.dtsi +0
-0phys = <&usb3_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-
phy";
arch/arm64/boot/dts/freescale/imx8mp.dtsi usb_dwc3_0: usb@38100000 { · line 918
Quoted 4 lines
arch/arm64/boot/dts/freescale/imx8mp.dtsi +1
-1- snps,dis-u2-freeclk-exists-quirk; + snps,gfladj-refclk-lpm-sel-quirk; }; };
Mh, does it make sense to pick this one without commit a6fc2f1b0927 ("usb:
dwc3: core: add gfladj_refclk_lpm_sel quirk")? snps,gfladj-refclk-lpm-sel-quirk is unknown/unused after this patch, but snps,dis-u2-freeclk-exists-quirk is not applied any more.
If a6fc2f1b0927 is not applicable, I would drop this one instead.
Best regards,
Alexander
Sasha Levin
maintainerPATCH 32/47 usb: dwc3: core: Enable GUCTL1 bit 10 for fixing termination error after resume bug
In reply to Sasha LevinFrom: Piyush Mehta <[email protected]>
[ Upstream commit 63d7f9810a38102cdb8cad214fac98682081e1a7 ]
When configured in HOST mode, after issuing U3/L2 exit controller fails to send proper CRC checksum in CRC5 field. Because of this behavior Transaction Error is generated, resulting in reset and re-enumeration of usb device attached. Enabling chicken bit 10 of GUCTL1 will correct this problem.
When this bit is set to '1', the UTMI/ULPI opmode will be changed to "normal" along with HS terminations, term, and xcvr signals after EOR. This option is to support certain legacy UTMI/ULPI PHYs.
Added "snps,resume-hs-terminations" quirk to resolved the above issue.
--- drivers/usb/dwc3/core.c | 17 +++++++++++++++++ drivers/usb/dwc3/core.h | 4 ++++ 2 files changed, 21 insertions(+)
drivers/usb/dwc3/core.c +17 -0
@@ -1041,6 +1041,21 @@ static int dwc3_core_init(struct dwc3 *dwc)dwc3_writel (dwc->regs,DWC3_GUCTL2 , reg); } +/* +* When configured in HOST mode, after issuing U3/L2 exit controller +* fails to send proper CRC checksum in CRC5 feild. Because of this +* behaviour Transaction Error is generated, resulting in reset and +* re-enumeration of usb device attached. All the termsel, xcvrsel, +* opmode becomes 0 during end of resume. Enabling bit 10 of GUCTL1 +* will correct this problem. This option is to support certain +* legacy ULPI PHYs. +*/ +if (dwc->resume_hs_terminations) { + reg =dwc3_readl (dwc->regs,DWC3_GUCTL1 ); + reg |=DWC3_GUCTL1_RESUME_OPMODE_HS_HOST ; +dwc3_writel (dwc->regs,DWC3_GUCTL1 , reg); + } + if (!DWC3_VER_IS_PRIOR(DWC3, 250A)) { reg =dwc3_readl (dwc->regs,DWC3_GUCTL1 );
@@ -1383,6 +1398,8 @@ static void dwc3_get_properties(struct dwc3 *dwc) "snps,dis-del-phy-power-chg-quirk"); dwc->dis_tx_ipgap_linecheck_quirk =device_property_read_bool (dev,"snps,dis-tx-ipgap-linecheck-quirk" ); + dwc->resume_hs_terminations =device_property_read_bool (dev, +"snps,resume-hs-terminations" ); dwc->parkmode_disable_ss_quirk =device_property_read_bool (dev,"snps,parkmode-disable-ss-quirk" );
drivers/usb/dwc3/core.h +4 -0
@@ -260,6 +260,7 @@#define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28)#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24)#define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17) +#define DWC3_GUCTL1_RESUME_OPMODE_HS_HOST BIT(10)/* Global Status Register */ #define DWC3_GSTS_OTG_IP BIT(10)
@@ -1072,6 +1073,8 @@ struct dwc3_scratchpad_array {* change quirk. * @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate * check during HS transmit. +* @resume-hs-terminations: Set if we enable quirk for fixing improper crc +* generation after resume from suspend. * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed * instances in park mode. * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
@@ -1284,6 +1287,7 @@ struct dwc3 { unsigned dis_u2_freeclk_exists_quirk:1; unsigned dis_del_phy_power_chg_quirk:1; unsigned dis_tx_ipgap_linecheck_quirk:1; + unsigned resume_hs_terminations:1; unsigned parkmode_disable_ss_quirk:1; unsigned tx_de_emphasis_quirk:1;
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 33/47 Revert "usb: storage: Add quirk for Samsung Fit flash"
In reply to Sasha LevinFrom: sunghwan jung <[email protected]>
[ Upstream commit ad5dbfc123e6ffbbde194e2a4603323e09f741ee ]
This reverts commit 86d92f5465958752481269348d474414dccb1552, which fix the timeout issue for "Samsung Fit Flash".
But the commit affects not only "Samsung Fit Flash" but also other usb storages that use the same controller and causes severe performance regression.
# hdparm -t /dev/sda (without the quirk) Timing buffered disk reads: 622 MB in 3.01 seconds = 206.66 MB/sec
# hdparm -t /dev/sda (with the quirk) Timing buffered disk reads: 220 MB in 3.00 seconds = 73.32 MB/sec
The commit author mentioned that "Issue was reproduced after device has bad block", so this quirk should be applied when we have the timeout issue with a device that has bad blocks.
We revert the commit so that we apply this quirk by adding kernel paramters using a bootloader or other ways when we really need it, without the performance regression with devices that don't have the issue.
--- drivers/usb/storage/unusual_devs.h | 6 ------ 1 file changed, 6 deletions(-)
drivers/usb/storage/unusual_devs.h +0 -6
@@ -1275,12 +1275,6 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999, USB_SC_RBC, USB_PR_BULK, NULL, 0 ), -UNUSUAL_DEV (0x090c ,0x1000 ,0x1100 ,0x1100 , -"Samsung" , -"Flash Drive FIT" , -USB_SC_DEVICE ,USB_PR_DEVICE ,NULL , -US_FL_MAX_SECTORS_64 ), -/* aeb */ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, "Feiya",
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 34/47 tty: n_gsm: replace use of gsm_read_ea() with gsm_read_ea_val()
In reply to Sasha LevinFrom: Daniel Starke <[email protected]>
[ Upstream commit 669609cea1d294f43efdd8d57ab65927df90e6df ]
Replace the use of gsm_read_ea() with gsm_read_ea_val() where applicable to improve code readability and avoid errors like in the past. See first link below for reference.
--- drivers/tty/n_gsm.c | 95 ++++++++++++++++++++++----------------------- 1 file changed, 47 insertions(+), 48 deletions(-)
drivers/tty/n_gsm.c +47 -48
@@ -1297,18 +1297,12 @@ static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen)unsigned int modem =0 ;struct gsm_dlci *dlci;int len = clen; -int slen; +int cl = clen;const u8 *dp = data;struct tty_struct *tty; -while (gsm_read_ea (&addr, *dp++) ==0 ) { - len--; -if (len ==0 ) -return ; - } -/* Must be at least one byte following the EA */ - len--; -if (len <=0 ) + len =gsm_read_ea_val (&addr, data, cl); +if (len <1 )return ; addr >>=1 ;
@@ -1317,15 +1311,20 @@ static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen)return ; dlci = gsm->dlci[addr]; - slen = len; -while (gsm_read_ea (&modem, *dp++) ==0 ) { - len--; -if (len ==0 ) -return ; - } - len--; +/* Must be at least one byte following the EA */ +if ((cl - len) <1 ) +return ; + + dp += len; + cl -= len; + +/* get the modem status */ + len =gsm_read_ea_val (&modem, dp, cl); +if (len <1 ) +return ; + tty =tty_port_tty_get (&dlci->port); -gsm_process_modem (tty, dlci, modem, slen - len); +gsm_process_modem (tty, dlci, modem, cl);if (tty) {tty_wakeup (tty);tty_kref_put (tty);
@@ -1819,11 +1818,10 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, const u8 *data, int clen)struct tty_port *port = &dlci->port;struct tty_struct *tty;unsigned int modem =0 ; -int len = clen; -int slen =0 ; +int len;if (debug &16 ) -pr_debug ("%d bytes for tty\n" , len); +pr_debug ("%d bytes for tty\n" , clen);switch (dlci->adaption) {/* Unsupported types */ case 4 :/* Packetised interruptible data */
@@ -1831,24 +1829,22 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, const u8 *data, int clen)case 3 :/* Packetised uininterruptible voice/data */ break ;case 2 :/* Asynchronous serial with line state in each frame */ -while (gsm_read_ea (&modem, *data++) ==0 ) { - len--; - slen++; -if (len ==0 ) -return ; - } - len--; - slen++; + len =gsm_read_ea_val (&modem, data, clen); +if (len <1 ) +return ; tty =tty_port_tty_get (port);if (tty) { -gsm_process_modem (tty, dlci, modem, slen); +gsm_process_modem (tty, dlci, modem, len);tty_wakeup (tty);tty_kref_put (tty); } +/* Skip processed modem data */ + data += len; + clen -= len; fallthrough;case 1 :/* Line state will go via DLCI 0 controls only */ default : -tty_insert_flip_string (port, data, len); +tty_insert_flip_string (port, data, clen);tty_flip_buffer_push (port); } }
@@ -1869,24 +1865,27 @@ static void gsm_dlci_command(struct gsm_dlci *dlci, const u8 *data, int len) {/* See what command is involved */ unsigned int command =0 ; -while (len-- >0 ) { -if (gsm_read_ea (&command, *data++) ==1 ) { -int clen = *data++; - len--; -/* FIXME: this is properly an EA */ - clen >>=1 ; -/* Malformed command ? */ -if (clen > len) -return ; -if (command &1 ) -gsm_control_message (dlci->gsm, command, - data, clen); -else -gsm_control_response (dlci->gsm, command, - data, clen); -return ; - } - } +unsigned int clen =0 ; +unsigned int dlen; + +/* read the command */ + dlen =gsm_read_ea_val (&command, data, len); + len -= dlen; + data += dlen; + +/* read any control data */ + dlen =gsm_read_ea_val (&clen, data, len); + len -= dlen; + data += dlen; + +/* Malformed command? */ +if (clen > len) +return ; + +if (command &1 ) +gsm_control_message (dlci->gsm, command, data, clen); +else +gsm_control_response (dlci->gsm, command, data, clen); }/**
Signature · 1 line
2.35.1
Re: [PATCH AUTOSEL 5.15 34/47] tty: n_gsm: replace use of gsm_read_ea() with gsm_read_ea_val()
Quoted 7 lines · Sasha Levin
From: Daniel Starke <[email protected]>
[ Upstream commit
669609cea1d294f43efdd8d57ab65927df90e6df]Replace the use of
gsm_read_ea()withgsm_read_ea_val()where applicable to improve code readability and avoid errors like in the past. See first link below for reference.
I don't think this warrants for stable. It's only a cleanup, not a fix. And it's quite intrusive.
Quoted 159 lines
Reported-by kernel test robot <[email protected]>Signed-off-by Daniel Starke <[email protected]>Signed-off-by Greg Kroah-Hartman <[email protected]>Signed-off-by Sasha Levin <[email protected]>--- drivers/tty/n_gsm.c | 95 ++++++++++++++++++++++----------------------- 1 file changed, 47 insertions(+), 48 deletions(-)drivers/tty/n_gsm.c +47
-48@@ -1297,18 +1297,12 @@ static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen)unsigned int modem =0 ;struct gsm_dlci *dlci;int len = clen; -int slen; +int cl = clen;const u8 *dp = data;struct tty_struct *tty; -while (gsm_read_ea (&addr, *dp++) ==0 ) { - len--; -if (len ==0 ) -return ; - } -/* Must be at least one byte following the EA */ - len--; -if (len <=0 ) + len =gsm_read_ea_val (&addr, data, cl); +if (len <1 )return ; addr >>=1 ;@@ -1317,15 +1311,20 @@ static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen)return ; dlci = gsm->dlci[addr]; - slen = len; -while (gsm_read_ea (&modem, *dp++) ==0 ) { - len--; -if (len ==0 ) -return ; - } - len--; +/* Must be at least one byte following the EA */ +if ((cl - len) <1 ) +return ; + + dp += len; + cl -= len; + +/* get the modem status */ + len =gsm_read_ea_val (&modem, dp, cl); +if (len <1 ) +return ; + tty =tty_port_tty_get (&dlci->port); -gsm_process_modem (tty, dlci, modem, slen - len); +gsm_process_modem (tty, dlci, modem, cl);if (tty) {tty_wakeup (tty);tty_kref_put (tty);@@ -1819,11 +1818,10 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, const u8 *data, int clen)struct tty_port *port = &dlci->port;struct tty_struct *tty;unsigned int modem =0 ; -int len = clen; -int slen =0 ; +int len;if (debug &16 ) -pr_debug ("%d bytes for tty\n" , len); +pr_debug ("%d bytes for tty\n" , clen);switch (dlci->adaption) {/* Unsupported types */ case 4 :/* Packetised interruptible data */ @@ -1831,24 +1829,22 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, const u8 *data, int clen)case 3 :/* Packetised uininterruptible voice/data */ break ;case 2 :/* Asynchronous serial with line state in each frame */ -while (gsm_read_ea (&modem, *data++) ==0 ) { - len--; - slen++; -if (len ==0 ) -return ; - } - len--; - slen++; + len =gsm_read_ea_val (&modem, data, clen); +if (len <1 ) +return ; tty =tty_port_tty_get (port);if (tty) { -gsm_process_modem (tty, dlci, modem, slen); +gsm_process_modem (tty, dlci, modem, len);tty_wakeup (tty);tty_kref_put (tty); } +/* Skip processed modem data */ + data += len; + clen -= len; fallthrough;case 1 :/* Line state will go via DLCI 0 controls only */ default : -tty_insert_flip_string (port, data, len); +tty_insert_flip_string (port, data, clen);tty_flip_buffer_push (port); } }@@ -1869,24 +1865,27 @@ static void gsm_dlci_command(struct gsm_dlci *dlci, const u8 *data, int len) {/* See what command is involved */ unsigned int command =0 ; -while (len-- >0 ) { -if (gsm_read_ea (&command, *data++) ==1 ) { -int clen = *data++; - len--; -/* FIXME: this is properly an EA */ - clen >>=1 ; -/* Malformed command ? */ -if (clen > len) -return ; -if (command &1 ) -gsm_control_message (dlci->gsm, command, - data, clen); -else -gsm_control_response (dlci->gsm, command, - data, clen); -return ; - } - } +unsigned int clen =0 ; +unsigned int dlen; + +/* read the command */ + dlen =gsm_read_ea_val (&command, data, len); + len -= dlen; + data += dlen; + +/* read any control data */ + dlen =gsm_read_ea_val (&clen, data, len); + len -= dlen; + data += dlen; + +/* Malformed command? */ +if (clen > len) +return ; + +if (command &1 ) +gsm_control_message (dlci->gsm, command, data, clen); +else +gsm_control_response (dlci->gsm, command, data, clen); }/**
Signature · 2 lines
js suse labs
Sasha Levin
maintainerRe: [PATCH AUTOSEL 5.15 34/47] tty: n_gsm: replace use of gsm_read_ea() with gsm_read_ea_val()
Quoted 10 lines · Jiri Slaby
Quoted 7 lines · Sasha Levin
From: Daniel Starke <[email protected]>
[ Upstream commit
669609cea1d294f43efdd8d57ab65927df90e6df]Replace the use of
gsm_read_ea()withgsm_read_ea_val()where applicable to improve code readability and avoid errors like in the past. See first link below for reference.I don't think this warrants for stable. It's only a cleanup, not a fix. And it's quite intrusive.
I'll drop it, thanks!
Signature · 2 lines
Thanks, Sasha
Sasha Levin
maintainerPATCH 35/47 staging: rtl8723bs: fix potential memory leak in rtw_init_drv_sw()
In reply to Sasha LevinFrom: Xiaoke Wang <[email protected]>
[ Upstream commit 5a5aa9cce621e2c0e25a1e5d72d6be1749167cc0 ]
In rtw_init_drv_sw(), there are various init functions are called to populate the padapter structure and some checks for their return value. However, except for the first one error path, the other five error paths do not properly release the previous allocated resources, which leads to various memory leaks.
This patch fixes them and keeps the success and error separate. Note that these changes keep the form of rtw_init_drv_sw() in "drivers/staging/r8188eu/os_dep/os_intfs.c". As there is no proper device to test with, no runtime testing was performed.
--- drivers/staging/rtl8723bs/os_dep/os_intfs.c | 60 +++++++++++---------- 1 file changed, 31 insertions(+), 29 deletions(-)
drivers/staging/rtl8723bs/os_dep/os_intfs.c +31 -29
@@ -664,51 +664,36 @@ void rtw_reset_drv_sw(struct adapter *padapter)u8 rtw_init_drv_sw (struct adapter *padapter) { -u8 ret8 = _SUCCESS; -rtw_init_default_value (padapter);rtw_init_hal_com_default_value (padapter); -if (rtw_init_cmd_priv (&padapter->cmdpriv)) { - ret8 = _FAIL; - goto exit; - } +if (rtw_init_cmd_priv (&padapter->cmdpriv)) +return _FAIL; padapter->cmdpriv.padapter = padapter; -if (rtw_init_evt_priv (&padapter->evtpriv)) { - ret8 = _FAIL; - goto exit; - } +if (rtw_init_evt_priv (&padapter->evtpriv)) + goto free_cmd_priv; - -if (rtw_init_mlme_priv (padapter) == _FAIL) { - ret8 = _FAIL; - goto exit; - } +if (rtw_init_mlme_priv (padapter) == _FAIL) + goto free_evt_priv;init_mlme_ext_priv (padapter); -if (_rtw_init_xmit_priv (&padapter->xmitpriv, padapter) == _FAIL) { - ret8 = _FAIL; - goto exit; - } +if (_rtw_init_xmit_priv (&padapter->xmitpriv, padapter) == _FAIL) + goto free_mlme_ext; -if (_rtw_init_recv_priv (&padapter->recvpriv, padapter) == _FAIL) { - ret8 = _FAIL; - goto exit; - } +if (_rtw_init_recv_priv (&padapter->recvpriv, padapter) == _FAIL) + goto free_xmit_priv;/* add for CONFIG_IEEE80211W, none 11w also can use */ spin_lock_init (&padapter->security_key_mutex);/* We don't need to memset padapter->XXX to zero, because adapter is allocated by vzalloc(). */ /* memset((unsigned char *)&padapter->securitypriv, 0, sizeof (struct security_priv)); */ -if (_rtw_init_sta_priv (&padapter->stapriv) == _FAIL) { - ret8 = _FAIL; - goto exit; - } +if (_rtw_init_sta_priv (&padapter->stapriv) == _FAIL) + goto free_recv_priv; padapter->stapriv.padapter = padapter; padapter->setband =GHZ24_50 ;
@@ -719,9 +704,26 @@ u8 rtw_init_drv_sw(struct adapter *padapter)rtw_hal_dm_init (padapter); -exit: +return _SUCCESS; + +free_recv_priv: +_rtw_free_recv_priv (&padapter->recvpriv); + +free_xmit_priv: +_rtw_free_xmit_priv (&padapter->xmitpriv); + +free_mlme_ext: +free_mlme_ext_priv (&padapter->mlmeextpriv); -return ret8; +rtw_free_mlme_priv (&padapter->mlmepriv); + +free_evt_priv: +rtw_free_evt_priv (&padapter->evtpriv); + +free_cmd_priv: +rtw_free_cmd_priv (&padapter->cmdpriv); + +return _FAIL; }void rtw_cancel_all_timer (struct adapter *padapter)
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 36/47 staging: rtl8723bs: fix a potential memory leak in rtw_init_cmd_priv()
In reply to Sasha LevinFrom: Xiaoke Wang <[email protected]>
[ Upstream commit 708056fba733a73d926772ea4ce9a42d240345da ]
In rtw_init_cmd_priv(), if pcmdpriv->rsp_allocated_buf is allocated in failure, then pcmdpriv->cmd_allocated_buf will be not properly released. Besides, considering there are only two error paths and the first one can directly return, so we do not need implicitly jump to the exit tag to execute the error handler.
So this patch added kfree(pcmdpriv->cmd_allocated_buf); on the error path to release the resource and simplified the return logic of rtw_init_cmd_priv(). As there is no proper device to test with, no runtime testing was performed.
--- drivers/staging/rtl8723bs/core/rtw_cmd.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-)
drivers/staging/rtl8723bs/core/rtw_cmd.c +6 -10
@@ -161,8 +161,6 @@ static struct cmd_hdl wlancmds[] = {int rtw_init_cmd_priv (struct cmd_priv *pcmdpriv) { -int res =0 ; -init_completion (&pcmdpriv->cmd_queue_comp);init_completion (&pcmdpriv->terminate_cmdthread_comp);
@@ -174,18 +172,16 @@ int rtw_init_cmd_priv(struct cmd_priv *pcmdpriv) pcmdpriv->cmd_allocated_buf =rtw_zmalloc (MAX_CMDSZ +CMDBUFF_ALIGN_SZ ); -if (!pcmdpriv->cmd_allocated_buf) { - res = -ENOMEM ; - goto exit; - } +if (!pcmdpriv->cmd_allocated_buf) +return -ENOMEM ; pcmdpriv->cmd_buf = pcmdpriv->cmd_allocated_buf +CMDBUFF_ALIGN_SZ - ((SIZE_PTR )(pcmdpriv->cmd_allocated_buf) & (CMDBUFF_ALIGN_SZ -1 )); pcmdpriv->rsp_allocated_buf =rtw_zmalloc (MAX_RSPSZ +4 );if (!pcmdpriv->rsp_allocated_buf) { - res = -ENOMEM ; - goto exit; +kfree (pcmdpriv->cmd_allocated_buf); +return -ENOMEM ; } pcmdpriv->rsp_buf = pcmdpriv->rsp_allocated_buf +4 - ((SIZE_PTR )(pcmdpriv->rsp_allocated_buf) &3 );
@@ -195,8 +191,8 @@ int rtw_init_cmd_priv(struct cmd_priv *pcmdpriv) pcmdpriv->rsp_cnt =0 ;mutex_init (&pcmdpriv->sctx_mutex); -exit: -return res; + +return 0 ; }static void c2h_wk_callback (struct work_struct *work);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 37/47 staging: rtl8192u: Fix return type of ieee80211_xmit
In reply to Sasha LevinFrom: Nathan Huckleberry <[email protected]>
[ Upstream commit 2851349ac351010a2649e0ff86a1e3d68fe5d683 ]
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition.
The return type of ieee80211_xmit should be changed from int to netdev_tx_t.
--- drivers/staging/rtl8192u/ieee80211/ieee80211.h | 2 +- drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/staging/rtl8192u/ieee80211/ieee80211.h +1 -1
@@ -2178,7 +2178,7 @@ int ieee80211_set_encryption(struct ieee80211_device *ieee);int ieee80211_encrypt_fragment (struct ieee80211_device *ieee,struct sk_buff *frag,int hdr_len); -int ieee80211_xmit (struct sk_buff *skb,struct net_device *dev); +netdev_tx_t ieee80211_xmit (struct sk_buff *skb,struct net_device *dev);void ieee80211_txb_free (struct ieee80211_txb *txb);
drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c +3 -3
@@ -526,7 +526,7 @@ static void ieee80211_query_seqnum(struct ieee80211_device *ieee, } } -int ieee80211_xmit (struct sk_buff *skb,struct net_device *dev) +netdev_tx_t ieee80211_xmit (struct sk_buff *skb,struct net_device *dev) {struct ieee80211_device *ieee =netdev_priv (dev);struct ieee80211_txb *txb =NULL ;
@@ -822,13 +822,13 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)if ((*ieee->hard_start_xmit)(txb, dev) ==0 ) { stats->tx_packets++; stats->tx_bytes +=__le16_to_cpu (txb->payload_size); -return 0 ; +return NETDEV_TX_OK ; }ieee80211_txb_free (txb); } } -return 0 ; +return NETDEV_TX_OK ; failed:spin_unlock_irqrestore (&ieee->lock, flags);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 38/47 staging: octeon: Fix return type of cvm_oct_xmit and cvm_oct_xmit_pow
In reply to Sasha LevinFrom: Nathan Huckleberry <[email protected]>
[ Upstream commit b77599043f00fce9253d0f22522c5d5b521555ce ]
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev).
The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition.
The return type of cvm_oct_xmit and cvm_oct_xmit_pow should be changed from int to netdev_tx_t.
--- drivers/staging/octeon/ethernet-tx.c | 4 ++-- drivers/staging/octeon/ethernet-tx.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/staging/octeon/ethernet-tx.c +2 -2
@@ -125,7 +125,7 @@ static void cvm_oct_free_tx_skbs(struct net_device *dev)* * Returns Always returns NETDEV_TX_OK */ -int cvm_oct_xmit (struct sk_buff *skb,struct net_device *dev) +netdev_tx_t cvm_oct_xmit (struct sk_buff *skb,struct net_device *dev) {union cvmx_pko_command_word0 pko_command;union cvmx_buf_ptr hw_buffer;
@@ -506,7 +506,7 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)* @dev: Device info structure * Returns Always returns zero */ -int cvm_oct_xmit_pow (struct sk_buff *skb,struct net_device *dev) +netdev_tx_t cvm_oct_xmit_pow (struct sk_buff *skb,struct net_device *dev) {struct octeon_ethernet *priv =netdev_priv (dev);void *packet_buffer;
drivers/staging/octeon/ethernet-tx.h +2 -2
@@ -5,8 +5,8 @@* Copyright (c) 2003-2007 Cavium Networks */ -int cvm_oct_xmit (struct sk_buff *skb,struct net_device *dev); -int cvm_oct_xmit_pow (struct sk_buff *skb,struct net_device *dev); +netdev_tx_t cvm_oct_xmit (struct sk_buff *skb,struct net_device *dev); +netdev_tx_t cvm_oct_xmit_pow (struct sk_buff *skb,struct net_device *dev);int cvm_oct_transmit_qos (struct net_device *dev,void *work_queue_entry,int do_free,int qos);void cvm_oct_tx_initialize (void );
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 39/47 scsi: tracing: Fix compile error in trace_array calls when TRACING is disabled
In reply to Sasha LevinFrom: Arun Easi <[email protected]>
[ Upstream commit 1a77dd1c2bb5d4a58c16d198cf593720787c02e4 ]
Fix this compilation error seen when CONFIG_TRACING is not enabled:
drivers/scsi/qla2xxx/qla_os.c: In function 'qla_trace_init':drivers/scsi/qla2xxx/qla_os.c:2854:25: error: implicit declaration of function 'trace_array_get_by_name'; did you mean 'trace_array_set_clr_event'? [-Werror=implicit-function-declaration]
2854 | qla_trc_array = trace_array_get_by_name("qla2xxx");
| ^~~~~~~~~~~~~~~~~~~~~~~
| trace_array_set_clr_eventdrivers/scsi/qla2xxx/qla_os.c: In function 'qla_trace_uninit':drivers/scsi/qla2xxx/qla_os.c:2869:9: error: implicit declaration of function 'trace_array_put' [-Werror=implicit-function-declaration]
2869 | trace_array_put(qla_trc_array);
| ^~~~~~~~~~~~~~~--- include/linux/trace.h | 36 ++++++++++++++++++++++++++++++++++-- 1 file changed, 34 insertions(+), 2 deletions(-)
include/linux/trace.h +34 -2
@@ -2,8 +2,6 @@#ifndef _LINUX_TRACE_H#define _LINUX_TRACE_H -#ifdef CONFIG_TRACING -#define TRACE_EXPORT_FUNCTION BIT(0)#define TRACE_EXPORT_EVENT BIT(1)#define TRACE_EXPORT_MARKER BIT(2)
@@ -28,6 +26,8 @@ struct trace_export {int flags; }; +#ifdef CONFIG_TRACING +int register_ftrace_export (struct trace_export *export);int unregister_ftrace_export (struct trace_export *export);
@@ -48,6 +48,38 @@ void osnoise_arch_unregister(void);void osnoise_trace_irq_entry (int id);void osnoise_trace_irq_exit (int id,const char *desc); +#else /* CONFIG_TRACING */ +static inline int register_ftrace_export (struct trace_export *export) +{ +return -EINVAL ; +} +static inline int unregister_ftrace_export (struct trace_export *export) +{ +return 0 ; +} +static inline void trace_printk_init_buffers (void ) +{ +} +static inline int trace_array_printk (struct trace_array *tr,unsigned long ip, +const char *fmt, ...) +{ +return 0 ; +} +static inline int trace_array_init_printk (struct trace_array *tr) +{ +return -EINVAL ; +} +static inline void trace_array_put (struct trace_array *tr) +{ +} +static inline struct trace_array *trace_array_get_by_name (const char *name) +{ +return NULL ; +} +static inline int trace_array_destroy (struct trace_array *tr) +{ +return 0 ; +}#endif /* CONFIG_TRACING */ #endif /* _LINUX_TRACE_H */
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 40/47 ext2: Use kvmalloc() for group descriptor array
In reply to Sasha LevinFrom: Jan Kara <[email protected]>
[ Upstream commit e7c7fbb9a8574ebd89cc05db49d806c7476863ad ]
Array of group descriptor block buffers can get rather large. In theory in can reach 1MB for perfectly valid filesystem and even more for maliciously crafted ones. Use kvmalloc() to allocate the array to avoid straining memory allocator with large order allocations unnecessarily.
--- fs/ext2/super.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
fs/ext2/super.c +3 -3
@@ -163,7 +163,7 @@ static void ext2_put_super (struct super_block * sb) db_count = sbi->s_gdb_count;for (i =0 ; i < db_count; i++)brelse (sbi->s_group_desc[i]); -kfree (sbi->s_group_desc); +kvfree (sbi->s_group_desc);kfree (sbi->s_debts);percpu_counter_destroy (&sbi->s_freeblocks_counter);percpu_counter_destroy (&sbi->s_freeinodes_counter);
@@ -1080,7 +1080,7 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent) } db_count = (sbi->s_groups_count +EXT2_DESC_PER_BLOCK (sb) -1 ) /EXT2_DESC_PER_BLOCK (sb); - sbi->s_group_desc =kmalloc_array (db_count, + sbi->s_group_desc =kvmalloc_array (db_count,sizeof (struct buffer_head *),GFP_KERNEL );if (sbi->s_group_desc ==NULL ) {
@@ -1206,7 +1206,7 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent)for (i =0 ; i < db_count; i++)brelse (sbi->s_group_desc[i]); failed_mount_group_desc: -kfree (sbi->s_group_desc); +kvfree (sbi->s_group_desc);kfree (sbi->s_debts); failed_mount:brelse (bh);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 41/47 nvme: copy firmware_rev on each init
In reply to Sasha LevinFrom: Keith Busch <[email protected]>
[ Upstream commit a8eb6c1ba48bddea82e8d74cbe6e119f006be97d ]
The firmware revision can change on after a reset so copy the most recent info each time instead of just the first time, otherwise the sysfs firmware_rev entry may contain stale data.
--- drivers/nvme/host/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/nvme/host/core.c +2 -1
@@ -2732,7 +2732,6 @@ static int nvme_init_subsystem(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)nvme_init_subnqn (subsys, ctrl, id);memcpy (subsys->serial, id->sn,sizeof (subsys->serial));memcpy (subsys->model, id->mn,sizeof (subsys->model)); -memcpy (subsys->firmware_rev, id->fr,sizeof (subsys->firmware_rev)); subsys->vendor_id =le16_to_cpu (id->vid); subsys->cmic = id->cmic; subsys->awupf =le16_to_cpu (id->awupf);
@@ -2939,6 +2938,8 @@ static int nvme_init_identify(struct nvme_ctrl *ctrl) ctrl->quirks |= core_quirks[i].quirks; } } +memcpy (ctrl->subsys->firmware_rev, id->fr, +sizeof (ctrl->subsys->firmware_rev));if (force_apst && (ctrl->quirks &NVME_QUIRK_NO_DEEPEST_PS )) {dev_warn (ctrl->device,"forcibly allowing all power states due to nvme_core.force_apst -- use at your own risk\n" );
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 42/47 nvmet-tcp: add bounds check on Transfer Tag
In reply to Sasha LevinFrom: Varun Prakash <[email protected]>
[ Upstream commit b6a545ffa2c192b1e6da4a7924edac5ba9f4ea2b ]
ttag is used as an index to get cmd in nvmet_tcp_handle_h2c_data_pdu(), add a bounds check to avoid out-of-bounds access.
--- drivers/nvme/target/tcp.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/nvme/target/tcp.c +9 -2
@@ -934,10 +934,17 @@ static int nvmet_tcp_handle_h2c_data_pdu(struct nvmet_tcp_queue *queue)struct nvme_tcp_data_pdu *data = &queue->pdu.data;struct nvmet_tcp_cmd *cmd; -if (likely (queue->nr_cmds)) +if (likely (queue->nr_cmds)) { +if (unlikely (data->ttag >= queue->nr_cmds)) { +pr_err ("queue %d: received out of bound ttag %u, nr_cmds %u\n" , + queue->idx, data->ttag, queue->nr_cmds); +nvmet_tcp_fatal_error (queue); +return -EPROTO ; + } cmd = &queue->cmds[data->ttag]; -else + }else { cmd = &queue->connect; + }if (le32_to_cpu (data->data_offset) != cmd->rbytes_done) { pr_err("ttag %u unexpected data offset %u (expected %u)\n",
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 43/47 usb: idmouse: fix an uninit-value in idmouse_open
In reply to Sasha LevinFrom: Dongliang Mu <[email protected]>
[ Upstream commit bce2b0539933e485d22d6f6f076c0fcd6f185c4c ]
In idmouse_create_image, if any ftip_command fails, it will go to the reset label. However, this leads to the data in bulk_in_buffer[HEADER..IMGSIZE] uninitialized. And the check for valid image incurs an uninitialized dereference.
Fix this by moving the check before reset label since this check only be valid if the data after bulk_in_buffer[HEADER] has concrete data.
Note that this is found by KMSAN, so only kernel compilation is tested.
--- drivers/usb/misc/idmouse.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/usb/misc/idmouse.c +4 -4
@@ -177,10 +177,6 @@ static int idmouse_create_image(struct usb_idmouse *dev) bytes_read += bulk_read; } -/* reset the device */ -reset: -ftip_command (dev,FTIP_RELEASE ,0 ,0 ); -/* check for valid image */ /* right border should be black (0x00) */ for (bytes_read =sizeof (HEADER )-1 +WIDTH -1 ; bytes_read <IMGSIZE ; bytes_read +=WIDTH )
@@ -192,6 +188,10 @@ static int idmouse_create_image(struct usb_idmouse *dev)if (dev->bulk_in_buffer[bytes_read] !=0xFF )return -EAGAIN ; +/* reset the device */ +reset: +ftip_command (dev,FTIP_RELEASE ,0 ,0 ); +/* should be IMGSIZE == 65040 */ dev_dbg (&dev->interface->dev,"read %d bytes fingerprint data\n" , bytes_read);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 44/47 fsi: master-ast-cf: Fix missing of_node_put in fsi_master_acf_probe
In reply to Sasha LevinFrom: Lv Ruyi <[email protected]>
[ Upstream commit 182d98e00e4745fe253cb0c24c63bbac253464a2 ]
of_parse_phandle returns node pointer with refcount incremented, use of_node_put() on it when done.
--- drivers/fsi/fsi-master-ast-cf.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/fsi/fsi-master-ast-cf.c +2 -0
@@ -1324,12 +1324,14 @@ static int fsi_master_acf_probe(struct platform_device *pdev) } master->cvic =devm_of_iomap (&pdev->dev, np,0 ,NULL );if (IS_ERR (master->cvic)) { +of_node_put (np); rc =PTR_ERR (master->cvic);dev_err (&pdev->dev,"Error %d mapping CVIC\n" , rc); goto err_free; } rc =of_property_read_u32 (np,"copro-sw-interrupts" , &master->cvic_sw_irq); +of_node_put (np);if (rc) {dev_err (&pdev->dev,"Can't find coprocessor SW interrupt\n" ); goto err_free;
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 45/47 sbitmap: fix lockup while swapping
In reply to Sasha LevinFrom: Hugh Dickins <[email protected]>
[ Upstream commit 30514bd2dd4e86a3ecfd6a93a3eadf7b9ea164a0 ]
Commit 4acb83417cad ("sbitmap: fix batched wait_cnt accounting") is a big improvement: without it, I had to revert to before commit 040b83fcecfb ("sbitmap: fix possible io hung due to lost wakeup") to avoid the high system time and freezes which that had introduced.
Now okay on the NVME laptop, but 4acb83417cad is a disaster for heavy swapping (kernel builds in low memory) on another: soon locking up in sbitmap_queue_wake_up() (into which __sbq_wake_up() is inlined), cycling around with waitqueue_active() but wait_cnt 0 . Here is a backtrace, showing the common pattern of outer sbitmap_queue_wake_up() interrupted before setting wait_cnt 0 back to wake_batch (in some cases other CPUs are idle, in other cases they're spinning for a lock in dd_bio_merge()):
sbitmap_queue_wake_up < sbitmap_queue_clear < blk_mq_put_tag < __blk_mq_free_request < blk_mq_free_request < __blk_mq_end_request < scsi_end_request < scsi_io_completion < scsi_finish_command < scsi_complete < blk_complete_reqs < blk_done_softirq < __do_softirq < __irq_exit_rcu < irq_exit_rcu < common_interrupt < asm_common_interrupt < _raw_spin_unlock_irqrestore < __wake_up_common_lock < __wake_up < sbitmap_queue_wake_up < sbitmap_queue_clear < blk_mq_put_tag < __blk_mq_free_request < blk_mq_free_request < dd_bio_merge < blk_mq_sched_bio_merge < blk_mq_attempt_bio_merge < blk_mq_submit_bio < __submit_bio < submit_bio_noacct_nocheck < submit_bio_noacct < submit_bio < __swap_writepage < swap_writepage < pageout < shrink_folio_list < evict_folios < lru_gen_shrink_lruvec < shrink_lruvec < shrink_node < do_try_to_free_pages < try_to_free_pages < __alloc_pages_slowpath < __alloc_pages < folio_alloc < vma_alloc_folio < do_anonymous_page < __handle_mm_fault < handle_mm_fault < do_user_addr_fault < exc_page_fault < asm_exc_page_fault
See how the process-context sbitmap_queue_wake_up() has been interrupted, after bringing wait_cnt down to 0 (and in this example, after doing its wakeups), before advancing wake_index and refilling wake_cnt: an interrupt-context sbitmap_queue_wake_up() of the same sbq gets stuck.
I have almost no grasp of all the possible sbitmap races, and their
consequences: but __sbq_wake_up() can do nothing useful while wait_cnt 0, so it is better if sbq_wake_ptr() skips on to the next ws in that case:
which fixes the lockup and shows no adverse consequence for me.
The check for wait_cnt being 0 is obviously racy, and ultimately can lead to lost wakeups: for example, when there is only a single waitqueue with waiters. However, lost wakeups are unlikely to matter in these cases, and a proper fix requires redesign (and benchmarking) of the batched wakeup code: so let's plug the hole with this bandaid for now.
--- lib/sbitmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
lib/sbitmap.c +1 -1
@@ -517,7 +517,7 @@ static struct sbq_wait_state *sbq_wake_ptr(struct sbitmap_queue *sbq)for (i =0 ; i <SBQ_WAIT_QUEUES ; i++) {struct sbq_wait_state *ws = &sbq->ws[wake_index]; -if (waitqueue_active (&ws->wait)) { +if (waitqueue_active (&ws->wait) &&atomic_read (&ws->wait_cnt)) {if (wake_index !=atomic_read (&sbq->wake_index))atomic_set (&sbq->wake_index, wake_index);return ws;
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 46/47 clk: bcm2835: Make peripheral PLLC critical
In reply to Sasha LevinFrom: Maxime Ripard <[email protected]>
[ Upstream commit 6c5422851d8be8c7451e968fd2e6da41b6109e17 ]
When testing for a series affecting the VEC, it was discovered that turning off and on the VEC clock is crashing the system.
It turns out that, when disabling the VEC clock, it's the only child of the PLLC-per clock which will also get disabled. The source of the crash is PLLC-per being disabled.
It's likely that some other device might not take a clock reference that it actually needs, but it's unclear which at this point. Let's make PLLC-per critical so that we don't have that crash.
--- drivers/clk/bcm/clk-bcm2835.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/bcm/clk-bcm2835.c +1 -1
@@ -1785,7 +1785,7 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { .load_mask = CM_PLLC_LOADPER, .hold_mask = CM_PLLC_HOLDPER, .fixed_divider = 1, - .flags = CLK_SET_RATE_PARENT), + .flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),/* * PLLD is the display PLL, used to drive DSI display panels.
Signature · 7 lines
2.35.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Sasha Levin
maintainerPATCH 47/47 clk: bcm2835: Round UART input clock up
In reply to Sasha LevinFrom: "Ivan T. Ivanov" <[email protected]>
[ Upstream commit f690a4d7a8f66430662975511c86819dc9965bcc ]
It was reported that RPi3[1] and RPi Zero 2W boards have issues with the Bluetooth. It turns out that when switching from initial to operation speed host and device no longer can talk each other because host uses incorrect UART baud rate.
The UART driver used in this case is amba-pl011. Original fix, see below Github link[2], was inside pl011 module, but somehow it didn't look as the right place to fix. Beside that this original rounding function is not exactly perfect for all possible clock values. So I deiced to move the hack to the platform which actually need it.
The UART clock is initialised to be as close to the requested frequency as possible without exceeding it. Now that there is a clock manager that returns the actual frequencies, an expected 48MHz clock is reported as 47999625. If the requested baud rate == requested clock/16, there is no headroom and the slight reduction in actual clock rate results in failure.
If increasing a clock by less than 0.1% changes it from ..999.. to ..000.., round it up.
[1] https://bugzilla.suse.com/show_bug.cgi?id=1188238
[2] https://github.com/raspberrypi/linux/commit/ab3f1b39537f6d3825b8873006fbe2fc5ff057b7
--- drivers/clk/bcm/clk-bcm2835.c | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-)
drivers/clk/bcm/clk-bcm2835.c +33 -2
@@ -30,6 +30,7 @@#include <linux/debugfs.h> #include <linux/delay.h> #include <linux/io.h> +#include <linux/math.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/platform_device.h>
@@ -502,6 +503,8 @@ struct bcm2835_clock_data {bool low_jitter;u32 tcnt_mux; + +bool round_up; };struct bcm2835_gate_data {
@@ -994,12 +997,34 @@ static long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,return temp; } +static unsigned long bcm2835_round_rate (unsigned long rate) +{ +unsigned long scaler; +unsigned long limit; + + limit = rate /100000 ; + + scaler =1 ; +while (scaler < limit) + scaler *=10 ; + +/* +* If increasing a clock by less than 0.1% changes it +* from ..999.. to ..000.., round up. +*/ +if ((rate + scaler -1 ) / scaler %1000 ==0 ) + rate =roundup (rate, scaler); + +return rate; +} +static unsigned long bcm2835_clock_get_rate (struct clk_hw *hw,unsigned long parent_rate) {struct bcm2835_clock *clock =bcm2835_clock_from_hw (hw);struct bcm2835_cprman *cprman = clock->cprman;const struct bcm2835_clock_data *data = clock->data; +unsigned long rate;u32 div;if (data->int_bits ==0 && data->frac_bits ==0 )
@@ -1007,7 +1032,12 @@ static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw, div =cprman_read (cprman, data->div_reg); -return bcm2835_clock_rate_from_divisor (clock, parent_rate, div); + rate =bcm2835_clock_rate_from_divisor (clock, parent_rate, div); + +if (data->round_up) + rate =bcm2835_round_rate (rate); + +return rate; }static void bcm2835_clock_wait_busy (struct bcm2835_clock *clock)
@@ -2144,7 +2174,8 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { .div_reg = CM_UARTDIV, .int_bits = 10, .frac_bits = 12, - .tcnt_mux = 28), + .tcnt_mux = 28, + .round_up = true),/* TV encoder clock. Only operating frequency is 108Mhz. */ [BCM2835_CLOCK_VEC] = REGISTER_PER_CLK(
Signature · 1 line
2.35.1